Go to homepage
€0.00*
Jobs
Catalogue
Quick order

Description

White tape made by PSP marine tapes especially to cover the horns of the spreaders.
This protects the sails from chafe.

Questions about the product?
Questions about the product?
Talk to craftsmen, boat builders and sailors. We understand your questions and provide the right answers.
Contact experts

More Products from Category Spreader & shrout protection

Baggywrinkle
Baggywrinkle
Classic chafe guard / protection sleeve for sails.Rope yarns are knotted by hand on a doubled line (tarred polypropylene) in thousand-foot-braids. Then stays, shrouds or topping lifts can be wrapped onboard.Yield:A running meter of this chafe guard yields approx. 25 cm onboard (for wires with 14 mm diameters).TOPLICHT makes this chafe guard by hand to order in our workshop.

From €23.00 *
Details
Crosstree frapper
Crosstree frapper
Practical and well designed: the crosstree frapper made from silver grey plastic is mounted to the spreader with the help of the enclosed cable ties and there is no more flapping at night!

€19.30 *
Details
Leather spreader boots
Leather spreader boots
Finished leather pieces of approx. 2.5 mm-thick, weatherproof tanned leather, for lashing or sewing.Come in pairs, includes lashing.

From €10.50 *
Details
RONDO sail protectors
RONDO sail protectors
The sail protector made from white plastic is mounted to the front railing or the shroud simply by clipping the two parts on.It protects the foresail when sailing close-hauled or the mainsail when reaching from chafing.Also the foresail goes about a lot easier when tacking.

€11.90 *
Details
SAILGUARD Sail Protectors 2 pcs.
SAILGUARD Sail Protectors 2 pcs.
An annoying problem on sailing boats is the chafing of expensive sails on the shrouds or the reeling. SAILGUARD protects the sails and makes tacking and jibing easier. SALGUARD turns with the sail and is therefore not a hindrance during any maneuver.The plastic wheel is simply attached to shrouds, stays or other thin parts of the rig and fixed in place with a clip, without the need for time-consuming removal of shrouds or stays. SALGUARD turns with the sail and is therefore not a hindrance in any maneuver.2 pieces in a set.

€11.90 *
Details
Spreader protector with Velcro fastener
Spreader protector with Velcro fastener
High quality spreader protector made from soft leather, Neoprene inside and reinforced on the sides with sewed in plastic lining.The spreader boot is held in place by a 50mm wide Velcro strip that can be cut to size on the spot.Colour grey, shipping in pairs and fits all spreader systems.

From €48.90 *
Details
Spreader tape
Spreader tape
White tape made by PSP marine tapes especially to cover the horns of the spreaders.This protects the sails from chafe.

€9.90 *
Details
Turnbuckle Boots
Turnbuckle Boots
Soft, textile shroud covers made of strong, UV-stabilized nylon fabric, which can be attached to the shrouds with Velcro fasteners even when the mast is set.The inner lining is made of robust foil canvas.Shroud protectors prevent sails from rubbing against the sharp edges of the shroud tensioners and prevent sheets from getting caught on the cotter pins.Color: blue or grey.

From €16.60 *
Details
Turnbuckle covers
Turnbuckle covers
White, soft PVC plastic. The turnbuckle protectors prevent sails or sheets from getting caught or from getting damaged by the split pins of the turnbuckles.

From €23.90 *
Details

Last seen products