- Rigg & sail
- Rope & cordage
- Anchoring & mooring
-
Hull & deck
- Sheet winches & halyard winches
- Cleats, clutches & CLAMCLEAT
- Tracks & slides
- Chain plates & stemhead fittings
- Pad eyes & fairleads
- Hooks & eyelets
- Hand rails
- Flags & flagstaffs
- Portlights & hatches
- Ventilation
- Steering wheels, tillers & rudders
- Specialities for motorboats
- Dinghys & rowboats
- Letters & plates
- Navigation lights
- Outdoor lights & deck spots
- Cabin & comfort
- Paint & boatbuilding
- Electrics & engine
- Pumps & sanitation
- Safety & VHF radio
- Navigation & books
- Commercial shipping
Portholes
Small, polished or chromed porthole. Plexiglass design (with CE certification). Comes with sealing ring and concealed screws. Weight approx. 1.7 kg.
Light-quality port of brass or chromed brass to be installed from inside.Comes complete with matching outer ring, drilled.With soft-rubber seal.Weight: 5 kg.CE-certified design (CE-category A to D, Areas I, III, IV) with plexiglass (PMMA-Glass).
Opening bullseye with patented stainless steel closure.Stamped and drawn A2 stainless steel-plate window, polished finish.The frame has countersunk holes. Comes complete with matching outside ring.Pane of hardened safety glass, 6 mm.Inexpensive top-quality port. These windows are CE certified (Category A, Areas III and IV). Manufactured in Holland.Fits for various wall depths, because of its flexible backing ring.Also appropriate for interior uses (in doors or decoration).
Solid brass design for screwing in from the inside.Pins and hinge bolts made of V4A steel, hardened toughened safety glass (up to 8" portholes 8 mm thick, from 10" portholes 10 mm thick), special neoprene rubber seal.The window complies with the CE standard. A CE certificate is available.Standard delivery: sandblasted brass, undrilled.The counter-ring for the window is also available, as is the window with additional sea defences. You will find both further down on this page under "Similar products".
Solid brass design for screwing in from the inside.Pins and hinge bolts made of V4A steel, hardened toughened safety glass (up to 8" portholes 8 mm thick, from 10" portholes 10 mm thick), special neoprene rubber seal.The window complies with the CE standard. A CE certificate is available.Standard delivery: sandblasted brass, undrilled.The window is fitted on the inside with an additional deadlight, which is folded upwards for opening. The deadlight is made of shipbuilding steel, primed and fitted with welded-on hinge parts. A hard rubber seal is inserted into the panel.The window frame can be hinged on the top, right or left. Select your desired combination from the table below.The delivery time for the window with deadlight in your desired combination is 6 to 8 weeks.The counter-ring to the window is also available, as is the window without additional deadlight. You will find both further down on this page under "Similar products".
Counter frame for portlight (Article-No. 1815-...), brass drilled, without screw holes.
Round bronze fixed port, chrome plated. Frame drilled with countersunk fastener holes. Sand-cast bronze, polished on the visible side.The glass is held in place with a ring nut and is sealed with silicone.Not CE-ceritified.
Round brass port with polished or chromed finish. Equipped with hardened glass.The brass pieces are precisely machine cast, the hinges are made of stainless steel and the seal is neoprene rubber.These ports are not only used in boatbuilding, but also in many other areas of interior decoration. A light and inexpensive port with high functionality.Comes completely ready for installation and drilled, with a matching backing ring for the exterior.Such spare parts as seals, turning nuts, etc. are available.These bullseye ports with glass panes are not CE certified. For that, choose the same ports with Plexiglas panes (Article-No. 1740-...).
Light brass design, with a polished or chromed finish.The ports come ready for installation: drilled, with outer ring and sleeve bolts M4 x 16 mm.Glass depth 4 mm.Weight approx. 750 g.Comes with a glass pane.The glass pane version is not CE certified, may be used in certain areas of boatbuilding (not in areas of the boat exposed to the direct brunt of the sea), appropriate for decoration and for interior applications.Also available as CE certified version with PMMA pane.
Opening port. Heavy duty, also intended for installation in the hull. On the tapered frame of shipbuilding steel, (St 37 material thickness, 10 mm) is a brass window ring with hinge pins (D = 10 mm). Seal: Neoprene rubber profile. Glass: hardened single-pane safety glass (thickness 8 mm). Made pursuant to ISO (maritime) regulations and CE norms. Steel screens are available for these ports.
Opening portlights with steel deadlight. Steel flange to weld in.Heavy-duty, also intended for installation in the transom.Brass window frame and steel deadlight are attached with hinge bolts (D = 10 mm) on a tapering frame made from ship-building steel St. 37 (10 mm thick).Gasket: Neoprene rubber.Glass: Hardened single-pane safety glass (depth 8 mm).Manufactured to ISO (maritime) and CE standards.
Fixed port, heavy-duty quality. The brass port ring comes with hinge bolts (D = 10 mm) on a tapering frame made from ship-building steel St. 37 (depth 10 mm)Gasket: Neoprene rubber.Glass: Hardened single-pane safety glass (thickness 8 mm).Manufactured to ISO (maritime) and CE standards.Steel deadlingts are also available for these ports.
Robust rectangular brass ship windows ready to open, made according to ISO3903 with the frame as a brass hinged frame for mounting from the inside (Code IRB), tightened to the main frame by 2 bolt nuts M20 (or 4 for the bigger sizes).The Rubber sealing is made from neoprene, with stainless steel spindles, the window pane is made from 12 mm thick single security glass. Many separate designs are available on request, like for example with hinges on the left or with window panes made from insulation glass.
Robust rectangular brass ship windows ready to open, made according to ISO3903 with the frame as a frame for welding made from 10 mm shipbuilding steel (Code IRW).The Rubber sealing made from neoprene, with stainless steel spindles, window pane made from 12 mm thick single security glass. Many separate designs are available on request, like for example with hinges on the left or with window panes made from insulation glass.
Fixed port. Mid quality. Brass, attaches with screws.Available with two surface options:Cleanly turned polished brass or matte chromed brass.Hardened single-pane safety glass, depth 8 mm.CE-certified.Also available with deadlight.
Brass portlight frame for portlight art.-no. 1873-.... accurate drilled, not polished.
Heavy-duty bronze port for installation from inside.Comes complete with matching drilled outer ring.Soft-rubber seal.Tapered outward so rainwater won't flow into the boat.Not CE-certified.
Heavy-duty port made from seawater-resistant bronze for installation from inside.Comes complete with matching drilled outer ring.Soft-rubber seal.
Polished brass portlight frames, oval design, drilled, without glass.
Brass portlight frame, polished or chromed, round design, with screw holes, without glass.
