Go to homepage
€0.00*
Jobs
Catalogue
Quick order

Antenna holder 1 "x14TPI Tilt joint base made of white plast

3940*02 Antennen - Kippgelenkfuß Kunststoff weiß 1"x14TPI

€16.95*

€16.95*

Prices incl. VAT plus shipping costs

Available, delivery time: >10 Tage (rot)

In stock

The item is in stock ready for shipping. The delivery time is approx. 1 to 3 working days.
version
material
ground plate (mm)
height (mm)
Stk
Tiltable socket for VHF or GPS antennas with standard thread 1"x14TPI.
For deck or bulkhead mounting.
Made from white polyamide PA plastic.
Show article
📖 View article in the TOPLICHT catalogue

Questions about the product?

More products from the category Antennas, sockets & accessories

Active antenna diplexer VHF / AIS/ AM-FM
Active antenna diplexer VHF / AIS/ AM-FM
These small diplexers allow the simultaneous use of a VHF radio, a FM/AM radio and an AIS device, using only a single antenna.Output max. 30W/channel, for frequencies 156-162 Mhz, 163 Mhz (AIS), 0,5-108 Mhz. Available are two versions: VHF / AIS / AM/FM:Active crossover switch, with output for VHF telephone, VHF/AM/FM radio, AIS receiver (only for receiving AIS informations, not for transmitting) Switch is wired for VHF telephone and AIS receiver with 50 cm of cable and matching PL plugs. Radio-out: F socket for F plug. Antenna-in: PL socket.Operating voltage: 12-24 V, current 0,04 Amps. Plastic housing. VHF / AIS transponder / AM/FM: Active crossover switch, with output for VHF, AM/FM radio, AIS transponder (receiving and transmitting of AIS informations). Completely wired for VHF and AIS with 100 cm cable and matching PL plugs.Operating voltage: 10-30 V, current 0,1 Amps. Metal housing.

From €89.90 *
Details
Adapter for mounting the CX antenna 1" BSP on 26mm pipe
Adapter for mounting the CX antenna 1" BSP on 26mm pipe
Stainless steel adapter to fit a CX antenna to a standard tube with outer diam. 26mm.One side with 1" BSP outer thread for the union nut f the antenna, opposite side to a tube with outer diameter 26mm.Hex socket screws to fix the adapter to the tube.The cable may go through the fitting into the tube..

€19.90 *
Details
Adapter tube for CX antenna to antenna holder 1 "x14TPI
Adapter tube for CX antenna to antenna holder 1 "x14TPI
Adapter tube made of A4 stainless steel, for mounting a CX antenna (with union nut 1" BSP) on an antenna base with thread 1" x 14TPI.Adapter threads:matching 1" BSP male thread on one side for the union nut of the CX antenna,one side female thread 1" x 14TPI, suitable for antenna bases with 1" x 14TPI male thread.The tube has a long slot on the side through which the antenna cable can be routed to the outside.

€41.90 *
Details
Antenna bracket 1 "x14TPI GLOMEX V9173 Mast bracket stainles
Antenna bracket 1 "x14TPI GLOMEX V9173 Mast bracket stainles
Masthead bracket GLOMEX V9173 from stainless steel - mast mount with standard thread 1" x convolution 14 standard thread (1" x 14TPI).Can be installed on sailingboats & motorboats.Weight: 330g.

€104.90 *
Details
Antenna bracket 1 "x14TPI stainless steel bracket for mast m
Antenna bracket 1 "x14TPI stainless steel bracket for mast m
Masthead bracket from stainless steel with arm for side mount. Male thread 1" x 14 TPI.

From €24.89 *
Details
Antenna bracket 1 "x14TPI stainless steel bracket with nut
Antenna bracket 1 "x14TPI stainless steel bracket with nut
Masthead bracket from stainless steel with flat screw nut 1" 14TPI.May be installed on sailboat or motorboat masts.

€19.90 *
Details
Antenna bracket 1 "x14TPI stainless steel railing clamp
Antenna bracket 1 "x14TPI stainless steel railing clamp
Rotatable antenna mounts made from stainless steel for the installation of GPS and VHF antennas on horizontal rails of 22mm - 25mm. Standard antenna thread: 1" x 14 TPI.

€24.89 *
Details
Antenna bracket 1 "x14TPI Stainless steel railing tilt brack
Antenna bracket 1 "x14TPI Stainless steel railing tilt brack
Antenna mounts made from stainless steel for the installation of GPS and VHF antennas on horizontal rails of 22mm - 25mm. Standard antenna thread: 1" x 14 TPI.

€59.00 *
Details
Antenna bracket 1 "x14TPI stainless steel tilt joint base
Antenna bracket 1 "x14TPI stainless steel tilt joint base
Tiltable socket for VHF or GPS antennas with standard thread 1"x14TPI. For deck or bulkhead mounting.Sturdy version made from stainless steel A4.

€49.90 *
Details
Antenna holder 1 "x14TPI plastic railing clamp
Antenna holder 1 "x14TPI plastic railing clamp
Rotatable antenna mounts made from white polyamide (PA) for the installation of GPS and VHF antennas on horizontal rails of 22mm - 25mm. Standard antenna thread: 1" x 14 TPI.

€19.90 *
Details
Antenna holder 1 "x14TPI Polyamide railing clamp
Antenna holder 1 "x14TPI Polyamide railing clamp
Antenna mounts made from white polyamide (PA) for the installation of GPS and VHF antennas on horizontal rails of 22mm - 25mm. Standard antenna thread: 1" x 14 TPI.

