Slides in closed shape made of cast brass. For sewing to the leech or leech rope of the sail. Suitable for use with type B tracks/mast tracks (internal track). Enables the sail to glide smoothly in the guide track and is particularly suitable for traditional rigging systems on classic yachts. Manufacturer Davey, designation BR/SD481.The matching track has the toplight item no. 1647-1016 (1 metre) and 1647-3016 (3 metres). See under accessories.
Light slides suitable for track type B (internal track), consisting of a brass profile with a pressed-in round brass thimble that is sewn onto the leech or leech rope of the sail. The sail slides run with low friction in the internal track and are suitable for low to medium loads. Toplicht offers this item in two sizes for different track widths.Davey designation 1320/BR/S.Note: This type of slide is designed for light to medium load applications. To distribute sail load effectively, a sufficient number should always be used. For higher loads, we recommend our heavy sail slides (see similar products).
Light slides suitable for track type A (external track), consisting of a brass profile with a pressed-in round brass thimble that is sewn onto the leech or leech rope of the sail. The sail slides run with low friction on the external track and are suitable for low to medium loads. Toplicht offers this item in two sizes for different track widths (nominal sizes 16 and 19mm).Davey designation 1296/BR/S.
Internal (type B) brass tracks from DAVEY for slides.Extruded from brass, undrilled. The surface is unpolished matt.Available in three different widths (nominal sizes 16mm, 19mm, 25mm).Length either 1 or 3 metres.DAVEY designation 1321/BR/T.Matching brass and bronze slides, sliding deckleads and pole slides are available, see accessories.Hatch slides can also be combined from internal track (type B) and external track (type A) (see matching articles), in which the hatch slides safely and reliably. Mate perfectly together. As a rule, twice the length is then required for the external track at the bottom .The slide/track systems are also suitable for stylishly hanging heavy curtains and drapes.
Slides with rotating fairleads (D = 20 mm) of corrosion-resistant stainless steel for sheets up to 18 mm diameter. For 20 x 3 mm track from the SPRENGER program. Proven tracks and slides program from SPRENGER for dinghies, daysailers, and keelboats up to 7 m long. Inexpensive and well suited if weight is a prime consideration. The blocks and cars are intended for sheets up to 12 mm. The tracks have stop holes at 20 mm intervals. The cars have spring-loaded stoppers.
Slides with longitudinal bails of stainless steel for sheets up to 12 mm diameter. For 20 x 3 mm track from the SPRENGER program. Proven tracks and car program from SPRENGER for dinghies, daysailers, and keelboats up to 7 m long. Inexpensive and well suited if weight is a prime consideration. The blocks and cars are intended for sheets up to 12 mm. The tracks have stop holes at 20 mm intervals. The cars have spring-loaded stoppers.
Brass T-profile track for daysailors, cruisers, and small keelboats.matt finish, with a backing strip of grey acetal.Holes for screws and car stops.Matching bronze end pieces, polished finish are available separately.
The WILMEX slides are made from polished bronze and designed for use with T-profile tracks of various widths. Each slide features a fixed eye for attaching blocks or line guides, a spring-loaded stopper for secure positioning, and a knurled handle for reliable grip, even in wet conditions.Available in sizes GSE‑20 through GSE‑40, these slides fit WILMEX T-tracks with widths from 20 to 40 mm (see accesories). The largest slide in the series (for 40 mm track) has a lower profile and a flattened eye.Ideal for classic rigging setups, such as genoa cars, barber haulers, or adjustable control leads on mast or boom. Installation is simple via open track ends.Technical features:Material: polished bronzeSizes: GSE-20 / GSE-25 / GSE-32 / GSE-35 / GSE-40Compatible with WILMEX T-tracks, 20–40 mm wideFixed eye for shackle or block attachment or as leadeyeSpring-loaded stopper mechanism/knurled grip handleApplication: mast, boom or deck track systems
Simple slide with cleanly rounded swiveling fairlead.Matches 20 x 3 mm track, for daysailers, dinghies, and small keelboats.Cleanly worked from polished brass.With spring-loaded stopper.
Solid traditional slide with fixed eye made of cast bronze with a finely tumbled matte surface. Designed to run on mast and deck tracks with T-profile. Equipped with a spring-loaded stopper that enables secure fixation on the track.The slide is available in two sizes and fits the corresponding tracks (see related items). It is suitable for classic rigging setups – for attaching blocks, barber haulers or adjustable control points on mast or boom. Installation is carried out by simply inserting the slide into the open end of the track.Technical features· Material: bronze· Surface: finely tumbled matte finish· Cast eye· Spring-loaded stopper grip· Application: mast or deck track systems· Made in Europe
Strong slide with Tufnol pulley.Matches 25 x 4 mm track, for larger daysailers, dinghies, and small keelboats.Cleanly worked from polished bronze.With spring-loaded stopper.
Solid genoa slide made from saltwater resistant aluminum, either silver or black anodized. For 20 x 3 mm track from the SPRENGER program. The plastic sheave is equipped with a plain bearing. Proven tracks and slides program from SPRENGER for dinghies, daysailers, and keelboats up to 7 m long. Inexpensive and well suited if weight is a prime consideration. The blocks and cars are intended for sheets up to 12 mm. The tracks have stop holes at 20 mm intervals. The cars have spring-loaded stoppers.
