Bronze backstay car WILMEX | TOPLICHT

To be able to use the full range of Shopware 6, we recommend activating Javascript in your browser.

Art. No.	for wire (mm)	for track	K (mm)	S (mm)	L (mm)	H (mm)	weight (kg)	Price (unit)	Delivery time	Note list	Buy

Description

Heavy backstay fitting with cast cover, for backstay wire.
Slide, cover and wire sheave made from polished bronze.
With integral spring-loaded push-button release.
Fits WILMEX tracks 40 x 8 mm.

Questions about the product?

Questions about the product?

Talk to craftsmen, boat builders and sailors. We understand your questions and provide the right answers.

Contact experts

Bronze 'T' track WILMEX

Bronze 'T' track WILMEX

T-profile track made from bronze.Milled from full material, shiny polished.<br<The tracks come predrilled (holes every 25mm for car stops) countersunk fixing holes for mounting.Finished pieces up to 500 mm and 1,000 mm lengths available.Matching end pieces and cars are available.

From €166.01 *

End stops for 'T' track WILMEX

End stops for 'T' track WILMEX

End pieces, exactly matching the cast WILMEX deck tracks. Also suitable for our lightweight brass deck tracks.Made from polished cast bronze.

From €36.50 *

High strength navy-DYNEEMA-rope

High strength navy-DYNEEMA-rope

Even in the commercial shipping industry, many applications have switched from wire to high modulus polyethylene (HMPE) rope (DYNEEMA, SPECTRA).This 12-strand braided tow and hauling line is made from pure DYNEEMA and protected against sun and wear with a special impregnation. At the same breaking strength, this line requires half the diameter of a similar polyamide or polyester ropes, in comparison to polypropylene rope, only 33%. Naturally, this greatly eases onboard handling. The line is also floatable.Colour: silver-grey.

From €1.34 *

Bronze deck lead with hinge

Bronze deck lead with hinge

Heavy bronze wire pulley with stainless steel axle.Polished cast body with a strong hinge.Can be used for leeboard halyards, small cranes and steering wires for example.

€566.00 *

Backstay lever HIGHFIELD DAVEY

Backstay lever HIGHFIELD DAVEY

The HIGHFIELD lever is a reliable bronze backstay turnbuckle.An absolutely classic fitting, built the same way for the past 100 years. Not only robust hand quality by the British manufacturer DAVEY & Co., but also a piece of art on any deck.The whole fitting is made by hand from bronze, sand-cast and extensively hand-polished and hand mounted.The backstay wire must be pressed or spliced onto the bronze thimble. With the clamping lever, the wire can then be brought down tight to the deck.In the tensioned position, the wire sits below the pivot of the turnbuckle. Thus the locking device is automatically secured. The optional two-piece release fitting (must be ordered separately, available for size 1) allows the (loose) backstay wire to be hooked directly to the turnbuckle.

From €320.00 *

HYE Tufnol wire rope blocks with large sheaves

HYE Tufnol wire rope blocks with large sheaves

Single-sheave design, made from Tufnol, with large sheave diameter. These blocks are maintenance-free and known for their long lives. The sheaves are finished with brass bearings, greatly reducing wear and friction. They are particularly well suited for backstay purchase systems.The high breaking loads have been tested by Germanischen Lloyd (GL). The maximum working load specified by the manufacturer is 50% of the breaking load (BRL).These blocks are particularly good for classic yachts of the 50s and 60s.

From €38.90 *

Bronze slide with eye WILMEX

Bronze slide with eye WILMEX

The WILMEX slides are made from polished bronze and designed for use with T-profile tracks of various widths. Each slide features a fixed eye for attaching blocks or line guides, a spring-loaded stopper for secure positioning, and a knurled handle for reliable grip, even in wet conditions.Available in sizes GSE‑20 through GSE‑40, these slides fit WILMEX T-tracks with widths from 20 to 40 mm (see accesories). The largest slide in the series (for 40 mm track) has a lower profile and a flattened eye.Ideal for classic rigging setups, such as genoa cars, barber haulers, or adjustable control leads on mast or boom. Installation is simple via open track ends.Technical features:Material: polished bronzeSizes: GSE-20 / GSE-25 / GSE-32 / GSE-35 / GSE-40Compatible with WILMEX T-tracks, 20–40 mm wideFixed eye for shackle or block attachment or as leadeyeSpring-loaded stopper mechanism/knurled grip handleApplication: mast, boom or deck track systems

From €220.99 *

Bronze slide stopper WILMEX

Bronze slide stopper WILMEX

The adjustable WILMEX slide stopper is made of polished bronze and features a spring-loaded push-button locking mechanism. A black rubber buffer serves as a damping element to absorb impact and protect adjacent fittings.This slide functions as a positioning and stop element for other slides or hardware on a T-track. It prevents unintentional movement and enables defined placement of eye slides, spinnaker pole cars or control blocks along the mast or deck. The buffer absorbs shocks, and the spring mechanism allows for quick, tool-free adjustment on the track.The slide stopper is designed to fit 40 × 8 mm T-tracks.Technical features· Material: bronze· Surface: polished· Spring-loaded push-button locking mechanism· Black rubber buffer for shock absorption· Fits WILMEX 40 × 8 mm T-track· Application: stopper for positioning slides on mast or deck tracks

€184.00 *

Genoa slide WILMEX

Genoa slide WILMEX

Genoa cars that fit WILMEX tracks.Polished bronze with strong bronze roller.Spring-loaded stopper with rounded grip.

