Go to homepage
€0.00*
Jobs
Catalogue
Quick order
3940*03 UKW Peitschenantenne Edelstahl
Light, high-performance, stainless steel VHF whip antenna 156-163 Mhz, ideal for mast mounting on sailboats.
PL socket for cord attachment.
Length 1,0m, weight with bracket 0,6 kg.
Comes with stainless mast bracket.

Comes without antenna cable.

€49.90*

€49.90*

Prices incl. VAT plus shipping costs

version
L (cm)
pcs
View article in the TOPLICHT catalogue

Description

Light, high-performance, stainless steel VHF whip antenna 156-163 Mhz, ideal for mast mounting on sailboats.
PL socket for cord attachment.
Length 1,0m, weight with bracket 0,6 kg.
Comes with stainless mast bracket.

Comes without antenna cable.

Questions about the product?
Questions about the product?
Talk to craftsmen, boat builders and sailors. We understand your questions and provide the right answers.
Contact experts
More Products from Category Antennas, sockets & accessories
4227*02 Aktive Antennenweiche UKW / AIS / AM/FM - Bild 1
Active antenna diplexer VHF / AIS/ AM-FM
These small diplexers allow the simultaneous use of a VHF radio, a FM/AM radio and an AIS device, using only a single antenna.Output max. 30W/channel, for frequencies 156-162 Mhz, 163 Mhz (AIS), 0,5-108 Mhz. Available are two versions: VHF / AIS / AM/FM:Active crossover switch, with output for VHF telephone, VHF/AM/FM radio, AIS receiver (only for receiving AIS informations, not for transmitting) Switch is wired for VHF telephone and AIS receiver with 50 cm of cable and matching PL plugs. Radio-out: F socket for F plug. Antenna-in: PL socket.Operating voltage: 12-24 V, current 0,04 Amps. Plastic housing. VHF / AIS transponder / AM/FM: Active crossover switch, with output for VHF, AM/FM radio, AIS transponder (receiving and transmitting of AIS informations). Completely wired for VHF and AIS with 100 cm cable and matching PL plugs.Operating voltage: 10-30 V, current 0,1 Amps. Metal housing.

From €89.90 *
Details
3940-107 Adapter für CX-Antenne auf Rohr D=26mm, Edelstahl A4
Adapter for mounting the CX antenna 1" BSP on 26mm pipe
Stainless steel adapter to fit a CX antenna to a standard tube with outer diam. 26mm.One side with 1" BSP outer thread for the union nut f the antenna, opposite side to a tube with outer diameter 26mm.Hex socket screws to fix the adapter to the tube.The cable may go through the fitting into the tube..

€19.90 *
Details
3940-102 Adapterrohr für CX-Antenne auf 1"x14 TPI Antennenfuss
Adapter tube for CX antenna to antenna holder 1 "x14TPI
Adapter tube made of A4 stainless steel, for mounting a CX antenna (with union nut 1" BSP) on an antenna base with thread 1" x 14TPI.Adapter threads:matching 1" BSP male thread on one side for the union nut of the CX antenna,one side female thread 1" x 14TPI, suitable for antenna bases with 1" x 14TPI male thread.The tube has a long slot on the side through which the antenna cable can be routed to the outside.

€41.90 *
Details
3940*10 Masthalterung GLOMEX V9173 für Antennen
Antenna bracket 1 "x14TPI GLOMEX V9173 Mast bracket stainles
Masthead bracket GLOMEX V9173 from stainless steel - mast mount with standard thread 1" x convolution 14 standard thread (1" x 14TPI).Can be installed on sailingboats & motorboats.Weight: 330g.

€99.90 *
Details
3940-125 Mast-Winkelhalterung für Antennen
Antenna bracket 1 "x14TPI stainless steel bracket for mast m
Masthead bracket from stainless steel with arm for side mount. Male thread 1" x 14 TPI.

From €24.89 *
Details
3940*14 Antennenhalter 1"x14TPI Winkel mit Mutter aus Edelstahl - Bild 1
Antenna bracket 1 "x14TPI stainless steel bracket with nut
Masthead bracket from stainless steel with flat screw nut 1" 14TPI.May be installed on sailboat or motorboat masts.

€19.90 *
Details
3940*13 Reling - Klemmhalter für Antennen aus Edelstahl
Antenna bracket 1 "x14TPI stainless steel railing clamp
Rotatable antenna mounts made from stainless steel for the installation of GPS and VHF antennas on horizontal rails of 22mm - 25mm. Standard antenna thread: 1" x 14 TPI.

€24.89 *
Details
3940*15 Reling - Kipphalter für Antennen aus Edelstahl
Antenna bracket 1 "x14TPI Stainless steel railing tilt brack
Antenna mounts made from stainless steel for the installation of GPS and VHF antennas on horizontal rails of 22mm - 25mm. Standard antenna thread: 1" x 14 TPI.

€59.00 *
Details
3940*05 Antennen - Kippgelenkfuß Edelstahl 1"x14TPI
Antenna bracket 1 "x14TPI stainless steel tilt joint base
Tiltable socket for VHF or GPS antennas with standard thread 1"x14TPI. For deck or bulkhead mounting.Sturdy version made from stainless steel A4.

€49.90 *
Details
3940*16 Reling-Klemmhalter für eine GPS-Antenne
Antenna holder 1 "x14TPI plastic railing clamp
Rotatable antenna mounts made from white polyamide (PA) for the installation of GPS and VHF antennas on horizontal rails of 22mm - 25mm. Standard antenna thread: 1" x 14 TPI.

