Go to homepage
€0.00*
Jobs
Catalogue
Quick order
6985*04 Kugelhahn TRUDESIGN elektrisch überwacht - Bild 3 6985*04 Kugelhahn TRUDESIGN elektrisch überwacht - Bild 3
6985*04 Kugelhahn TRUDESIGN elektrisch überwacht - Bild 1 6985*04 Kugelhahn TRUDESIGN elektrisch überwacht - Bild 1
6985*04 Kugelhahn TRUDESIGN elektrisch überwacht - Bild 3
6985*04 Kugelhahn TRUDESIGN elektrisch überwacht - Bild 1

Monitoring panel for checking the lever positions of up to four corresponding TRUDESIGN ball valves (see similar products). The circuit can also be used as part of a start interlock for engines or generators to ensure that they do not start without cooling water being available.

Supply voltage 12 Volt.

€139.00*

€139.00*

Prices incl. VAT plus shipping costs

voltage (V)
Stk

Description

Monitoring panel for checking the lever positions of up to four corresponding TRUDESIGN ball valves (see similar products). The circuit can also be used as part of a start interlock for engines or generators to ensure that they do not start without cooling water being available.

Supply voltage 12 Volt.

Downloads

Questions about the product?
Questions about the product?
Talk to craftsmen, boat builders and sailors. We understand your questions and provide the right answers.
Contact experts
6985*04 Kugelhahn TRUDESIGN elektrisch überwacht - Bild 1
Monitored manual ball valve TRUDESIGN
Seacock with sensors for electronic position indicator. In conjunction with the electronic display (see under accessories), the ball valve position can be conveniently monitored. The position monitoring circuit can also be used as part of a start interlock for motors or generators to ensure that they do not start without cooling water being available.

From €117.00 *
Details
More Products from Category valve, through hull and fitting made from plastic
1985*01 Kugelhahn MARELON - Bild 1
Ball valve (NPT) MARELON
MARELON ball valve, black, inner threads on both sides. Fittings of MARELON: Built in the USA of high-strength, fiberglass-strengthened special plastic. MARELON is totally resistant to galvanic corrosion and thus exceptionally well suited for aluminum and steel hulls. MARELON is also resistant to oil, diesel, waste and salt water. U.L. and A.B.Y.C. certified. Temperature range -40°C to +80°C. Note: American N.P. threads do not conform to standard BSP threads and are not compatible with them!

From €45.80 *
Details
1905*03 Polypropylen Kugelhahn
Ball valve from polypropylen
The corpus of this ball valve is manufactured in one piece; resulting in high mechanical sturdiness, strong resilience against black water and sea water and resistance to corrosion.Characteristics:full throughput,body polypropylene (PP) black,hard chromed brass ball (CW617N) with sealant shell from PTFE,handle made from red Nylon (PA),operating pressure PN16,temperature stability 0° bis 75° C.Thread type: BSPThread form: parallelThe thread sizes are nominal sizes, they do not indicate the thread diameter.

From €9.90 *
Details
6985*07 Kugelhahn TRUDESIGN kompakte Bauform
Ball valve TRUDESIGN compact design
TRUDESIGN ball valves in 1/2-inch and 3/4-inch sizes with a compact design. The compact design offers an alternative in confined spaces and for certain installation scenarios, as the corresponding sizes in TRUDESIGN’s standard ball valve series have larger overall dimensions than comparable valves made of brass or bronze, despite having the same internal diameter.Technical FeaturesCompact, space-saving designSuitable for confined installation spacesSmaller overall dimensions than the standard versionGlass-fibre-reinforced nylon compositeFor applications above and below the waterlinePTFE ball and PTFE sealing ringsCorrosion- and electrolysis-resistantElectrically non-conductiveTemperature range: -40 °C to +110 °CThread type: BSP, parallel or cylindricalUV-resistant100% leak-tested before leaving the factoryCan be used without any problems in conjunction with brass, bronze or stainless steel fittings with the appropriate thread

From €43.80 *
Details
1928*02 Zwei-Wege-Ventil JABSCO - Bild 1
Diverter valve JABSCO
This valve is lockable using a padlock. Pursuant to the HELCOM accord it is compliant with ISO 8099, which prescribes a lockable outlet for all holding tanks since. With this valve you can fulfill this requirement!Plastic, for hoses d = 38 mm.Through the included nozzle, even 25 mm hose can be attached on the inlet side. Two attachment nozzles turn, so that it can be installed in just about any mounting situation.A mounting set (valve axle lengthening) for mounting the valve on the back of a bulkhead is available as an accessory.

€109.00 *
Details
Zwei-Wege-Ventil WHALE
Diverter valve WHALE
Very sturdy plastic T-valve from the manufacturer WHALE. Intented for blackwater, waste water and bilge water systems. (Bilge pump distribution, tank switching, etc.)Possible lever positions:- left outlet open- right outlet open- both outlets closedAvailable for 25 mm or 38 mm hose connection.

From €99.00 *
Details
6985*02 Montageschlüssel für Kugelhahn von TRUDESIGN - Bild 1
Installation wrench for TRUDESIGN ball valve
Practical installation wrenches for all sizes of TRUDESIGN through ball valves. TRUDESIGN is the world leader in fittings made from composite materials. From its founding in 1974 the fittings are manufactured in New Zealand. Every TRUDESIGN part is made from high tensile composite GRP, a glass fibre reinforced Polyamide (6). The advantages are a high rigidity, temperature-resistance -40° to 80° C, resistant to oil and chemicals, of low weight, absolutely corrosion-resistant, electrically non-conductive and therefore especially suited for ship building materials which are galvanically sensitive like aluminium and steel. Every TRUDESIGN fitting has a tapered Whitworth pipe thread BSP (British Standard Pipe Thread) according to ISO 228-1, it is therefore fully convertible with fittings from brass, bronze or stainless steel. The shuttle valves and through hulls are approved and IMCI certificated after ISO 9093-2 (sea cocks and through hulls for pleasure vessels).

