To be able to use the full range of Shopware 6, we recommend activating Javascript in your browser.

Jobs

Catalogue

Ball valve (NPT) MARELON

Ball valve (NPT) MARELON

from €45.80*

€45.80*

Prices incl. VAT plus shipping costs

Available, delivery time: >10 Tage (rot)

In stock

model

with NPT-thread

nominal size (inch)

1/2

1 1/4

L (mm)

128

78

weight (g)

430

130

Stk

MARELON ball valve, black, inner threads on both sides.

Fittings of MARELON: Built in the USA of high-strength,
fiberglass-strengthened special plastic.
MARELON is totally resistant to galvanic corrosion and thus exceptionally well
suited for aluminum and steel hulls.
MARELON is also resistant to oil, diesel, waste and salt water.
U.L. and A.B.Y.C. certified. Temperature range -40°C to +80°C.

Note: American N.P. threads do not conform to standard BSP
threads and are not compatible with them!

more information

Show 2 articles

Art. No.	model	nominal size (inch)	L (mm)	weight (g)	Price (unit)	Delivery time	Note list	Buy
1985-013	with NPT-thread	1/2	78	130	€45.80* net: €38.49	In stock Only left: 5 The item is in stock ready for shipping. The delivery time is approx. 1 to 3 working days.
1985-032	with NPT-thread	1 1/4	128	430	€65.00* net: €54.62	In stock Only left: 2 The item is in stock ready for shipping. The delivery time is approx. 1 to 3 working days.

Showing 1 to 2 of 2 products

MARELON ball valve, black, inner threads on both sides.

Fittings of MARELON: Built in the USA of high-strength,
fiberglass-strengthened special plastic.
MARELON is totally resistant to galvanic corrosion and thus exceptionally well
suited for aluminum and steel hulls.
MARELON is also resistant to oil, diesel, waste and salt water.
U.L. and A.B.Y.C. certified. Temperature range -40°C to +80°C.

Note: American N.P. threads do not conform to standard BSP
threads and are not compatible with them!

MARELON ball valve, black, inner threads on both sides.

Fittings of MARELON: Built in the USA of high-strength,
fiberglass-strengthened special plastic.
MARELON is totally resistant to galvanic corrosion and thus exceptionally well
suited for aluminum and steel hulls.
MARELON is also resistant to oil, diesel, waste and salt water.
U.L. and A.B.Y.C. certified. Temperature range -40°C to +80°C.

Note: American N.P. threads do not conform to standard BSP
threads and are not compatible with them!

Questions about the product?

More products from the category valve, through hull and fitting made from plastic

Ball valve from polypropylen

Ball valve from polypropylen

The corpus of this ball valve is manufactured in one piece; resulting in high mechanical sturdiness, strong resilience against black water and sea water and resistance to corrosion.Characteristics:full throughput,body polypropylene (PP) black,hard chromed brass ball (CW617N) with sealant shell from PTFE,handle made from red Nylon (PA),operating pressure PN16,temperature stability 0° bis 75° C.Thread type: BSPThread form: parallelThe thread sizes are nominal sizes, they do not indicate the thread diameter.

From €9.90 *

Display for monitored ball valve TRUDESIGN

Display for monitored ball valve TRUDESIGN

Monitoring panel for checking the lever positions of up to four corresponding TRUDESIGN ball valves (see similar products). The circuit can also be used as part of a start interlock for engines or generators to ensure that they do not start without cooling water being available.Supply voltage 12 Volt.

€139.00 *

Diverter valve JABSCO

Diverter valve JABSCO

This valve is lockable using a padlock. Pursuant to the HELCOM accord it is compliant with ISO 8099, which prescribes a lockable outlet for all holding tanks since. With this valve you can fulfill this requirement!Plastic, for hoses d = 38 mm.Through the included nozzle, even 25 mm hose can be attached on the inlet side. Two attachment nozzles turn, so that it can be installed in just about any mounting situation.A mounting set (valve axle lengthening) for mounting the valve on the back of a bulkhead is available as an accessory.

