DHR Navigationlights Typ 55N | TOPLICHT

To be able to use the full range of Shopware 6, we recommend activating Javascript in your browser.

Art. No.	description	model	colour	angle (°)	range (nm)	Price (unit)	Delivery time	Note list	Buy

Description

MED-approved navigation lights for pleasure boats and commercial vessels up to 50 m length, or for inland vessels of unlimited length.

The housings are made of black, fiberglass-reinforced plastic, the lenses are made of polycarbonate and the bezels are made of stainless steel.

The navigation lights have a PG13 cable gland and IP56 protection.

For the full circle lanterns (angle 360°) the conversion set (art.no. 3337-100) is required for hoisting.

Socket: BaY15d.
Supplied without bulbs.

Questions about the product?

Talk to craftsmen, boat builders and sailors. We understand your questions and provide the right answers.

Contact experts

BSH certificate

Bulb for navigation light BaY15d 12 v / 24 v

Bulb for navigation light BaY15d 12 v / 24 v

Bulb for navigation light / postion lantern with bayonet socket BaY15d. Optionally for 12 or 24 volts.For vessels under 20 m: stern and anchor light require 10 W, all other lanterns 25 W.Please note: The bulb is part of the approval of navigation light. If an incandescent lamp without approval is used as replacement, the approval of the complete lantern expires. Therefore, it only makes sense to have approved bulbs on board as a reserve.Our marine light bulbs come from Danlamp, Peters & Bey or the RADIUM brand. They have the required approval (type examination by the BSH - Bundesamt für Seeschifffahrt und Hydrographie).

From €12.00 *

LED BaY15d 10-30 v

LED BaY15d 10-30 v

This LED modul is equipped with 30 bright LEDs.It fits in the BaY15d socket of navigation lights. It can replace the classic navigation bulbs.Consumption is only 3 W, 350 lm, 3000K. This LED lamp is not approved for the use in navigation lights!Bulb socket BaY15d.For 10 - 30 volt.

€20.90 *

More Products from Category DEN HAAN ROTTERDAM

3336*04 DHR 35 Montage-Adapter

DHR 35 Mounting Adapter

Original adapter feet from DEN HAAN ROTTERDAM for the navigation and signal lights of the 35 series. With the adapters all lanterns - except the heatable version - can be converted. The mast and angle adapters are made of seawater-resistant stainless steel, the foot base and the tube adapter are made of robust plastic. The adapters are simply screwed onto the lantern from below with a plastic ring.

From €55.00 *

3336*01 DHR 35 Navigationslichter

DHR 35 Navigation Lights

A compact navigation light with matte black, fiberglass-reinforced polycarbonate housing. It features corrosion resistant stainless steel bezels and a shock resistant polycarbonate Fresell lens.The sidelights are supplied as standard with an A2 bracket for side mounting, the glider and top lanterns have a screw-on base. However, it is possible to customize the lamps with a separately ordered mounting adapter.Connection is via a PG9 cable gland from the bottom of the lantern. MED approval for vessels up to 20 m in length in inland and maritime navigation.Technical specifications:Weight: 300 gVisibility: 2-3 nmProtection class: IP56Bulb socket: BaY15dVoltage: 12-24VPower: max. 25WSupplied without bulb.

From €66.00 *

3336*02 DHR35 Vollkreislaternen

DHR 35 Signal light 360°

The all-round lights of the Series 35 by the Dutch manufacturer DEN HAAN ROTTERDAM stand out with their compact design and robust construction. The housing is made of black, glass fiber reinforced polycarbonate, which is corrosion-resistant, seawater-resistant, and non-magnetic.The Fresnel lens is also made of polycarbonate and is shock-resistant. Connection is made via a PG9 cable gland from the underside of the lantern.The hoistable signal lights are supplied with two mounting lugs, while the other signal lights come with a standard mounting base. Additional mounting bases are also available.MED-approved navigation lights for vessels up to 20 m in length for inland and maritime navigation.Available as an anchor light (also hoistable), as a red signal light (also hoistable), as a green signal light, and as a yellow signal light.Technical specifications:Weight: 300 gBulb socket: BaY15dProtection class: IP56Voltage: 12–24VPower: max. 25WBulb not included.

From €65.50 *

DHR 35 wind-indicator adapter

DHR 35 wind-indicator adapter

Adapter for wind indicator suitable for navigation light series DHR 35.