Track slide with horizontal bail of corrosion-resistant stainless steel. For 20 x 3 mm track from the SPRENGER program. Proven tracks and car program from SPRENGER for dinghies, daysailers, and keelboats up to 7 m long. Inexpensive and well suited if weight is a prime consideration. The blocks and slides are intended for sheets up to 12 mm. The tracks have stop holes at 20 mm intervals. The cars have spring-loaded stoppers.
Endpiece made of black delrin-plastic. For 20 x 3 mm track from the SPRENGER program. Comes pairwise. Proven tracks and car program from SPRENGER for dinghies, daysailers, and keelboats up to 7 m long. Inexpensive and well suited if weight is a prime consideration. The blocks and slides are intended for sheets up to 12 mm. The tracks have stop holes at 20 mm intervals. The cars have spring-loaded stoppers.
The spinnaker pole slide from WILMEX is made of polished bronze and features a fixed transverse eye. It is designed to hold and guide the spinnaker pole or whisker pole along the mast using a T-track system. A spring-loaded stopper allows secure positioning, and the knurled handle provides a firm grip during operation. Depending on the version, the slide fits WILMEX T-tracks with widths from 20 to 40 mm (see accessories).
Davey’s spinnaker pole slide is a polished LG2 gunmetal fitting designed for 1″ internal tracks (nominal size 25mm type B). It features a lateral eye for attaching spinnaker pole or whisker pole ends or snap hooks and is locked to the track with a knurled thumb screw. A reliable component for traditional spinnaker rig setups aboard classic yachts. Can also be used for other applications, e.g. as sliding decklead.Davey labelling 3443/GM/025.
External (type A) brass tracks from DAVEY for slides.From brass, undrilled. The surface is unpolished matt.Available in two different widths (nominal sizes 16mm, 19mm).Length either 1, 2 or 3 metres.DAVEY designation 1296/BR/T.Matching brass and bronze slides, sliding deckleads and pole slides are available, see accessories.Hatch slides can also be combined from external track (type A) and internal track (type B) (see matching articles), in which the hatch slides safely and reliably. Mate perfectly together. As a rule, twice the length is then required for the external track at the bottom .The slide/track systems are also suitable for stylishly hanging heavy curtains and drapes.
The sheet horse made of high tensile marine bronze is an eye-catcher on any ship with classic, traditional look, e.g. dutch sailing barges, open cutters, dinghys or classic yachts. The classic fitting is used for traversing the main or jib sheet when tacking. Beautifully designed with deck plates and stops.The rod carries threads for bolting to the deck. To accommodate the foot block of the main or jib sheet, the sheet horse has a waist-shaped slide, whose wide design ensures controlled passing. Several application possibilities are conceivable. For example, the fitting can be used on the cockpit floor or on the aft deck as a mainsheet horse, or in front of the mast as a fore-sheet horse. Another use is mounting it at the stern above the tiller, as is common on smaller dutch sailing barges.The sheet horse can be supplied in various sizes.
Slides with plastic blocks, side parts of rust-free stainless steel for sheets up to 12 mm. For 20 x 3 mm track from the SPRENGER program. The 42 x 13 mm plastic roller is mounted with a stainless steel spring. Proven tracks and slides program from SPRENGER for dinghies, daysailers, and keelboats up to 7 m long. Inexpensive and well suited if weight is a prime consideration. The blocks and cars are intended for sheets up to 12 mm. The tracks have stop holes at 20 mm intervals. The cars have spring-loaded stoppers.
Track slide with swivel and cotter ring and of corrosion-resistant stainless steel. For 20 x 3 mm track from the SPRENGER program. Proven tracks and car program from SPRENGER for dinghies, daysailers, and keelboats up to 7 m long. Inexpensive and well suited if weight is a prime consideration. The blocks and slides are intended for sheets up to 12 mm. The tracks have stop holes at 20 mm intervals. The cars have spring-loaded stoppers.
The adjustable WILMEX slide stopper is made of polished bronze and features a spring-loaded push-button locking mechanism. A black rubber buffer serves as a damping element to absorb impact and protect adjacent fittings.This slide functions as a positioning and stop element for other slides or hardware on a T-track. It prevents unintentional movement and enables defined placement of eye slides, spinnaker pole cars or control blocks along the mast or deck. The buffer absorbs shocks, and the spring mechanism allows for quick, tool-free adjustment on the track.The slide stopper is designed to fit 40 × 8 mm T-tracks.Technical features· Material: bronze· Surface: polished· Spring-loaded push-button locking mechanism· Black rubber buffer for shock absorption· Fits WILMEX 40 × 8 mm T-track· Application: stopper for positioning slides on mast or deck tracks
Bronze track slide with sheet block, for WILMEX tracks. Bronze block with strong bronze sheaves and stainless steel stand-up spring. The stainless steel swivel allows the block to turn in all three dimensions.Slide with spring-loaded stopper with round grip.
