Bolts & fasteners

Elbow catch made from brass, available in matte or chromed.

Push-button catch. Clean smooth works with round front plate.For door thicknesses up to 32 mm.Polished or chromed brass.

Cabinet latch with key cylinder for doors of up to 20 mm width. Operation through a push button on an oval plate with soldered-on M4 threaded sleeves, comes complete with button shield and two keys. Polished or chromed brass.Striking plate must be ordered separately.

Complete door latch with metal knob. Made up of a plastic lock box, a nicely turned knob, and a solid brass collar. Surface finish of knob and collar: Polished brass or chrome plated. Latch works through pushing the knob.When the door is closed, the knob is flush in the collar. Matches various door depths (depending on length of the knob. Comes complete with lock box and catch of white plastic.Lock box available with or without snapper. The snapper keeps the door closed even when locking mechanism is not engaged, and allows to open the door by simply pulling.Lock box also available as spare part (check "Suitable items").

Furniture/door lock for doors up to 20 mm thick. Operaion through handles on oval plates with soldered-on M4 threaded sleeves. Brass, polished or chromed finish. Can be used on the right and left. Box lock 53 x 45 x 16mm.Striking plate must be ordered separately.

Heavy ring latch. Brass body. A sturdily dimensioned stainless steel bar allows opening from inside. Polished or chromed brass. Weight: 450 g.

Brass flush spring catch, polished or chromed finish.For embedding.With striking plate.

Rolled or chromed brass design.For finger latches.D is the drill diameter.

Teak ring for finger latch.D is the drill diameter.

Double ball catches with housing from stainless steel. Balls and springs are also made from stainless steel.

Double ball catches with housing from brass or nickel plated brass.Balls and springs are made from stainless steel.

Ball catches are quick-release fasteners for doors, windows and closets. The ball holder is usually attached to the frame, the counterpart to the moving part. Brass housing. Steel balls and springs.

Cam box and striking plate, made of white plastic. The locks come with or without spring-loaded plastic snappers. The snappers hold the door closed without the need for a latch, but allow opening with a simple pull. The latch is used through the push of a knob. Dimensions of lock: 45 x 70 x 24 mm.Knob thread M6. The lock comes with a striking edge as shown.

Push-button catch. Clean smooth manufacture with oval front plate(Oval plate with sleeve screws, screw heads appear flat or slotted).For door depths up to 32 mm.Polished or chromed brass.Delivery with locking plate.

Striking plate for furniture and door locks. Polished or chromed brass design.

Patented, small roll snapper made of corrosion-free plastic for on and off doors.Due to the material selection of POM and PE, this roller catch is particularly durable and long-lasting.

Rings for finger latches, made of mahogany.D is the drill diameter.

A very beautiful noble catch for doors and drawers - made in Germany.Cast-brass grip, the oval base plate has soldered threaded sleeves on the back, so that the mounting screws are not visible from the outside.Intended for door thicknesses of 15 - 25 mm.Comes with striking plate.Polished brass, chromed or matte chromed.Convex design.

For small doors and drawers.Lockable, with 4 mm hole for a small padlock. For doors with a thickness up to 38 mm.Made from brass with polished or chromed finish.Comes with matching striking plate.

A very beautiful noble catch for doors and drawers - made in Germany.Cast-brass grip, the oval base plate has soldered threaded sleeves on the back, so that the mounting screws are not visible from the outside.Intended for door thicknesses of 15 - 25 mm.Comes with striking plate.Polished brass, chromed brass or matt chromed brass.Concave design.

Hatch fastener, pursuant to DIN 83407 Form A. Included: brass eye screw and nut, steel welded plate, stainless steel bolts, and copper cotter pin.

Light version of a lockable innox fastener, for a 6 mm lock.Polished stainless steel A4. Weight: 95 g.

Shapely, simple tension lock, made of brass with polished or chrome-plated surface.Available with straight or internal angle plate.

Lockable fitting with hole for 6 mm lock. Made from brass, surface brass rolled or chrome plated finish. Available with various mounting plates: Straight, inner or outer angled plate. Weight: 100 g.

