Hand rail teak
Undrilled and unfinished.
Dimensions: approx. 25 mm wide, approx. 60 mm high.
from €14.49*
€14.49
Prices incl. VAT plus shipping costs
Description
Made of teak, milled, cleanly rounded and sanded.
Undrilled and unfinished.
Dimensions: approx. 25 mm wide, approx. 60 mm high.
Beautiful, pleasant to grip, solid handle made of heavy, polished brass. Good for placing in the companionway or other places where a firm grip is required.
Sturdy handle with angled base plate made of heavy polished brass. Well suited for vertical mounting in the companionway, or elsewhere where a safe grip is required.
Made of teak, milled, cleanly rounded and sanded. Undrilled and unfinished. Dimensions: approx. 25 mm wide, approx. 60 mm high.
For our stainless steel hand rails with 45°- and 90° bend we offer an oval or a triangular base plate.
Strong, polished A4 stainless steel (AISI 316) hand rails.The base plates (60 mm in diameter) are equipped with three fastening holes (5 mm).The diameter of the tubing is 25 mm, the clear height is 45 mm.
Strong, polished A2 stainless steel hand rails for mounting from the inside or the back with two M6 shoulder bolts.The diameter of the tube is 25 mm, the clear height is 45 mm, total height is 70 mm.As an alternative we offer these hand rails with 90° bend, too. For the mounting from above an oval (65 x 40 mm) or a triangular base plate (62 x 52 mm) are available.Please see our "Suitable Items" below.
Strong, polished A4 stainless steel hand rails for mounting from the inside or the back with two M6 shoulder bolts. The diameter of the tube is 25 mm, the clear height is 45 mm, total height is 70 mm. As an alternative we offer these hand rails with 45° bend, too. For the mounting from above an oval (65 x 40 mm) or a triangular base plate (65 x 52 mm) are available. Please see our "Suitable Items" below.
Heavy cast-brass handle/hand-hold. Appropriate for a variety of inside and outside uses. Attached from below, using two M5-thread drilled blind holes. Polished or chromed finish.
Delicately curved stern handle.Typical motorboat fitting, but also intended for mounting on dinghy deck transoms.Also works as a hand-hold or chest handle.Cast brass, polished or chromed finish.
