VHF antenna cable / coaxial cable

KOAX cable for VHF, D=10mm.

from €2.95*

€2.95*

Prices incl. VAT plus shipping costs

description

koax-cable

model

RG 58 C/U

RG213 /U

version

black

D (mm)

5

10

length

in bulk

lfm

View article in the TOPLICHT catalogue

Art. No.	description	model	version	D (mm)	length	Price (metre)	Delivery time	Note list	Buy

Description

KOAX cable for VHF, D=10mm.

Questions about the product?

Talk to craftsmen, boat builders and sailors. We understand your questions and provide the right answers.

Contact experts

PL-plug and connector for KOAX-cable

PL-plugs and accessories for VHF-antennas.

From €4.95 *

Details

More Products from Category Antennas, sockets & accessories

Active antenna diplexer VHF / AIS/ AM-FM

These small diplexers allow the simultaneous use of a VHF radio, a FM/AM radio and an AIS device, using only a single antenna.Output max. 30W/channel, for frequencies 156-162 Mhz, 163 Mhz (AIS), 0,5-108 Mhz. Available are two versions: VHF / AIS / AM/FM:Active crossover switch, with output for VHF telephone, VHF/AM/FM radio, AIS receiver (only for receiving AIS informations, not for transmitting) Switch is wired for VHF telephone and AIS receiver with 50 cm of cable and matching PL plugs. Radio-out: F socket for F plug. Antenna-in: PL socket.Operating voltage: 12-24 V, current 0,04 Amps. Plastic housing. VHF / AIS transponder / AM/FM: Active crossover switch, with output for VHF, AM/FM radio, AIS transponder (receiving and transmitting of AIS informations). Completely wired for VHF and AIS with 100 cm cable and matching PL plugs.Operating voltage: 10-30 V, current 0,1 Amps. Metal housing.

From €89.90 *

Details

Adapter for mounting the CX antenna 1" BSP on 26mm pipe

Stainless steel adapter to fit a CX antenna to a standard tube with outer diam. 26mm.One side with 1" BSP outer thread for the union nut f the antenna, opposite side to a tube with outer diameter 26mm.Hex socket screws to fix the adapter to the tube.The cable may go through the fitting into the tube..

€19.90 *

Details

Adapter tube for CX antenna to antenna holder 1 "x14TPI

Adapter tube made of A4 stainless steel, for mounting a CX antenna (with union nut 1" BSP) on an antenna base with thread 1" x 14TPI.Adapter threads:matching 1" BSP male thread on one side for the union nut of the CX antenna,one side female thread 1" x 14TPI, suitable for antenna bases with 1" x 14TPI male thread.The tube has a long slot on the side through which the antenna cable can be routed to the outside.

€41.90 *

Details

Antenna bracket 1 "x14TPI GLOMEX V9173 Mast bracket stainles

Masthead bracket GLOMEX V9173 from stainless steel - mast mount with standard thread 1" x convolution 14 standard thread (1" x 14TPI).Can be installed on sailingboats & motorboats.Weight: 330g.

€104.90 *

Details

Antenna bracket 1 "x14TPI stainless steel bracket for mast m

Masthead bracket from stainless steel with arm for side mount. Male thread 1" x 14 TPI.

From €24.89 *

Details

Antenna bracket 1 "x14TPI stainless steel bracket with nut

Masthead bracket from stainless steel with flat screw nut 1" 14TPI.May be installed on sailboat or motorboat masts.

€19.90 *

Details

Antenna bracket 1 "x14TPI stainless steel railing clamp

Rotatable antenna mounts made from stainless steel for the installation of GPS and VHF antennas on horizontal rails of 22mm - 25mm. Standard antenna thread: 1" x 14 TPI.

€24.89 *

Details

Antenna bracket 1 "x14TPI Stainless steel railing tilt brack

Antenna mounts made from stainless steel for the installation of GPS and VHF antennas on horizontal rails of 22mm - 25mm. Standard antenna thread: 1" x 14 TPI.

€59.00 *

Details

Antenna bracket 1 "x14TPI stainless steel tilt joint base

Tiltable socket for VHF or GPS antennas with standard thread 1"x14TPI. For deck or bulkhead mounting.Sturdy version made from stainless steel A4.