Plain tension lock made of brass with widely spaced screw holes.Hole for padlock 7 mm.Available in polished brass or with chromed surface.Weight 115 g.

Functional brass fitting for use as hatch fastener. Width 27 mm. Rolled- or polished brass finish. Available with three different mounting plates.

Light, flat toggle fastener with hidden screw holes and a hole for a 7 mm padlock.Weight: 90 g.Polished or chromed finish.

Very heavy design with hole for 9 mm lock. Weight: 500 g.Rolled- or chromed brass finish.Available with straight or angled mounting plate.

Material: stainless steel/chromed brass. The small spring-loaded fastener is screwed into the vertical seat locker wall with a depth of max. 19mm. The included closing lip with mounting holes is mounted offset on the cover and is locked with a bolt, where a padlock can be attached.

Strong fastener equipped with a bow nut for the adjustment of its tension and a hole for a 6 mm padlock.The fastener is made from chromed brass, the plate for holding the bow nut is made from stainless steel.Weight: 168 g.

Hasp with turning eye for latching.Made from polished stainless steel plate, with strong turning eye.

Hasp and staple made from 2 mm strong rolled stainless steel sheet metal. Eyepad with a 12 mm hole for a padlock.

Ingenious convenient latch, with rubber grip of frost-resistant chloroprene and fittings of stainless steel.With removable cotter bolts.Weight: approx. 100 g.

Delicate hasp with rectangular base plate.Polished or chromed brass.

Steel pressure fork for welding, pursuant to DIN 83407, Form C.Matches hatch fasteners.

Hatch fastener, confirming to DIN 83407 Form A. Included: eye screw and nut made from stainless steel, steel welded plate, stainless steel bolts, and copper cotter pin.

Medium heavy design with hole for 6 mm lock. Weight: 200 g. Polished brass or chromed brass finish. Available with diverse mounting plates.

Heavy construction, brass polished.

Delicate hasp with round base plate.Polished or chromed brass.

Delicate version with a lightweight lock.Polished innox.Comes with two keys.

Very heavy, solid brass design, polished or chromed.Comes with sleeve.

Heavy-duty barrel bolt.Brass, chromed, or polished finish.The spring-loaded slide means that mounting in any position is possible.Sleeve or striking plate must be ordered separately.

Heavy design.Comes complete with sleeve.Made from solid stainless steel.

Heavy duty. A steel spring holds the bolt closed when not in use. Well suited as a door bolt.An elegant bolt because of its closed, rounded shape and minimal bulk.Folding handle.Available brass or chromed.

Light, inexpensive bolt.Comes complete with sleeve.Made from polished or chromed brass.

Midweight design.Comes complete with sleeve.Made from solid stainless steel.

Made from strong stainless steel A2 sheet metal for mounting in any position. Shipment including fitting sleeve.

Light, inexpensive bolt.Comes complete with sleeve.Made from polished or chromed brass.

Compact, slim design made from brass.In order to mount the barrel bolt invisibly from the front, the bolt can be disassembled.The surface is either polished brass or nickel plated.Shipping with fitting sleeve and striking plate.

Functional bolt of medium strength made from polished brass.Surface elaborately hand-polished. Slide measurements: 10 x 2,5mm. The spring-loaded slide means that mounting in any position is possible.Sleeve or striking plate must be ordered separately. .Comes with a straight bolt.

Midweight barrel bolt with offset bolt, made entirely of brass.The spring-loaded slide means that mounting in any position is possible.Comes with a matching striking plate.Polished-brass finish.

Stainless steel spring loaded slide latch for on top mounting. 

Brass design of medium weight.Elaborately hand-polished surface. Bolt dimension: 10 x 2,5 mm. Can be mounted in any position, thanks to the spring-loaded latch.Sleeve or striking plate must be ordered separately.

Very heavy, solid brass design, chromed.Matching sleeve or tab available.

Barrel Bolt sleeve.Polished or chromed brass design.

Barrel-bolt tab.Polished or chromed brass design.