From €6.90 *
Details
6985*03 Lastaufnahmekragen TRUDESIGN - Bild 1
Load Bearing Collars TRUDESIGN
The load bearing collar is a linkage developed by TRUDESIGN, which is mounted inboards between the sea cock and the through hull. The collar increases the load bearing area of the valve in order to increase the toughness against the shearing forces when operating the valve. Easy fitting, there is no need for additional holes in the hull and it is applicable for all hull materials. Certified by the ABYC, awarded with the DAME AWARD in 2015. Colour: black. TRUDESIGN is the world leader in fittings made from composite materials. From its founding in 1974 the fittings are manufactured in New Zealand. Every TRUDESIGN part is made from high tensile composite GRP, a glass fibre reinforced Polyamide (6). The advantages are a high rigidity, temperature-resistance -40° to 80° C, resistant to oil and chemicals, of low weight, absolutely corrosion-resistant, electrically non-conductive and therefore especially suited for ship building materials which are galvanically sensitive like aluminium and steel. Every TRUDESIGN fitting has a tapered Whitworth pipe thread BSP (British Standard Pipe Thread) according to ISO 228-1, it is therefore fully convertible with fittings from brass, bronze or stainless steel. The shuttle valves and through hulls are approved and IMCI certificated after ISO 9093-2 (sea cocks and through hulls for pleasure vessels).

From €27.91 *
Details
6985*01 Kugelhahn TRUDESIGN
Manual ball valve TRUDESIGN
Proven TRUDESIGN ball valve made of glass-reinforced nylon composite. The valve is corrosion- and electrolysis-resistant, electrically non-conductive and suitable for hulls made of aluminium, steel, wood or GRP. Ball and sealing rings made of PTFE. Parallel BSP female threads.Note: Also available in a version with a more compact T-handle or with electronic position indicator (see Similar Products)Technical featuresGlass-reinforced nylon compositefor applications above and below the waterlinePTFE ball and PTFE sealing ringscorrosion- and electrolysis-resistantelectrically non-conductivesuitable for aluminium, steel, wood and GRP hullslockable in closed position, e.g. with a padlocktemperature range: -40 °C to +110 °Cthread: BSP (parallel)can be used without problems together with fittings made of brass, bronze or stainless steel with corresponding threadUV-resistant100% leak-tested before leaving the factorysize and thread information marked on both sides of the valvevalve position marked on the bodycertified to ISO 9093-2021 by IMCI when used with TRUDESIGN thru-hull fittingssizes 1" to 3" meet ABYC H-27 load requirementsstandard ball valves 3/4" to 3" type-approved by Bureau Veritas to ISO 9093-2021

From €52.96 *
Details
6985*04 Kugelhahn TRUDESIGN elektrisch überwacht - Bild 1
Monitored manual ball valve TRUDESIGN
Seacock with sensors for electronic position indicator. In conjunction with the electronic display (see under accessories), the ball valve position can be conveniently monitored. The position monitoring circuit can also be used as part of a start interlock for motors or generators to ensure that they do not start without cooling water being available.

From €117.00 *
Details
4605-100 Drei-Wege-Ventil RM804 für Bordtoilette
Split-up valve for marine toilet
This three-way valve RM804 is essential when using a buffer tank and allows three functions:pump waste directly to overboardpump black water into the buffer tankempty black water from the buffertank to outboards.Made from white plastic/ABS. The outlets for 38mm-hose connections are angulated and individually adjustable.Compatible with most yacht toilets currently on the market (JABSCO, RM).A special plug for the toilet bowl is included.Note: Comes without toilet pump.

€98.50 *
Details
6985*06 Kugelhahn TRUDESIGN mit T-Griff
TRUDESIGN ball valve with T-handle
The TRUDESIGN ball valve, made from glass-fibre-reinforced nylon composite, is a tried-and-tested product worldwide. This version features a T-handle, designed for installation scenarios where a large handle would be impractical or obstructive due to space constraints. The valve is corrosion- and electrolysis-resistant, electrically non-conductive and suitable for hulls made of aluminium, steel, wood or GRP. Ball and sealing rings made of PTFE. Parallel or cylindrical BSP internal threads. Technical featuresGlass fibre-reinforced nylon compositefor applications above and below the waterlinePTFE ball and PTFE sealing ringscorrosion- and electrolysis-resistantnon-conductivesuitable for aluminium, steel, wooden and GRP hullslockable in the closed position, e.g. with a padlockTemperature range: -40 °C to +110 °CThread types: BSP (parallel)Can be used without issue with brass, bronze or stainless steel fittingsUV-resistant100% leak-tested before leaving the factorySize and thread specifications marked on both sides of the valveValve position marked on the bodyAvailable with T-handle or large handleCertified to ISO 9093-2021 by IMCI, when used with TRUDESIGN through-hull fittingsSizes 1‘ to 3’ comply with ABYC H-27 load requirementsStandard ball valves 3/4‘ to 3’ type-tested by Bureau Veritas to ISO 9093-2021

From €55.80 *
Details
Last seen products