€14.90 *

3366*01 DHR 60 Navigationslichter

DHR 60 LED Navigation Lights

Premium-quality LED navigation lights for seagoing vessels between 20 m and 50 m in length and inland vessels longer than 20 m.Approved according to MED 2014/90/EU and USCG.Technical specifications:Black, hard-anodized seawater-resistant aluminumPOM insulation sleeves to protect against galvanic corrosionLens made of borosilicate glassLED driver encapsulated in epoxy for maximum protectionWeight: 2.1 kgService life: 50,000 hoursVisibility: 2 to 5 N.M.Operating temperature: -25 to 55°CProtection class: IP66Power supply: 24V DC

From €675.00 *

DHR Anchor lights 5" made from brass

DHR Anchor lights 5" made from brass

Anchor lantern from the professional maritime industry with international certification (not BSH certified).Brass housing, painted clear, with a 5" glass fresnel all-around lens.The top opens. Comes with 2 hanging brackets.Available designs:Paraffin (kerosene) design: burner with 0.3 l tank for approx. 40 hours of burning time. Comes with 6'''- lamp cylinder.Electric design: E27 socket, max 40 W, without cylinder. Cord entrance from the top, the bottom has a white plastic lens that allows light to shine below.Originally developed for onboard use, these navigation lights are still used on traditional ships, when classic optics are needed. Also intended for use as atmospheric lighting at home. However, lamps from DEN HAAN ROTTERDAM have no official approval and are not intended as navigation lights on ships!

From €236.00 *

DHR Navigation lights 4" made from copper

DHR Navigation lights 4" made from copper

Originally developed for onboard use, these navigation lights are still used on traditional ships, when classic optics are needed. Also intended for use as atmospheric lighting at home. These lamps are made from corrosion-free copper sheeting.However, lamps from DEN HAAN ROTTERDAM have no official approval and are not intended as navigation lights on ships!Available in paraffin or electric designs, these small, polished copper-plate lamps with 4-inch fresnel glass lenses are available in the following designs:Paraffin anchor light: burner with 125 ml brass tank for approx. 40 hours of burning and 5'''- Perkeo cylinder. Electric anchor light:E14 socket, cord entry from the top, frosted-glass, without cylinder. Paraffin side and masthead lights: with 50 ml tank for approx. 15 hours of burning time. Electric side and masthead lights: with cord, switch, plug, und socket on the floor, without cylinder. Paraffin lamps are a sensible alternative or addition to electric lighting. They give off a warm, cozy and, at similar sizes, equally bright light.The burner size on paraffin lamps is traditionally given in candlepower (shortened to ''').

From €191.99 *

DHR Navigation lights 6" made from brass

DHR Navigation lights 6" made from brass

Polished, lacquered plate-brass lantern with 6" glass fresnel lens. Originally developed for onboard use, these navigation lights are still used on traditional ships, when classic optics are needed. Also intended for use as atmospheric lighting at home. However, lamps from DEN HAAN ROTTERDAM have no official approval and are not intended as navigation lights on ships!Available in the following designs:Paraffin (kerosene): 10''' lamp cylinder and round burner with 0.3 l tank for approx. 30 hours. Electric: E27 socket, max 60 W. Anchor lantern with cord entry from above and white plexiglass floor. Lanterns with the cord entry on the back and socket on the bottom are also available. No cylinder.These lanterns are not certified for use as navigation lights on seagoing vessels.Paraffin lamps are a sensible alternative or addition to electric lighting. They give off a warm, cozy and, at similar sizes, equally bright light.The burner size on paraffin lamps is traditionally given in candlepower (shortened to ''').

From €250.99 *

DHR Navigation lights 7" made from brass

DHR Navigation lights 7" made from brass

Sturdy anchor lantern from DEN HAAN ROTTERDAM, for the professional maritime industry with international certification (not BSH certified). Brass housing, painted gray, with a 7" glass fresnel all-around lens.Available in the following designs:Paraffin (kerosene): 10''' round burner with 0.85 l tank for approx. 60 hours of burning time. Electric: E37 socket, max 60 W. Cord entry from above. The white plastic bottom allows the light to also shine down. No cylinder.Originally developed for onboard use, these navigation lights are still used on traditional ships, when classic optics are needed. Also intended for use as atmospheric lighting at home. However, lamps from DEN HAAN ROTTERDAM have no official approval and are not intended as navigation lights on ships!

From €399.00 *

DHR Navigation lights 8" made from copper

DHR Navigation lights 8" made from copper

Large lantern made of polished, treated copper plate with 8" glass Fresnel lens. Originally developed for onboard use, these navigation lights are still used on traditional ships, when classic optics are needed. Also intended for use as atmospheric lighting at home. However, lamps from DEN HAAN ROTTERDAM have no official approval and are not intended as navigation lights on ships!The following designs are available.Paraffin (kerosene): 14''' lamp cylinder and round burner with 0.85 l tank for approx. 65 hours of burning time. Electric: E27 socket, max 100 W. Cord switch and plug. No cylinder.Paraffin lamps are a sensible alternative or addition to electric lighting. They give off a warm, cozy and, at similar sizes, equally bright light.The burner size on paraffin lamps is traditionally given in candlepower (shortened to '''). Please click on "Downloads & Information" to get a feel for the light strength of paraffin lamps.