€19.90 *
Details
3940*07 Reling - Klemmhalter für Antennen aus Polyamid
Antenna holder 1 "x14TPI Polyamide railing clamp
Antenna mounts made from white polyamide (PA) for the installation of GPS and VHF antennas on horizontal rails of 22mm - 25mm. Standard antenna thread: 1" x 14 TPI.

€24.89 *
Details
Antennenfüße, Antennenhalterung
Antenna holder 1 "x14TPI stainless steel / plastic feet
Different types of antenna sockets. All sockets are suitable for VHF or GPS antennas or active radar target enhancer with standard theads 1" x 14 TPI. Available versions:GLOMEX long, stainless steelstandard long, stainless steelstandard short, stainless steelstandard short, white plastic (PA)

From €9.90 *
Details
3940-105 Antennenhalter 1"x14TPI Kippgelenkfuß aus weißem Kunststoff
Antenna holder 1 "x14TPI Tilt joint base made of white plast
Tiltable antenna base with a base plate for deck or bulkhead mounting.The mount is suitable for VHF and GPS antennas with a 1"x14TPI thread.Made of white polyamide (PA) plastic. The adjustment knob prevents lines from getting caught on the mount.

€16.95 *
Details
3940-153 Windrichtungsanzeiger BANTEN für UKW-Stabantenne
BANTEN wind direction indicator for VHF rod antenna
Practical wind indicator for the VHF antenna, suitable for all 2,5mm stainless steel rod antennae.Easy to mount, with adjustable angular arms, 380 mm pointer length.Delivery without VHF antenna.

€51.50 *
Details
3945*01 Erdungsplatte
Bronze earthing plate
Ground plates made from special porous material from bronze, with as large a surface as possible, are especially well suited for VHF radios.They improve the reception and range. They proved their worth with GPS units, weather decoders, weather fax receiver, as well as ham and shortwave radios.The plates are fixed with bolts to the hull and connected to the apparatus via cable.Shipping with screws and nuts from bronze.

From €66.50 *
Details
3940-117 GLOMEX A4-Universalhalterung für Antenne 25mm/ohne Gewinde
GLOMEX A4 Universal Mount for 25mm Antenna (Without Threads)
GLOMEX V9124 Universal Mount made of electropolished A4 stainless steel.This non-threaded mount is suitable for 25 mm (1") pipe mounts on TV antennas or Wi-Fi antennas. It has a height of 150 mm.Compatible with GLOMEX IT1205EPLUS or IT1205EPLUS/BK weBBoat® ePlus 5G / Black Wi-Fi antennaGLOMEX VT300 or VT300-BK Avior / Avior Black TV antennaGLOMEX V9125AGCU/DAB20 Talitha AGC DAB 20 TV antennaGLOMEX V9126AGC Altair AGC TV antennaGLOMEX V9112AGCU/DAB20 Nashira AGC DAB 20 TV AntennaGLOMEX V9150AGC/DAB20 Adhara AGC DAB 20 TV Antenna

€49.90 *
Details
3937-156 ICOM BNC-Antennenadapter für Handfunkgeräte AD-98FSC - Bild 1
ICOM BNC antenna adapter for handheld radios AD-98FSC
The robust adapter allows you to connect an external antenna with BNC connector to an ICOM handheld radio.The external antenna (e.g. in the masthead of your sailing yacht) can be used to significantly extend the range of the handheld radio (e.g. after a failure of the built-in radio).The antenna adapter fits the ICOM handheld radios IC-M25 EURO EVO, M33, M35, M37E, M73, M91D, M93D, M94DE.

€19.90 *
Details
1707*03 NORSEMAN Isolatoren - Bild 1
Insulator NORSEMAN
Isolator for installation on antenna wires or stays which are used for antennas. Lloyd Register qualified.Skilled processing means the breaking load of the appropriate wires is not reduced.Approved Norseman terminals on both sides.

€296.00 *
Details
1700*03 Isolator für das Achterstag - Bild 1
Isolator (POM)
With this isolator backstays and shrouds can be made into effective radio antennas. The isolator must be installed in two intertwined wire eyes. The cleanly milled grooves thereby allow the wires a large bending radius, through which they are able to retain their strength.Made from the saltwater-resistant plastic Polyacetal (POM).

From €52.50 *
Details
4226*01 PL-Stecker, Kupplung und Zubehör für KOAX-Kabel - Bild 1
PL-plug and connector for KOAX-cable
PL-plugs and accessories for VHF-antennas.

From €4.95 *
Details
4227*01 Schalter für Stromversorung UKW-Gerät
Switch for vhf-gear
Accessories for VHF.

€49.90 *
Details
UKW-Antennenkabel / Koaxialkabel
VHF antenna cable / coaxial cable
KOAX cable for VHF, D=10mm.

From €3.10 *
Details
3942-004 UKW Not-Antenne
VHF emergency antenna
Fibreglass antenna with practical mounting bracket, which can be used to continue operating the radio system on superstructures or stationary equipment in an emergency (after mast breakage or similar damage), for example.Permanently mounted cable (4.5 m long) with PL plug, which can be quickly connected to any stationary radio device.Supplied with cable in practical plastic bag.Antenna length 240 mm.

€67.50 *
Details
3940-000 UKW Antenne CX Glasfiberstab
VHF long fiberglass antenna CX
Fiberglass VHF rod antenna CX, 156-163MHz. 3 dB gain.Length overall 130 cm, antenna 120 cm, weight 0.5 kg.With chromed union nut 1"BSP and PL-socket.For mounting with a standard deck or rail fitting with 1"x14TPI threads an additional adaptor Art-Nr. 3940-102 is required (which is not supplied with the antenna).

€99.90 *
Details
Last seen products