€119.00 *

Diverter valve WHALE

Diverter valve WHALE

Very sturdy plastic T-valve from the manufacturer WHALE. Intented for blackwater, waste water and bilge water systems. (Bilge pump distribution, tank switching, etc.)Possible lever positions:- left outlet open- right outlet open- both outlets closedAvailable for 25 mm or 38 mm hose connection.

From €119.90 *

Installation wrench for TRUDESIGN ball valve

Installation wrench for TRUDESIGN ball valve

Practical installation wrenches for all sizes of TRUDESIGN through ball valves. TRUDESIGN is the world leader in fittings made from composite materials. From its founding in 1974 the fittings are manufactured in New Zealand. Every TRUDESIGN part is made from high tensile composite GRP, a glass fibre reinforced Polyamide (6). The advantages are a high rigidity, temperature-resistance -40° to 80° C, resistant to oil and chemicals, of low weight, absolutely corrosion-resistant, electrically non-conductive and therefore especially suited for ship building materials which are galvanically sensitive like aluminium and steel. Every TRUDESIGN fitting has a tapered Whitworth pipe thread BSP (British Standard Pipe Thread) according to ISO 228-1, it is therefore fully convertible with fittings from brass, bronze or stainless steel. The shuttle valves and through hulls are approved and IMCI certificated after ISO 9093-2 (sea cocks and through hulls for pleasure vessels).

From €6.90 *

Load Bearing Collars TRUDESIGN

Load Bearing Collars TRUDESIGN

The load bearing collar is a linkage developed by TRUDESIGN, which is mounted inboards between the sea cock and the through hull. The collar increases the load bearing area of the valve in order to increase the toughness against the shearing forces when operating the valve. Easy fitting, there is no need for additional holes in the hull and it is applicable for all hull materials. Certified by the ABYC, awarded with the DAME AWARD in 2015. Colour: black. TRUDESIGN is the world leader in fittings made from composite materials. From its founding in 1974 the fittings are manufactured in New Zealand. Every TRUDESIGN part is made from high tensile composite GRP, a glass fibre reinforced Polyamide (6). The advantages are a high rigidity, temperature-resistance -40° to 80° C, resistant to oil and chemicals, of low weight, absolutely corrosion-resistant, electrically non-conductive and therefore especially suited for ship building materials which are galvanically sensitive like aluminium and steel. Every TRUDESIGN fitting has a tapered Whitworth pipe thread BSP (British Standard Pipe Thread) according to ISO 228-1, it is therefore fully convertible with fittings from brass, bronze or stainless steel. The shuttle valves and through hulls are approved and IMCI certificated after ISO 9093-2 (sea cocks and through hulls for pleasure vessels).

From €27.91 *

Manual ball valve TRUDESIGN

Manual ball valve TRUDESIGN

On both ends BSP internal thread, colour black with blue handle and a locking nose for a padlock.The ball cock is smooth-running, the ball PTFE sealed with reduced passage.Also available on request with sensors for an electronic position indicator. See under similar products.TRUDESIGN is the world leader in fittings made from composite materials. From its founding in 1974 the fittings are manufactured in New Zealand. Every TRUDESIGN part is made from high tensile composite GRP, a glass fibre reinforced Polyamide (6). The advantages are a high rigidity, temperature-resistance -40° to 80° C, resistant to oil and chemicals, of low weight, absolutely corrosion-resistant, electrically non-conductive and therefore especially suited for ship building materials which are galvanically sensitive like aluminium and steel.Every TRUDESIGN fitting has a tapered Whitworth pipe thread BSP (British Standard Pipe Thread) according to ISO 228-1, it is therefore fully convertible with fittings from brass, bronze or stainless steel. The shuttle valves and through hulls are approved and IMCI certificated after ISO 9093-2 (sea cocks and through hulls for pleasure vessels).

From €52.96 *

Monitored manual ball valve TRUDESIGN

Monitored manual ball valve TRUDESIGN

Seacock with sensors for electronic position indicator. In conjunction with the electronic display (see under accessories), the ball valve position can be conveniently monitored. The position monitoring circuit can also be used as part of a start interlock for motors or generators to ensure that they do not start without cooling water being available.