From €444.00 *

DHR Navigationlights Typ 55N

DHR Navigationlights Typ 55N

MED-approved navigation lights for pleasure boats and commercial vessels up to 50 m length, or for inland vessels of unlimited length.The housings are made of black, fiberglass-reinforced plastic, the lenses are made of polycarbonate and the bezels are made of stainless steel.The navigation lights have a PG13 cable gland and IP56 protection.For the full circle lanterns (angle 360°) the conversion set (art.no. 3337-100) is required for hoisting.Socket: BaY15d.Supplied without bulbs.

From €124.90 *

DHR Propane navigation light

DHR Propane navigation light

The running lights DHR70 with propane gas burner are sturdy traditional navigation lanterns intended for use on ships that for instance are towed or laid up for a longer period of time on a mooring near a fairway.The body is made from galvanized sheet metal, painted black with Fresnel lenses made from glass.The propane burner with integrated pressure regulator (140 mbar) reaches the necessary brightness utilizing a glow unit for gas lamps.The lanterns are licenced for unmanned ships of all ship sizes. Each unit is shipped with a certificate with a serial number.The gas consumption amounts to approx. 19 g/h.Additional accessories like gas bottles, bottle regulators or hoses for LPG are available.

€577.99 *

DHR73 LED signal/flashlight

DHR73 LED signal/flashlight

LED signal lamp developed by DEN HAAN ROTTERDAM for use in commercial shipping, e.g. for the transport of dangerous goods or on work ships.The robust housing is made of chromated, seawater-resistant aluminum and has a white powder coating. The lens is made of UV-resistant borosilicate glass. POM insulating sleeves protect against galvanic corrosion. The LED driver is encapsulated with epoxy and thus particularly well protected against seawater. The use of high-quality LEDs and components guarantees a long service life of 50.000 hours.The special feature of this signal light is the possibility of setting different light frequencies: Continuous light or flash frequencies of 30, 60, 120 or 180 flashes per minute.Power supply: 24 V on-board power supply or 230 V. Operating temperature: -25°C to 55°C. Protection class: IP67. Cable connection: 2x M25x1.5, cable diameter 7-12 mm.

From €529.00 *

DHRAnchor light with wall mounting

DHRAnchor light with wall mounting

Robust 4" (E14) or 6" (E27) anchor lamp, made from lacquered plate brass from DEN HAAN ROTTERDAM. For wall mounting with sturdy screwed-in round cast-brass wall bracket. The clear fresnel lens and matte glass bottom ensure good light distribution. Originally developed for onboard use, these navigation lights are still used on traditional ships, when classic optics are needed. Also intended for use as atmospheric lighting at home.Electric:E14 (max. 40W) or E27 (max. 60W) socket.Direct connection to the wall bracket, no switch.

From €199.00 *

Navigation lights DHR 70N

Navigation lights DHR 70N

Navigation lights for seagoing vessels over 50 m in length. Manufactured by DHR in Rotterdam. The lamps feature a black, glass fiber-reinforced plastic housing and Fresnel lenses made of non-corroding, seawater-resistant polycarbonate, as well as stainless steel side panels.Supplied with a pre-installed 1.5 m cable (H07 RN-F 2x1.5).MED approval for vessels over 50 meters in length.Technical specifications:Protection class: IP56Socket: P28sShock-resistantNon-magnetic24V DC 40W or 115/230V AC 60–65WBulb not included.

From €241.00 *

Replacement socket for DHR35 position lanterns with BaY15d b

Replacement socket for DHR35 position lanterns with BaY15d b

Replacement socket with BaY15d base as spare part for DHR35 position lanterns.Wire end ferrules (e.g. item no. 4364-002) are required for connection to stranded cable (e.g. item no. 2213-115).

€25.00 *

Signalling Lights DHR

Signalling Lights DHR

The DHR115 Signalling Lights from manufacturer De Haan in Rotterdam are robust, lightweight technical marine lights. Their design is reminiscent of a more modern form of classic HNA work and deck lights.These industrial lights with IP66 protection are also suitable for stylish applications on land, e.g. for illuminating house entrances, garages and terraces, for hallway lighting or as indoor lighting. The base of the luminaire is made of A4 stainless steel and carries a high-quality E27 screw socket and a waterproof Pg13 cable entry. The lintel glass is made of borosilicate.We offer the lamp in versions with or without a protective stainless steel cover and with lintel glass in the colours transparent, red, green, yellow and blue.Dimensions: Diameter 120mm (base 96mm)

From €149.00 *

Last seen products

Request sent successfully

Request wasn't send - a error occured. Please try again.