Skin Fitting Installation Tool

Art. No.	for	D (mm)	L (mm)	Price (unit)	Delivery time	Note list	Buy

Material: galvanised steel

Important: The inside diameter of thru-hull fittings may differ due to material thickness and manufacture. To ensure that the tool can be inserted, the inside diameter of the diffuser must be known and correspond to the outside diameter D of the installation tool specified in the table.

Suitable for these Toplicht's thru-hulls with the corresponding thread:

Thru-hulls stainless steel:
1967-013, -019, -025, -032, -038, -050
1962-013, -019, -025, -032, -038

Questions about the product?

Similar products

Installation wrench for TRUDESIGN through hull

Practical installation wrench for all sizes of TRUDESIGN through hulls. TRUDESIGN is the world leader in fittings made from composite materials. From its founding in 1974 the fittings are manufactured in New Zealand. Every TRUDESIGN part is made from high tensile composite GRP, a glass fibre reinforced Polyamide. The advantages are a high rigidity, temperature-resistance -40° to 80° C, resistant to oil and chemicals, of low weight, absolutely corrosion-resistant, electrically non-conductive and therefore especially suited for ship building materials which are galvanically sensitive like aluminium and steel. Every TRUDESIGN fitting has a tapered Whitworth pipe thread BSP (British Standard Pipe Thread) according to ISO 228-1, it is therefore fully convertible with fittings from brass, bronze or stainless steel. The shuttle valves and through hulls are approved and IMCI certificated after ISO 9093-2 (sea cocks and through hulls for pleasure vessels).

€3.00 *

Details

Skin Fitting Install Tool TRUDESIGN

The smart tool for mounting through hulls single handed.Awarded with the DAME AWARD in 2016.With this tools it is no longer necessary to hold onto the through hull from the outside. TRUDESIGN is the world leader in fittings made from composite materials. From its founding in 1974 the fittings are manufactured in New Zealand. Every TRUDESIGN part is made from high tensile composite GRP, a glass fibre reinforced Polyamide. The advantages are a high rigidity, temperature-resistance -40° to 80° C, resistant to oil and chemicals, of low weight, absolutely corrosion-resistant, electrically non-conductive and therefore especially suited for ship building materials which are galvanically sensitive like aluminium and steel.Every TRUDESIGN fitting has a tapered Whitworth pipe thread BSP (British Standard Pipe Thread) according to ISO 228-1, it is therefore fully convertible with fittings from brass, bronze or stainless steel. The shuttle valves and through hulls are approved and IMCI certificated after ISO 9093-2 (sea cocks and through hulls for pleasure vessels).

From €6.00 *

Details

Last seen products

More articles from this category

Thru-hull fitting stainless steel

Through-hull with flat abutting, polished flange. For countersinking. With ring for earth connection for earthing.Stainless steel, sea water proof, A4-steel, 1.4401 = AISI 316.Thread type: BSPThread form: parallelThe thread sizes are nominal sizes, they do not indicate the thread diameter.

From €24.50 *

Details

Thru-hull stainless steel

Curved abutting face.Polished stainless steel, sea water proof, A4, 1.4401 = AISI 316.Thread type: BSPThread form: parallelThe thread sizes are nominal sizes, they do not indicate the thread diameter.

From €14.90 *

Details

Thru-hull stainless steel extra long

Through-hull with curved, polished face, for countersinking. Supplied with ring for earth connection.Stainless steel, sea water proof, A4, 1.4401 = AISI 316.Thread type: BSPThread form: parallelThe thread sizes are nominal sizes, they do not indicate the thread diameter.

From €43.90 *

Details

Stainless thru-hull strainer

Thru-hull fitting with fixed strainer made of stainless steel.Cleanly machined fittings made of stainless steel (seawater and acid-resistant, A4, 1.4401 = AISI 316).Thread type: BSPThread form: parallelThe thread sizes are nominal sizes, they do not indicate the thread diameter.

From €26.91 *

Details

Skin Fitting Installation Tool

For installation or removal of thru-hulls that have two appropriate lugs in the passageway. The tool can be used to conveniently hold the bushings in place when tightening or loosening the locknut. The tool can also be inserted from the inside, so that a second person is not required to hold the thru-hull fitting from the outside during installation or removal.Material: galvanised steelImportant: The inside diameter of thru-hull fittings may differ due to material thickness and manufacture. To ensure that the tool can be inserted, the inside diameter of the diffuser must be known and correspond to the outside diameter D of the installation tool specified in the table.Suitable for these Toplicht's thru-hulls with the corresponding thread:Thru-hulls stainless steel: 1967-013, -019, -025, -032, -038, -0501962-013, -019, -025, -032, -038

From €10.90 *

Details

Mon - Fri:	09 am - 06 pm
Sat:	09 am - 01 pm