From €295.00 *

WILMEX standup block

WILMEX standup block

Block made of bronze with oval base plate to screw on, matching the WILMEX slides made of bronze.The block has a bronze sheave and a stainless steel standup spring. The swivel joint is also made form stainless steel and allows the block to rotate in three directions.Suitable for a maximum sheet diameter of 14 mm.

€350.00 *

More Products from Category WILMEX track & lead

Bronze 'T' track WILMEX

Bronze 'T' track WILMEX

T-profile track made from bronze.Milled from full material, shiny polished.<br<The tracks come predrilled (holes every 25mm for car stops) countersunk fixing holes for mounting.Finished pieces up to 500 mm and 1,000 mm lengths available.Matching end pieces and cars are available.

From €166.01 *

Bronze backstay car WILMEX

Bronze backstay car WILMEX

Heavy backstay fitting with cast cover, for backstay wire.Slide, cover and wire sheave made from polished bronze.With integral spring-loaded push-button release. Fits WILMEX tracks 40 x 8 mm.

€644.00 *

Bronze slide stopper WILMEX

Bronze slide stopper WILMEX

The adjustable WILMEX slide stopper is made of polished bronze and features a spring-loaded push-button locking mechanism. A black rubber buffer serves as a damping element to absorb impact and protect adjacent fittings.This slide functions as a positioning and stop element for other slides or hardware on a T-track. It prevents unintentional movement and enables defined placement of eye slides, spinnaker pole cars or control blocks along the mast or deck. The buffer absorbs shocks, and the spring mechanism allows for quick, tool-free adjustment on the track.The slide stopper is designed to fit 40 × 8 mm T-tracks.Technical features· Material: bronze· Surface: polished· Spring-loaded push-button locking mechanism· Black rubber buffer for shock absorption· Fits WILMEX 40 × 8 mm T-track· Application: stopper for positioning slides on mast or deck tracks

€184.00 *

Bronze slide with eye WILMEX

Bronze slide with eye WILMEX

The WILMEX slides are made from polished bronze and designed for use with T-profile tracks of various widths. Each slide features a fixed eye for attaching blocks or line guides, a spring-loaded stopper for secure positioning, and a knurled handle for reliable grip, even in wet conditions.Available in sizes GSE‑20 through GSE‑40, these slides fit WILMEX T-tracks with widths from 20 to 40 mm (see accesories). The largest slide in the series (for 40 mm track) has a lower profile and a flattened eye.Ideal for classic rigging setups, such as genoa cars, barber haulers, or adjustable control leads on mast or boom. Installation is simple via open track ends.Technical features:Material: polished bronzeSizes: GSE-20 / GSE-25 / GSE-32 / GSE-35 / GSE-40Compatible with WILMEX T-tracks, 20–40 mm wideFixed eye for shackle or block attachment or as leadeyeSpring-loaded stopper mechanism/knurled grip handleApplication: mast, boom or deck track systems

From €220.99 *

Bronze spinnaker pole slide WILMEX

Bronze spinnaker pole slide WILMEX

The spinnaker pole slide from WILMEX is made of polished bronze and features a fixed transverse eye. It is designed to hold and guide the spinnaker pole or whisker pole along the mast using a T-track system. A spring-loaded stopper allows secure positioning, and the knurled handle provides a firm grip during operation. Depending on the version, the slide fits WILMEX T-tracks with widths from 20 to 40 mm (see accessories).

From €220.99 *

End stops for 'T' track WILMEX

End stops for 'T' track WILMEX

End pieces, exactly matching the cast WILMEX deck tracks. Also suitable for our lightweight brass deck tracks.Made from polished cast bronze.

From €36.50 *

Genoa slide WILMEX

Genoa slide WILMEX

Genoa cars that fit WILMEX tracks.Polished bronze with strong bronze roller.Spring-loaded stopper with rounded grip.

From €295.00 *

Genoa slide WILMEX (large version)

Genoa slide WILMEX (large version)

Strong genoa car that fits WILMEX tracks.Polished bronze, with strong roller.Integral spring-loaded stopper with push-button release.

From €537.00 *

Genoa slide with Swivel WILMEX (large version)

Genoa slide with Swivel WILMEX (large version)

Extremely strong genoa car with swiveling block, fits WILMEX tracks.Polished bronze, with strong roller. Integrated spring-loaded stopper with push-button release.

From €624.00 *

Genoa slidewith stand-up block WILMEX

Genoa slidewith stand-up block WILMEX

Bronze track slide with sheet block, for WILMEX tracks. Bronze block with strong bronze sheaves and stainless steel stand-up spring. The stainless steel swivel allows the block to turn in all three dimensions.Slide with spring-loaded stopper with round grip.

From €350.00 *

WILMEX standup block

WILMEX standup block

Block made of bronze with oval base plate to screw on, matching the WILMEX slides made of bronze.The block has a bronze sheave and a stainless steel standup spring. The swivel joint is also made form stainless steel and allows the block to rotate in three directions.Suitable for a maximum sheet diameter of 14 mm.

€350.00 *

Last seen products

Request sent successfully

Request wasn't send - a error occured. Please try again.