To be able to use the full range of Shopware 6, we recommend activating Javascript in your browser.

Jobs

Catalogue

VHF stainless whip antenna with 18 metres RG58U cable

Sonstige Hersteller

VHF stainless whip antenna with 18 metres RG58U cable

€59.90*

€59.90*

Prices incl. VAT plus shipping costs

Available, delivery time: >10 Tage (rot)

In stock

version

with 18m cable RG58U

L (cm)

100

Stk

Light high-performance, stainless steel VHF whip antenna, ideal for mast mounting on sailboats.
Gain 3 dB.
Length 100 cm, weight only 360 g.
PL socket for cord attachment.
Comes complete with 18,0m VHF cable RG58U, complete with mounting screw on antenna side and one straight PL259 plug.

📖 View article in the TOPLICHT catalogue

Art. No.	version	L (cm)	Price (unit)	Delivery time	Note list	Buy

Light high-performance, stainless steel VHF whip antenna, ideal for mast mounting on sailboats.
Gain 3 dB.
Length 100 cm, weight only 360 g.
PL socket for cord attachment.
Comes complete with 18,0m VHF cable RG58U, complete with mounting screw on antenna side and one straight PL259 plug.

Description

Light high-performance, stainless steel VHF whip antenna, ideal for mast mounting on sailboats.
Gain 3 dB.
Length 100 cm, weight only 360 g.
PL socket for cord attachment.
Comes complete with 18,0m VHF cable RG58U, complete with mounting screw on antenna side and one straight PL259 plug.

Questions about the product?

Last seen products

More articles from this category

Isolator (POM)

With this isolator backstays and shrouds can be made into effective radio antennas. The isolator must be installed in two intertwined wire eyes. The cleanly milled grooves thereby allow the wires a large bending radius, through which they are able to retain their strength.Made from the saltwater-resistant plastic Polyacetal (POM).

From €52.50 *

Insulator NORSEMAN

Insulator NORSEMAN

Isolator for installation on antenna wires or stays which are used for antennas. Lloyd Register qualified.Skilled processing means the breaking load of the appropriate wires is not reduced.Approved Norseman terminals on both sides.

€296.00 *

Koax-Kabel schwarz für UKW-Seefunkantennen

VHF antenna cable / coaxial cable

KOAX cable for VHF, D=10mm.

From €2.95 *

VHF long fiberglass antenna CX

VHF long fiberglass antenna CX

Fiberglass VHF rod antenna CX, 156-163MHz. 3 dB gain.Length overall 130 cm, antenna 120 cm, weight 0.5 kg.With chromed union nut 1"BSP and PL-socket.For mounting with a standard deck or rail fitting with 1"x14TPI threads an additional adaptor Art-Nr. 3940-102 is required (which is not supplied with the antenna).

€99.90 *

Antenna holder 1 "x14TPI Tilt joint base made of white plast

Antenna holder 1 "x14TPI Tilt joint base made of white plast

Tiltable socket for VHF or GPS antennas with standard thread 1"x14TPI. For deck or bulkhead mounting.Made from white polyamide PA plastic.

€16.95 *

VHF stainless whip antenna

VHF stainless whip antenna

Light, high-performance, stainless steel VHF whip antenna 156-163 Mhz, ideal for mast mounting on sailboats.PL socket for cord attachment.Length 1,0m, weight with bracket 0,6 kg.Comes with stainless mast bracket.Comes without antenna cable.

€49.90 *

Adapter tube for CX antenna to antenna holder 1 "x14TPI

Adapter tube for CX antenna to antenna holder 1 "x14TPI

Adapter tube made of A4 stainless steel, for mounting a CX antenna (with union nut 1" BSP) on an antenna base with thread 1" x 14TPI.Adapter threads:matching 1" BSP male thread on one side for the union nut of the CX antenna,one side female thread 1" x 14TPI, suitable for antenna bases with 1" x 14TPI male thread.The tube has a long slot on the side through which the antenna cable can be routed to the outside.

€41.90 *

Antenna bracket 1 "x14TPI stainless steel tilt joint base

Antenna bracket 1 "x14TPI stainless steel tilt joint base

Tiltable socket for VHF or GPS antennas with standard thread 1"x14TPI. For deck or bulkhead mounting.Sturdy version made from stainless steel A4.