From €117.00 *

Ball valve (NPT) MARELON

Ball valve (NPT) MARELON

MARELON ball valve, black, inner threads on both sides. Fittings of MARELON: Built in the USA of high-strength, fiberglass-strengthened special plastic. MARELON is totally resistant to galvanic corrosion and thus exceptionally well suited for aluminum and steel hulls. MARELON is also resistant to oil, diesel, waste and salt water. U.L. and A.B.Y.C. certified. Temperature range -40°C to +80°C. Note: American N.P. threads do not conform to standard BSP threads and are not compatible with them!

From €45.80 *

Ball valve from polypropylen

Ball valve from polypropylen

The corpus of this ball valve is manufactured in one piece; resulting in high mechanical sturdiness, strong resilience against black water and sea water and resistance to corrosion.Characteristics:full throughput,body polypropylene (PP) black,hard chromed brass ball (CW617N) with sealant shell from PTFE,handle made from red Nylon (PA),operating pressure PN16,temperature stability 0° bis 75° C.Thread type: BSPThread form: parallelThe thread sizes are nominal sizes, they do not indicate the thread diameter.

From €9.90 *

Display for monitored ball valve TRUDESIGN

Display for monitored ball valve TRUDESIGN

Monitoring panel for checking the lever positions of up to four corresponding TRUDESIGN ball valves (see similar products). The circuit can also be used as part of a start interlock for engines or generators to ensure that they do not start without cooling water being available.Supply voltage 12 Volt.

€139.00 *

Diverter valve JABSCO

Diverter valve JABSCO

This valve is lockable using a padlock. Pursuant to the HELCOM accord it is compliant with ISO 8099, which prescribes a lockable outlet for all holding tanks since. With this valve you can fulfill this requirement!Plastic, for hoses d = 38 mm.Through the included nozzle, even 25 mm hose can be attached on the inlet side. Two attachment nozzles turn, so that it can be installed in just about any mounting situation.A mounting set (valve axle lengthening) for mounting the valve on the back of a bulkhead is available as an accessory.

€119.00 *

Diverter valve WHALE

Diverter valve WHALE

Very sturdy plastic T-valve from the manufacturer WHALE. Intented for blackwater, waste water and bilge water systems. (Bilge pump distribution, tank switching, etc.)Possible lever positions:- left outlet open- right outlet open- both outlets closedAvailable for 25 mm or 38 mm hose connection.

From €119.90 *

Installation wrench for TRUDESIGN ball valve

Installation wrench for TRUDESIGN ball valve

Practical installation wrenches for all sizes of TRUDESIGN through ball valves. TRUDESIGN is the world leader in fittings made from composite materials. From its founding in 1974 the fittings are manufactured in New Zealand. Every TRUDESIGN part is made from high tensile composite GRP, a glass fibre reinforced Polyamide (6). The advantages are a high rigidity, temperature-resistance -40° to 80° C, resistant to oil and chemicals, of low weight, absolutely corrosion-resistant, electrically non-conductive and therefore especially suited for ship building materials which are galvanically sensitive like aluminium and steel. Every TRUDESIGN fitting has a tapered Whitworth pipe thread BSP (British Standard Pipe Thread) according to ISO 228-1, it is therefore fully convertible with fittings from brass, bronze or stainless steel. The shuttle valves and through hulls are approved and IMCI certificated after ISO 9093-2 (sea cocks and through hulls for pleasure vessels).

