Mounting set for HANSE paraffin burner (6 pieces)

Accessories for TAYLOR'S paraffin heater.Additional to the parts mentioned here, all important spare parts are available from stock.We can order other parts directly from the manufacturer.Please be so free and order the detailed explosion chart or the manual as a copy.

Manual air pump for the stoves from the manufacturer Taylor's, whose tanks are equipped with a simple air pump valve. The pump is employed to generate a positive pressure in the tank, can also be used as a bicycle pump and is shipping with a mounting device made from plastic.

Flexible metal-plated pressure hose pipe for connecting pressure lines and gimbaled stoves.The gimbaled stove, when not locked in place, swings continuously, thus these hose pipefittings have high wear resistance. Note that when in harbor, etc., the stove must be locked.Length 980 mm.

3/16" copper line, connects drip unit to burner pot.Supplied with crimp sleeves (Ms olive for connection to the drip unit and Cu sleeve for burner pot connection).Over the years, the position of the solenoid valve and the drip unit has changed. On the older TAYLOR'S 079D stoves, the combination solenoid valve/drip unit was mounted about halfway up the casing; on the newer stoves, the parts are mounted at the very top of the casing, so that the pipe now has a length of about 30 cm. On the older models the pipe had a length of about 14 cm.Spare part for TAYLOR'S 079D diesel heaters.TAYLOR'S code HDT5232Handbook Code 16bAccessories for TAYLOR'S oil heater:Additional to the parts mentioned here, all important spare parts are available from stock.We can order other parts directly from the manufacturer.Please be so free and order the detailed explosion chart or the manual as a copy.

Fuel filter for all TAYLOR'S appliances, replaces the former filter CTK1185.Installation in the fuel system between tank and burner to protect the sometimes sensitive burners from contaminated fuel.Filter element made of fine metal mesh.Spare part for:TAYLOR'S 028, 029, 030, 030L Kerosene cookers and stovesTAYLOR'S 079K Kerosene heatersTAYLOR'S 079D Diesel heatersTAYLOR'S Code CTK1191Handbook Code Cookers and Stoves 13Handbook Code 079K Kerosene Heater 13Handbook Code 079D Diesel Heater 11Additional to the parts mentioned here, all important spare parts are available from stock.We can order other parts directly from the manufacturer.Please be so free and order the detailed explosion chart or the manual as a copy.

Spare parts for HANSE paraffin burner N°1: 1 x 2.07 graphite gasket 1 x 3.02 conus 2 x 3.03 gasket 1,0

Spare parts for HANSE paraffin burner N°1: 1 x 2.07 graphite gasket 1 x 3.02 conus 2 x 3.03 gasket 1,0 1 x 3.04 aluminium washer 1 x 5.01 gasket 0,5 1 x 5.02 gasket 1,5 1 x 5.05 aluminium conus high 1 x 5.08 gasket 1,0 UK

Large spare parts set HANSE paraffin burner (21 pieces)1x   2.01   outer cap1x   2.02   inner cap1x   2.03   nozzle, brass1x   2.04   needel, brass1x   2.05   spindel, brass1x   2.06   spindelring, brass1x   2.07   graphite gasket1x   2.08   spindel nut, brass1x   3.01   splint, stainless steel1x   3.02   conus standard, aluminium2x   3.03   gasket 1,01x   3.04   aluminium washe1x   3.05   glass fibre wick1x   4.01   instruction booklet 1x   5.01   gasket 0,5 mm1x   5.02   gasket 1,5 mm2x   5.03   gauze tube 4,5 mm1x   5.04   gauze nozzle1x   5.05   conus 5,5 mm

Original leather cuff for the pressure pumps on Taylor's stoves.Additional to the parts mentioned here, all important spare parts are available from stock.We can order other parts directly from the manufacturer.Please be so free and order the detailed explosion chart or the manual as a copy.