€24.89 *
Details
Antenna holder 1 "x14TPI stainless steel / plastic feet
Antenna holder 1 "x14TPI stainless steel / plastic feet
Different types of antenna sockets. All sockets are suitable for VHF or GPS antennas or active radar target enhancer with standard theads 1" x 14 TPI. Available versions:GLOMEX long, stainless steelstandard long, stainless steelstandard short, stainless steelstandard short, white plastic (PA)

From €9.90 *
Details
Antenna holder 1 "x14TPI Tilt joint base made of white plast
Antenna holder 1 "x14TPI Tilt joint base made of white plast
Tiltable socket for VHF or GPS antennas with standard thread 1"x14TPI. For deck or bulkhead mounting.Made from white polyamide PA plastic.

€16.95 *
Details
BANTEN wind direction indicator for VHF rod antenna
BANTEN wind direction indicator for VHF rod antenna
Practical wind indicator for the VHF antenna, suitable for all 2,5mm stainless steel rod antennae.Easy to mount, with adjustable angular arms, 380 mm pointer length.Delivery without VHF antenna.

€51.50 *
Details
Bronze earthing plate
Bronze earthing plate
Ground plates made from special porous material from bronze, with as large a surface as possible, are especially well suited for VHF radios.They improve the reception and range. They proved their worth with GPS units, weather decoders, weather fax receiver, as well as ham and shortwave radios.The plates are fixed with bolts to the hull and connected to the apparatus via cable.Shipping with screws and nuts from bronze.

From €69.90 *
Details
Insulator NORSEMAN
Insulator NORSEMAN
Isolator for installation on antenna wires or stays which are used for antennas. Lloyd Register qualified.Skilled processing means the breaking load of the appropriate wires is not reduced.Approved Norseman terminals on both sides.

€296.00 *
Details
Isolator (POM)
Isolator (POM)
With this isolator backstays and shrouds can be made into effective radio antennas. The isolator must be installed in two intertwined wire eyes. The cleanly milled grooves thereby allow the wires a large bending radius, through which they are able to retain their strength.Made from the saltwater-resistant plastic Polyacetal (POM).

From €52.50 *
Details
PL-plug and connector for KOAX-cable
PL-plug and connector for KOAX-cable
PL-plugs and accessories for VHF-antennas.

From €4.95 *
Details
Switch for vhf-gear
Switch for vhf-gear
Accessories for VHF.

€49.90 *
Details
Koax-Kabel schwarz für UKW-Seefunkantennen
VHF antenna cable / coaxial cable
KOAX cable for VHF, D=10mm.

From €2.95 *
Details
VHF emergency antenna
VHF emergency antenna
Fibreglass antenna with practical mounting bracket, which can be used to continue operating the radio system on superstructures or stationary equipment in an emergency (after mast breakage or similar damage), for example.Permanently mounted cable (4.5 m long) with PL plug, which can be quickly connected to any stationary radio device.Supplied with cable in practical plastic bag.Antenna length 240 mm.

€64.90 *
Details
VHF long fiberglass antenna CX
VHF long fiberglass antenna CX
Fiberglass VHF rod antenna CX, 156-163MHz. 3 dB gain.Length overall 130 cm, antenna 120 cm, weight 0.5 kg.With chromed union nut 1"BSP and PL-socket.For mounting with a standard deck or rail fitting with 1"x14TPI threads an additional adaptor Art-Nr. 3940-102 is required (which is not supplied with the antenna).

€99.90 *
Details
VHF short fiberglass antenna
VHF short fiberglass antenna
Short fibre glass antenna for VHF receivers 156-163 MHz.For a fixed installation.Comes complete with 18,0 m coax cable, RG58 plug and mounting bracket from stainless steel.Length of antenna 230 mm.

€58.50 *
Details
VHF stainless whip antenna
VHF stainless whip antenna
Light, high-performance, stainless steel VHF whip antenna 156-163 Mhz, ideal for mast mounting on sailboats.PL socket for cord attachment.Length 1,0m, weight with bracket 0,6 kg.Comes with stainless mast bracket.Comes without antenna cable.

€49.90 *
Details
VHF stainless whip antenna with 18 metres RG58U cable
VHF stainless whip antenna with 18 metres RG58U cable
Light high-performance, stainless steel VHF whip antenna, ideal for mast mounting on sailboats.Gain 3 dB.Length 100 cm, weight only 360 g.PL socket for cord attachment.Comes complete with 18,0m VHF cable RG58U, complete with mounting screw on antenna side and one straight PL259 plug.

€59.90 *
Details
WEATHERDOCK combination antenna GPS & AIS with mounting base
WEATHERDOCK combination antenna GPS & AIS with mounting base
The AIS & GPS combination antenna from WEATHERDOCK combines the reception of AIS and GPS/GLONASS/Galileo signals in a compact, robust design. The dust and waterproof antenna (IP67) is supplied with a screw-on mounting base (for screw, mast or adhesive mounting). Alternatively, any other mounting option with a 1" x 14TPI thread can be used (see ´Accessories´).The combination antenna is ideal for use with the easyTRX3S AIS transponder (Class B), but can of course also be connected to transceivers from other manufacturers.Technical featuresDimensions (L x W x H): 248 x 110 x 74 mmGPS connection (blue): BNCAIS connection (white): PL259Cable length 10 metres each

€231.50 *
Details

Zuletzt angesehene Artikel