From €6.90 *

Load Bearing Collars TRUDESIGN

Load Bearing Collars TRUDESIGN

The load bearing collar is a linkage developed by TRUDESIGN, which is mounted inboards between the sea cock and the through hull. The collar increases the load bearing area of the valve in order to increase the toughness against the shearing forces when operating the valve. Easy fitting, there is no need for additional holes in the hull and it is applicable for all hull materials. Certified by the ABYC, awarded with the DAME AWARD in 2015. Colour: black. TRUDESIGN is the world leader in fittings made from composite materials. From its founding in 1974 the fittings are manufactured in New Zealand. Every TRUDESIGN part is made from high tensile composite GRP, a glass fibre reinforced Polyamide (6). The advantages are a high rigidity, temperature-resistance -40° to 80° C, resistant to oil and chemicals, of low weight, absolutely corrosion-resistant, electrically non-conductive and therefore especially suited for ship building materials which are galvanically sensitive like aluminium and steel. Every TRUDESIGN fitting has a tapered Whitworth pipe thread BSP (British Standard Pipe Thread) according to ISO 228-1, it is therefore fully convertible with fittings from brass, bronze or stainless steel. The shuttle valves and through hulls are approved and IMCI certificated after ISO 9093-2 (sea cocks and through hulls for pleasure vessels).

From €27.91 *

Manual ball valve TRUDESIGN

Manual ball valve TRUDESIGN

On both ends BSP internal thread, colour black with blue handle and a locking nose for a padlock.The ball cock is smooth-running, the ball PTFE sealed with reduced passage.Also available on request with sensors for an electronic position indicator. See under similar products.TRUDESIGN is the world leader in fittings made from composite materials. From its founding in 1974 the fittings are manufactured in New Zealand. Every TRUDESIGN part is made from high tensile composite GRP, a glass fibre reinforced Polyamide (6). The advantages are a high rigidity, temperature-resistance -40° to 80° C, resistant to oil and chemicals, of low weight, absolutely corrosion-resistant, electrically non-conductive and therefore especially suited for ship building materials which are galvanically sensitive like aluminium and steel.Every TRUDESIGN fitting has a tapered Whitworth pipe thread BSP (British Standard Pipe Thread) according to ISO 228-1, it is therefore fully convertible with fittings from brass, bronze or stainless steel. The shuttle valves and through hulls are approved and IMCI certificated after ISO 9093-2 (sea cocks and through hulls for pleasure vessels).

From €52.96 *

Monitored manual ball valve TRUDESIGN

Monitored manual ball valve TRUDESIGN

Seacock with sensors for electronic position indicator. In conjunction with the electronic display (see under accessories), the ball valve position can be conveniently monitored. The position monitoring circuit can also be used as part of a start interlock for motors or generators to ensure that they do not start without cooling water being available.

From €117.00 *

Ball valve (NPT) MARELON

Ball valve (NPT) MARELON

MARELON ball valve, black, inner threads on both sides. Fittings of MARELON: Built in the USA of high-strength, fiberglass-strengthened special plastic. MARELON is totally resistant to galvanic corrosion and thus exceptionally well suited for aluminum and steel hulls. MARELON is also resistant to oil, diesel, waste and salt water. U.L. and A.B.Y.C. certified. Temperature range -40°C to +80°C. Note: American N.P. threads do not conform to standard BSP threads and are not compatible with them!

From €45.80 *

Ball valve from polypropylen

Ball valve from polypropylen

The corpus of this ball valve is manufactured in one piece; resulting in high mechanical sturdiness, strong resilience against black water and sea water and resistance to corrosion.Characteristics:full throughput,body polypropylene (PP) black,hard chromed brass ball (CW617N) with sealant shell from PTFE,handle made from red Nylon (PA),operating pressure PN16,temperature stability 0° bis 75° C.Thread type: BSPThread form: parallelThe thread sizes are nominal sizes, they do not indicate the thread diameter.

From €9.90 *

Display for monitored ball valve TRUDESIGN

Display for monitored ball valve TRUDESIGN

Monitoring panel for checking the lever positions of up to four corresponding TRUDESIGN ball valves (see similar products). The circuit can also be used as part of a start interlock for engines or generators to ensure that they do not start without cooling water being available.Supply voltage 12 Volt.

€139.00 *

Diverter valve JABSCO

Diverter valve JABSCO

This valve is lockable using a padlock. Pursuant to the HELCOM accord it is compliant with ISO 8099, which prescribes a lockable outlet for all holding tanks since. With this valve you can fulfill this requirement!Plastic, for hoses d = 38 mm.Through the included nozzle, even 25 mm hose can be attached on the inlet side. Two attachment nozzles turn, so that it can be installed in just about any mounting situation.A mounting set (valve axle lengthening) for mounting the valve on the back of a bulkhead is available as an accessory.