Brass design of medium weight.Surface elaborately hand-polished and subsequently chromed. Bolt dimension: 10 x 2,5 mm. The spring-loaded slide means that mounting in any position is possible.Sleeve or striking plate must be ordered separately.

A tab/cabin bolt for thebrass cabin bolt. THe surface is made from polished brass.

Sleeve for cabin bolt, brass chromed

Chromed brass bolt of medium weight.Surface elaborately hand polished. Bolt dimension: 10 x 2,5 mm. The spring-loaded slide means that mounting in any position is possible.Sleeve or striking plate must be ordered separately.

Brass fastener on a plate.Polished or chromed finish, with steel axis brassed or chromed.

Surface brass or chromed finish. A spring ensures that pressure is maintained on the mounting plate, for a better hold without rattling! Comes complete with a large, polished half-moon plate (70 x 25 mm). In the original Davey catalog this fitting is called an "Anti-Rattle Fastener".

Small sash fastener with backing plate. Works left or right.Comes in rolled or nickeled brass.Weight: 54 g

Brass fastener, on a plate with a variety of threaded-sleeve heights to match various material depths.Polished, rolled or chromed finish.

Strong fastener, polished or chromed brass.Can be installed left or right.Weight: 126 g.

Universal latches for locking drawers, bulkheads, cupboard doors or letterboxes. The body is made of nickel-plated brass, the locking lug (length 40 mm) is made of stainless steel. The key can be removed in closed and open position.Supplied with 2 keys.

This cast-brass fitting has a round, split base plate and straight clasp.Looks like a rosette.Polished or chromed brass finish.

Brass fastener, on a plate.Polished, matte rolled or chromed finish.

Deep adjustable fastener fitting of brass with small knob, brass plate and stainless steel locking piece on a 60 mm threaded rod M 8. For deep installations the retaining plate is fixed with nut and locknut. Polished or chromed brass finish.

Latch plates, brass polished or chromed.

Latch plates, brass matt rolled

Button on plate made from A2 stainless steel cast.Strong, plain version, not polished.

Latch plates, brass polished, matte rolled or chromed.

Convenient latch, functions perfectly.Cast brass, matte-rolled surface.Attachment hole on top.

Turn button, brass matt rolled.

Latch plates, brass polished or chromed.

Latch plates, brass polished or chromed.

Wardrobe fastener with holes for a padlock.Rolled or nickeled brass design.Weight: 94 g.

Multiple usage latch with knurled knob (D = 22 mm) for lockers, companionway hatches, cupboard doors or letter boxes.Body made from nickel plated brass, the locking nose (L = 40 mm) is made from stainless steel.

Brass, with oval plate 52 x 22 mm, tongue length 30 mm.For wood thicknesses of 15 - 25 mm, square pin 5 mm.Available in chromed or polished brass.Please order the key separately under "Suitable Items" further down on this page.

Stainless steel door latch for heavy ship doors and hatch covers. The sleeve of stainless steel tubing is made to be welded in.TYPE A (DIN 83104 A73) Version optionally with two handles made of A4 stainless steel or A4 polished stainless steel and optionally a sleeve made of aluminium, A4 stainless steel or steel (length of sleeve 73 mm). The sleeves have an M10 x 1 grease nipple thread, the bushes are made of polyamide.A stop pin to weld to the frame is available as an accessory. TYPE B design as TYPE A, but with one handle and square spigot (19 x 19 mm). TYPE C design as TYPE A, but with one handle and flat head.All parts are available also separately.

Large aluminium sash lock for hatches. Low installation height above deck so that no lines can get caught and there is no risk of tripping.The sash lock is inserted into a 50 mm hole in the hatch cover. Below deck there is a large, smooth-running locking lever, which engages in a plastic bearing supplied with the boat by means of a rotary movement and, thanks to its special design, pulls the hatch cover downwards and thus closes it tightly.The lock can be operated from the outside with a winch handle with an internationally standardised octagon.