€49.90 *

Details

Antenna holder 1 "x14TPI plastic railing clamp

Rotatable antenna mounts made from white polyamide (PA) for the installation of GPS and VHF antennas on horizontal rails of 22mm - 25mm. Standard antenna thread: 1" x 14 TPI.

€19.90 *

Details

Antenna holder 1 "x14TPI Polyamide railing clamp

Antenna mounts made from white polyamide (PA) for the installation of GPS and VHF antennas on horizontal rails of 22mm - 25mm. Standard antenna thread: 1" x 14 TPI.

€24.89 *

Details

Antenna holder 1 "x14TPI stainless steel / plastic feet

Different types of antenna sockets. All sockets are suitable for VHF or GPS antennas or active radar target enhancer with standard theads 1" x 14 TPI. Available versions:GLOMEX long, stainless steelstandard long, stainless steelstandard short, stainless steelstandard short, white plastic (PA)

From €9.90 *

Details

Antenna holder 1 "x14TPI Tilt joint base made of white plast

Tiltable socket for VHF or GPS antennas with standard thread 1"x14TPI. For deck or bulkhead mounting.Made from white polyamide PA plastic.

€16.95 *

Details

BANTEN wind direction indicator for VHF rod antenna

Practical wind indicator for the VHF antenna, suitable for all 2,5mm stainless steel rod antennae.Easy to mount, with adjustable angular arms, 380 mm pointer length.Delivery without VHF antenna.

€51.50 *

Details

Bronze earthing plate

Ground plates made from special porous material from bronze, with as large a surface as possible, are especially well suited for VHF radios.They improve the reception and range. They proved their worth with GPS units, weather decoders, weather fax receiver, as well as ham and shortwave radios.The plates are fixed with bolts to the hull and connected to the apparatus via cable.Shipping with screws and nuts from bronze.

From €69.90 *

Details

ICOM BNC antenna adapter for handheld radios AD-98FSC

The robust adapter allows you to connect an external antenna with BNC connector to an ICOM handheld radio.The external antenna (e.g. in the masthead of your sailing yacht) can be used to significantly extend the range of the handheld radio (e.g. after a failure of the built-in radio).The antenna adapter fits the ICOM handheld radios IC-M25 EURO EVO, M33, M35, M37E, M73, M91D, M93D, M94DE.

€19.90 *

Details

Insulator NORSEMAN

Isolator for installation on antenna wires or stays which are used for antennas. Lloyd Register qualified.Skilled processing means the breaking load of the appropriate wires is not reduced.Approved Norseman terminals on both sides.

€296.00 *

Details

Isolator (POM)

With this isolator backstays and shrouds can be made into effective radio antennas. The isolator must be installed in two intertwined wire eyes. The cleanly milled grooves thereby allow the wires a large bending radius, through which they are able to retain their strength.Made from the saltwater-resistant plastic Polyacetal (POM).

From €52.50 *

Details

PL-plug and connector for KOAX-cable

PL-plugs and accessories for VHF-antennas.

From €4.95 *

Details

Switch for vhf-gear

Accessories for VHF.

€49.90 *

Details

Koax-Kabel schwarz für UKW-Seefunkantennen

VHF antenna cable / coaxial cable

KOAX cable for VHF, D=10mm.

From €2.95 *

Details

VHF emergency antenna

Fibreglass antenna with practical mounting bracket, which can be used to continue operating the radio system on superstructures or stationary equipment in an emergency (after mast breakage or similar damage), for example.Permanently mounted cable (4.5 m long) with PL plug, which can be quickly connected to any stationary radio device.Supplied with cable in practical plastic bag.Antenna length 240 mm.

€64.90 *

Details

VHF long fiberglass antenna CX

Fiberglass VHF rod antenna CX, 156-163MHz. 3 dB gain.Length overall 130 cm, antenna 120 cm, weight 0.5 kg.With chromed union nut 1"BSP and PL-socket.For mounting with a standard deck or rail fitting with 1"x14TPI threads an additional adaptor Art-Nr. 3940-102 is required (which is not supplied with the antenna).

€99.90 *

Details

VHF short fiberglass antenna

Short fibre glass antenna for VHF receivers 156-163 MHz.For a fixed installation.Comes complete with 18,0 m coax cable, RG58 plug and mounting bracket from stainless steel.Length of antenna 230 mm.

€58.50 *

Details

VHF antenna cable / coaxial cable

Description

More Products from Category Antennas, sockets & accessories

Last seen products

Customer Reviews