€119.00 *

Diverter valve WHALE

Diverter valve WHALE

Very sturdy plastic T-valve from the manufacturer WHALE. Intented for blackwater, waste water and bilge water systems. (Bilge pump distribution, tank switching, etc.)Possible lever positions:- left outlet open- right outlet open- both outlets closedAvailable for 25 mm or 38 mm hose connection.

From €119.90 *

Installation wrench for TRUDESIGN ball valve

Installation wrench for TRUDESIGN ball valve

Practical installation wrenches for all sizes of TRUDESIGN through ball valves. TRUDESIGN is the world leader in fittings made from composite materials. From its founding in 1974 the fittings are manufactured in New Zealand. Every TRUDESIGN part is made from high tensile composite GRP, a glass fibre reinforced Polyamide (6). The advantages are a high rigidity, temperature-resistance -40° to 80° C, resistant to oil and chemicals, of low weight, absolutely corrosion-resistant, electrically non-conductive and therefore especially suited for ship building materials which are galvanically sensitive like aluminium and steel. Every TRUDESIGN fitting has a tapered Whitworth pipe thread BSP (British Standard Pipe Thread) according to ISO 228-1, it is therefore fully convertible with fittings from brass, bronze or stainless steel. The shuttle valves and through hulls are approved and IMCI certificated after ISO 9093-2 (sea cocks and through hulls for pleasure vessels).

From €6.90 *

Load Bearing Collars TRUDESIGN

Load Bearing Collars TRUDESIGN

The load bearing collar is a linkage developed by TRUDESIGN, which is mounted inboards between the sea cock and the through hull. The collar increases the load bearing area of the valve in order to increase the toughness against the shearing forces when operating the valve. Easy fitting, there is no need for additional holes in the hull and it is applicable for all hull materials. Certified by the ABYC, awarded with the DAME AWARD in 2015. Colour: black. TRUDESIGN is the world leader in fittings made from composite materials. From its founding in 1974 the fittings are manufactured in New Zealand. Every TRUDESIGN part is made from high tensile composite GRP, a glass fibre reinforced Polyamide (6). The advantages are a high rigidity, temperature-resistance -40° to 80° C, resistant to oil and chemicals, of low weight, absolutely corrosion-resistant, electrically non-conductive and therefore especially suited for ship building materials which are galvanically sensitive like aluminium and steel. Every TRUDESIGN fitting has a tapered Whitworth pipe thread BSP (British Standard Pipe Thread) according to ISO 228-1, it is therefore fully convertible with fittings from brass, bronze or stainless steel. The shuttle valves and through hulls are approved and IMCI certificated after ISO 9093-2 (sea cocks and through hulls for pleasure vessels).

From €27.91 *

Manual ball valve TRUDESIGN

Manual ball valve TRUDESIGN

On both ends BSP internal thread, colour black with blue handle and a locking nose for a padlock.The ball cock is smooth-running, the ball PTFE sealed with reduced passage.Also available on request with sensors for an electronic position indicator. See under similar products.TRUDESIGN is the world leader in fittings made from composite materials. From its founding in 1974 the fittings are manufactured in New Zealand. Every TRUDESIGN part is made from high tensile composite GRP, a glass fibre reinforced Polyamide (6). The advantages are a high rigidity, temperature-resistance -40° to 80° C, resistant to oil and chemicals, of low weight, absolutely corrosion-resistant, electrically non-conductive and therefore especially suited for ship building materials which are galvanically sensitive like aluminium and steel.Every TRUDESIGN fitting has a tapered Whitworth pipe thread BSP (British Standard Pipe Thread) according to ISO 228-1, it is therefore fully convertible with fittings from brass, bronze or stainless steel. The shuttle valves and through hulls are approved and IMCI certificated after ISO 9093-2 (sea cocks and through hulls for pleasure vessels).

From €52.96 *

Request sent successfully

Request wasn't send - a error occured. Please try again.