Transom handle polished or chromed brass

Quantity	Unit price
To 4	€19.90*
From 5	€16.90*

Art. No.	version	L (mm)	B (mm)	Price (unit)	Delivery time	Note list	Buy
No products found.

Companionway Handle angled

Sturdy handle with angled base plate made of heavy polished brass. Well suited for vertical mounting in the companionway, or elsewhere where a safe grip is required.

€69.00 *

Details

Hand rail teak

Made of teak, milled, cleanly rounded and sanded. Undrilled and unfinished. Dimensions: approx. 25 mm wide, approx. 60 mm high.

From €14.49 *

Details

Mounting plates for stainless steel hand rail

For our stainless steel hand rails with 45°- and 90° bend we offer an oval or a triangular base plate.

From €16.51 *

Details

Stainless steel hand rail

Strong, polished A2 stainless steel hand rails.The base plates (60 mm in diameter) are equipped with three fastening holes (5 mm).The diameter of the tubing is 25 mm, the clear height is 45 mm.

From €32.90 *

Details

Stainless steel hand rail 45° bend

Strong, polished A4 stainless steel hand rails for mounting from the inside or the back with two M6 shoulder bolts. The diameter of the tube is 25 mm, the clear height is 45 mm, total height is 70 mm. As an alternative we offer these hand rails with 90° bend, too. For the mounting from above an oval (65 x 40 mm) or a triangular base plate (62 x 52 mm) are available. Please see our "Suitable Items" below.

From €42.00 *

Details

Stainless steel hand rail 90° bend

Strong, polished A4 stainless steel hand rails for mounting from the inside or the back with two M6 shoulder bolts. The diameter of the tube is 25 mm, the clear height is 45 mm, total height is 70 mm. As an alternative we offer these hand rails with 45° bend, too. For the mounting from above an oval (65 x 40 mm) or a triangular base plate (65 x 52 mm) are available. Please see our "Suitable Items" below.

From €62.00 *

Details

Strong handle FORESTI

Heavy cast-brass handle/hand-hold. Appropriate for a variety of inside and outside uses. Attached from below, using two M5-thread drilled blind holes. Polished or chromed finish.

From €33.90 *

Details

Transom handle polished or chromed brass

Delicately curved stern handle.Typical motorboat fitting, but also intended for mounting on dinghy deck transoms.Also works as a hand-hold or chest handle.Cast brass, polished or chromed finish.

From €16.90 *

Details

Bow grip

Handhold or hawser grip, also good for various applications belowdecks (for example, drawer handles).Made from cast brass, polished or chromed finish.

From €25.39 *

Details

Companionway Handle

Beautiful, pleasant to grip, solid handle made of heavy, polished brass. Good for placing in the companionway or other places where a firm grip is required.

€69.00 *

Details

Companionway Handle angled

Sturdy handle with angled base plate made of heavy polished brass. Well suited for vertical mounting in the companionway, or elsewhere where a safe grip is required.

€69.00 *

Details

Hand rail teak

Made of teak, milled, cleanly rounded and sanded. Undrilled and unfinished. Dimensions: approx. 25 mm wide, approx. 60 mm high.

From €14.49 *

Details

Mounting plates for stainless steel hand rail

For our stainless steel hand rails with 45°- and 90° bend we offer an oval or a triangular base plate.

From €16.51 *

Details

Stainless steel hand rail

Strong, polished A2 stainless steel hand rails.The base plates (60 mm in diameter) are equipped with three fastening holes (5 mm).The diameter of the tubing is 25 mm, the clear height is 45 mm.

From €32.90 *

Details

Stainless steel hand rail 45° bend

Strong, polished A4 stainless steel hand rails for mounting from the inside or the back with two M6 shoulder bolts. The diameter of the tube is 25 mm, the clear height is 45 mm, total height is 70 mm. As an alternative we offer these hand rails with 90° bend, too. For the mounting from above an oval (65 x 40 mm) or a triangular base plate (62 x 52 mm) are available. Please see our "Suitable Items" below.

From €42.00 *

Details

Stainless steel hand rail 90° bend

Strong, polished A4 stainless steel hand rails for mounting from the inside or the back with two M6 shoulder bolts. The diameter of the tube is 25 mm, the clear height is 45 mm, total height is 70 mm. As an alternative we offer these hand rails with 45° bend, too. For the mounting from above an oval (65 x 40 mm) or a triangular base plate (65 x 52 mm) are available. Please see our "Suitable Items" below.

From €62.00 *

Details

Strong handle FORESTI

Heavy cast-brass handle/hand-hold. Appropriate for a variety of inside and outside uses. Attached from below, using two M5-thread drilled blind holes. Polished or chromed finish.

From €33.90 *

Details

Transom handle polished or chromed brass

Delicately curved stern handle.Typical motorboat fitting, but also intended for mounting on dinghy deck transoms.Also works as a hand-hold or chest handle.Cast brass, polished or chromed finish.

From €16.90 *

Details

Bow grip

Handhold or hawser grip, also good for various applications belowdecks (for example, drawer handles).Made from cast brass, polished or chromed finish.

From €25.39 *

Details

Companionway Handle

Beautiful, pleasant to grip, solid handle made of heavy, polished brass. Good for placing in the companionway or other places where a firm grip is required.

€69.00 *

Details

Companionway Handle angled

Sturdy handle with angled base plate made of heavy polished brass. Well suited for vertical mounting in the companionway, or elsewhere where a safe grip is required.

€69.00 *

Details

Hand rail teak

Made of teak, milled, cleanly rounded and sanded. Undrilled and unfinished. Dimensions: approx. 25 mm wide, approx. 60 mm high.

From €14.49 *

Details

Mounting plates for stainless steel hand rail

For our stainless steel hand rails with 45°- and 90° bend we offer an oval or a triangular base plate.

From €16.51 *

Details

Stainless steel hand rail

Strong, polished A2 stainless steel hand rails.The base plates (60 mm in diameter) are equipped with three fastening holes (5 mm).The diameter of the tubing is 25 mm, the clear height is 45 mm.

From €32.90 *

Details

Stainless steel hand rail 45° bend

Strong, polished A4 stainless steel hand rails for mounting from the inside or the back with two M6 shoulder bolts. The diameter of the tube is 25 mm, the clear height is 45 mm, total height is 70 mm. As an alternative we offer these hand rails with 90° bend, too. For the mounting from above an oval (65 x 40 mm) or a triangular base plate (62 x 52 mm) are available. Please see our "Suitable Items" below.

From €42.00 *

Details

Stainless steel hand rail 90° bend

Strong, polished A4 stainless steel hand rails for mounting from the inside or the back with two M6 shoulder bolts. The diameter of the tube is 25 mm, the clear height is 45 mm, total height is 70 mm. As an alternative we offer these hand rails with 45° bend, too. For the mounting from above an oval (65 x 40 mm) or a triangular base plate (65 x 52 mm) are available. Please see our "Suitable Items" below.

From €62.00 *

Details

Mon - Fri:	09 am - 06 pm
Sat:	09 am - 01 pm

Transom handle polished or chromed brass

Transom handle polished or chromed brass

Description