Steel door latch for heavy ship doors and hatch covers. The sleeve of steel tubing is made to be welded into steel bulkhead doors. TYPE A (DIN 83104 A73) standard implementation with two welded handles St 37-2 and a steel sleeve (length of the sleeve 73 mm). For doors in insulated walls there is a type with a longer sleeve (93 mm).The handles are primered with red brown zinc oxide, the sleeve is equipped with two sockets made from brass and with holes for grease nipples (thread M 10 x 1).A stop pin made from steel to weld to a steel frame is available as an accessory. There are a number of special designs available: TYPE B with handle and square-headed plugs (19 x 19 mm), TYPE C with handle and pan head. All parts are available also separately.

Strong door fastener for heavy ship doors made from A2 stainless steel.It requires a door thickness of 55-60 mm width, the axis length is not alterable (axis diameter = 15 mm).The handle length is 190 mm, length of the latch is 60 mm. It is on both sides equipped with square mounting plates of (L x W x H) 63 x 63 x 3 mm with 4 countersink holes of 6 mm.The latch has a stop, that restricts the angle of movement to 90°.

Square-ending socket spanner 19 mm made from special stainless steel.Shaft and tommy bar tempered and bronzed for hatch lock.

Accessories for DIN83104 sash fasteners:Stop pins made of steel or A4 stainless steel for welding.Dimension: 12 x 50 mm (diameter x length)Lubrication nipple made of galvanized steel (M10 x 1) or A4 stainless steel (flat nipple M10 x 1)Form A73 sleeves in various materials for DIN83104 sash fasteners.

Heavy hatch made from brass with a firm, strong handle. For bolting bulkheads and doors.With counter plate and bore for a padlock.Surface polished or chromed brass. Suitable for wood, but can also be used for steel bulkheads. Measurements:Hinge length (door depth): 55 mm.Mounting plate for the hinge diameter: 50 mm.Hinge rod diameter = 19 mm.

Very strong hatch fastener to countersink made from stainless steel (AISI 316), applicable for hatches of 6mm up to 38mm thickness.The latch can be freely adjusted, the built in compression spring with 4 mm of travel provides for tight locking and thereby prevents rattling.Included in the shipment: counter plate with 5 mm screws and 3 washers made from plastic.Article 4890-061 includes hexagon key for locking.

Very strong hatch fastener to countersink made from stainless steel (AISI 316.The latch can be freely adjusted, the built in compression spring with 4 mm of travel provides for tight locking and thereby prevents rattling.Article 4890-076 with hex key for locking.Included in the shipment: counter plate with 5 mm screws and 3 washers made from plastic.

Universal heavy lifting handle, which can also be used as a sturdy turning lock. The latch can be set to a variable angle and height.Polished A4-stainless steel.

Heavy ring latch. Brass body. A sturdily dimensioned stainless steel bar allows opening from inside. Polished or chromed brass. Weight: 450 g.

Heavy latch with folding handle, brass.Surface polished or chromed brass.Latch handle for heavy hatches.Intended for installation in wood and steel. Measurements:Hinge length (door depth): 55 mm,Hinge rod diameter: 19 mm.Mountingplate diameter: 50 mm.

Polished or chromed brass handle for opening ports.The cover snaps in place.Comes with backing plate for 4 mm threaded screws.With deep adjustable bar.

Polished or chromed brass handle for opening ports. The cover snaps in place. Comes with backing plate for 4 mm threaded screws. With deep adjustable bar, as well as a lock and two keys for locking the folding handle.

Polished or chromed brass handle for opening ports. The cover snaps in place. Comes with backing plate for 4 mm threaded screws. With a bar on a threaded shaft for smooth tightening of the lock.

Polished or chromed brass handle for opening ports. The cover snaps in place. Comes with backing plate for 4 mm threaded screws. With a bar on a threaded shaft for smooth tightening of the lock, as well as a lock and two keys for locking the folding handle.

Heavy round hatch flush ring latch. Chromed or polished brass. The spring-loaded bar can also be used from inside. Contersunk installation with backing plate (hatch depth 20 mm), invisible screws.