Spare parts for HANSE paraffin burner N°1: 1 x 3.01 splint 1 x 3.02 conus 2 x 3.03 gasket 1,0 1 x 3.04 aluminium washer 1 x 3.05 glass fibre wick

This all-purpose paraffin burner from the German manufacturer WEIMEISTER may be installed in the classic ovens, stoves and paraffin cookers from OPTIMUS, TAYLOR's or GENIOL - and in the HANSE stoves as well. The core burner is newly developed, manufactured and tested in Germany. Corpus and interior parts are all made from brass. Every burner is tested thoroughly before shipping. As a spare part for the paraffin cookers and stoves mentioned above, it guarantees many more years of use.It is not possible to deliver the burner to the USA or Canada.The package includes the burner and a 6-piece mounting kit consisting of:1 aluminium gasket,1 tightening cone,2 green burner gaskets (for OPTIMUS, TAYLOR, GENIOL and others),1 cotter pin for the hand valve,1 pre-heating wick,the manual and installation guide.As leaks occasionally occur due to assembly errors on the paraffin burner, we would like to take this opportunity to remind you that when working on the burner, you must always ensure that the spindle ring is fitted in the correct position.Further down this page, under ‘Download’, you will find a PDF file describing the correct assembly of the spindle ring.

Accessories for TAYLOR'S paraffin heater.Additional to the parts mentioned here, all important spare parts are available from stock.We can order other parts directly from the manufacturer.Please be so free and order the detailed explosion chart or the manual as a copy.

Accessories for TAYLOR'S cooker.Additional to the parts mentioned here, all important spare parts are available from stock.We can order other parts directly from the manufacturer.Please be so free and order the detailed explosion chart or the manual as a copy.

Accessories for TAYLOR'S paraffin heater.Additional to the parts mentioned here, all important spare parts are available from stock.We can order other parts directly from the manufacturer.Please be so free and order the detailed explosion chart or the manual as a copy.

Spare part gauze filter set für the HANSE Burner N°1 of 3 parts:2 x 5.03 gauze tube 4,51 x 5.04 gauze nozzle.The filters consist of wound brass mesh and are intended to prevent coarse-grained petroleum contamination from getting into the burner and clogging it.The long filters (5.03) are inserted in the two gasification tubes of the burner.The short filter (5.04) is inserted into the burner socket (the O-ring only serves as a transport lock and is not installed).

Spare parts for HANSE paraffin burner N°1: 2 x 3.05 glass fibre wick

Spare parts for HANSE paraffin burner N°1: 1 x 2.03 nozzle 1 x 2.04 needel 1 x 2.07 graphite gasket 1 x 3.02 conus 2 x 3.03 gasket 1,0

Spare parts for HANSE paraffin burner N°1: 1 x 2.01 inner cap 1 x 2.02 outer cap

Spare wicks which fit for the swedish POD heaters.We regret the recommended POD heater is no longer produced.

Spare parts for HANSE paraffin burner N°1: 1 x 2.03 nozzle 1 x 2.04 needel 1 x 2.05 spindel 1 x 2.06 spindelring 1 x 2.07 graphite gasket 1 x 2.08 spindel nut 1 x 3.01 splint 1 x 3.02 conus 2 x 3.03 gasket 1,0 1 x 3.04 aluminium washer 1 x 3.05 glass fibre wick 1 x 4-01 instruction booklet

Accessories for TAYLOR'S paraffin heater.Additional to the parts mentioned here, all important spare parts are available from stock.We can order other parts directly from the manufacturer.Please be so free and order the detailed explosion chart or the manual as a copy.

Tank cap to modify older tanks of TAYLOR's, where the pump mechanism is still integrated in the cap. The newer tanks have an air pump valve in the cap, so that a conventional bicycle pump can be used to build up pressure.

Transparent plastic bottle with screw-on cover and securable brass spout. This bottle can be used in various areas onboard: - As an alcohol container, it is indispensable for lighting paraffin stoves and diesel or paraffin heaters. - Excellent also as an oil can, in order to target difficult to reach places for lubrication.