MARCO EW3 Electronic Horn
3427-702 Schallsignalanlage MARCO EW2
3427*06 MARCO Schallsignalanlage EW3M mit Mikrofon und Verstärker
3427*06 MARCO Schallsignalanlage EW3M mit Mikrofon und Verstärker
3427*06 MARCO Schallsignalanlage EW3M mit Mikrofon und Verstärker
3427-702 Schallsignalanlage MARCO EW2 - Bedienteil SB-UV
MARCO EW3 Electronic Horn
€2,399.00*
€2,399.00*
Prices incl. VAT plus shipping costs
Available, delivery time: 1 - 0 Tage
In stock
Electronic sound signaling system with pressure chamber loudspeaker. The system has an approval for ships from 20 to 75 m as a signal system and fog horn, according to COLREG 1972, IMO Class III, approved by BSH, RINA, Lloyd's Register, MCA, BureauVeritas.
The EW3 sound signaling system consists of the waterproof (IP67) sound horn (loudspeaker) for mounting on the mast, the control box with sound generator (200 x 150 x 80 mm) and the control panel.
The sound frequency is 690 Hz, the loudness 130 dB(A) at 1 m. A signal of up to 8 tones can be programmed, with a repeat frequency of 60 or 90 seconds.
Listen to the sound here.
The integrated ultrasonic preheating of the membrane improves the sound quality under cold conditions.
Suitable for an on-board voltage of 24 volts.
Operation:
- either via the supplied control panel, which is connected via an RJ45 cable (also supplied) (length 5.0 m),
- or via a pressure switch (not included).
Electronic sound signaling system with pressure chamber loudspeaker. The system has an approval for ships from 20 to 75 m as a signal system and fog horn, according to COLREG 1972, IMO Class III, approved by BSH, RINA, Lloyd's Register, MCA, BureauVeritas.
The EW3 sound signaling system consists of the waterproof (IP67) sound horn (loudspeaker) for mounting on the mast, the control box with sound generator (200 x 150 x 80 mm) and the control panel.
The sound frequency is 690 Hz, the loudness 130 dB(A) at 1 m. A signal of up to 8 tones can be programmed, with a repeat frequency of 60 or 90 seconds.
Listen to the sound here.
The integrated ultrasonic preheating of the membrane improves the sound quality under cold conditions.
Suitable for an on-board voltage of 24 volts.
Operation:
- either via the supplied control panel, which is connected via an RJ45 cable (also supplied) (length 5.0 m),
- or via a pressure switch (not included).
Accessories