€49.90 *

Antenna holder 1 "x14TPI stainless steel / plastic feet

Antenna holder 1 "x14TPI stainless steel / plastic feet

Different types of antenna sockets. All sockets are suitable for VHF or GPS antennas or active radar target enhancer with standard theads 1" x 14 TPI. Available versions:GLOMEX long, stainless steelstandard long, stainless steelstandard short, stainless steelstandard short, white plastic (PA)

From €9.90 *

Antenna holder 1 "x14TPI Polyamide railing clamp

Antenna holder 1 "x14TPI Polyamide railing clamp

Antenna mounts made from white polyamide (PA) for the installation of GPS and VHF antennas on horizontal rails of 22mm - 25mm. Standard antenna thread: 1" x 14 TPI.

€24.89 *

VHF stainless whip antenna with 18 metres RG58U cable

VHF stainless whip antenna with 18 metres RG58U cable

Light high-performance, stainless steel VHF whip antenna, ideal for mast mounting on sailboats.Gain 3 dB.Length 100 cm, weight only 360 g.PL socket for cord attachment.Comes complete with 18,0m VHF cable RG58U, complete with mounting screw on antenna side and one straight PL259 plug.

€59.90 *

Antenna bracket 1 "x14TPI GLOMEX V9173 Mast bracket stainles

Antenna bracket 1 "x14TPI GLOMEX V9173 Mast bracket stainles

Masthead bracket GLOMEX V9173 from stainless steel - mast mount with standard thread 1" x convolution 14 standard thread (1" x 14TPI).Can be installed on sailingboats & motorboats.Weight: 330g.

€104.90 *

Antenna bracket 1 "x14TPI stainless steel bracket for mast m

Antenna bracket 1 "x14TPI stainless steel bracket for mast m

Masthead bracket from stainless steel with arm for side mount. Male thread 1" x 14 TPI.

From €24.89 *

BANTEN wind direction indicator for VHF rod antenna

BANTEN wind direction indicator for VHF rod antenna

Practical wind indicator for the VHF antenna, suitable for all 2,5mm stainless steel rod antennae.Easy to mount, with adjustable angular arms, 380 mm pointer length.Delivery without VHF antenna.

€51.50 *

Antenna bracket 1 "x14TPI stainless steel railing clamp

Antenna bracket 1 "x14TPI stainless steel railing clamp

Rotatable antenna mounts made from stainless steel for the installation of GPS and VHF antennas on horizontal rails of 22mm - 25mm. Standard antenna thread: 1" x 14 TPI.

€24.89 *

Antenna bracket 1 "x14TPI stainless steel bracket with nut

Antenna bracket 1 "x14TPI stainless steel bracket with nut

Masthead bracket from stainless steel with flat screw nut 1" 14TPI.May be installed on sailboat or motorboat masts.

€19.90 *

Antenna bracket 1 "x14TPI Stainless steel railing tilt brack

Antenna bracket 1 "x14TPI Stainless steel railing tilt brack

Antenna mounts made from stainless steel for the installation of GPS and VHF antennas on horizontal rails of 22mm - 25mm. Standard antenna thread: 1" x 14 TPI.

€59.00 *

Antenna holder 1 "x14TPI plastic railing clamp

Antenna holder 1 "x14TPI plastic railing clamp

Rotatable antenna mounts made from white polyamide (PA) for the installation of GPS and VHF antennas on horizontal rails of 22mm - 25mm. Standard antenna thread: 1" x 14 TPI.

€19.90 *

VHF short fiberglass antenna

VHF short fiberglass antenna

Short fibre glass antenna for VHF receivers 156-163 MHz.For a fixed installation.Comes complete with 18,0 m coax cable, RG58 plug and mounting bracket from stainless steel.Length of antenna 230 mm.

€58.50 *

VHF emergency antenna

VHF emergency antenna

Fibreglass antenna with practical mounting bracket, which can be used to continue operating the radio system on superstructures or stationary equipment in an emergency (after mast breakage or similar damage), for example.Permanently mounted cable (4.5 m long) with PL plug, which can be quickly connected to any stationary radio device.Supplied with cable in practical plastic bag.Antenna length 240 mm.

€64.90 *

Request sent successfully

Request wasn't send - a error occured. Please try again.