4631*01 WHALE Abwassersammeltank - Bild 1
4631*01 WHALE Abwassersammeltank - Bild 3
4631*01 WHALE Abwassersammeltank - Bild 5
4631*01 WHALE Abwassersammeltank - Bild 6
4631*01 WHALE Abwassersammeltank - Bild 7
Waste water collection tank 8l with sensor WHALE GT0810B
PE collection tank with multiple connections for graywater from showers, sinks, and air conditioning units. All of a boat’s service water is collected in this tank, which is mounted deep within the hull, and from there is pumped directly through a through-hull fitting to the outside or into a holding tank.
The Intelligent Control Sensor, which controls the automatic operation of the wastewater pump, is waterproof and integrated into the one-piece molded inspection cover. This tank cover-sensor unit, with a fully encapsulated circuit board, contains no moving parts that are prone to clogging and allows for easy maintenance and cleaning. To ensure optimal performance, the sensor surfaces must be cleaned of dirt and residue regularly, at least every 3 months (do not use abrasive cleaners).
The sensor is mounted at an optimal height relative to the outlet opening, thereby preventing the typical suction noise.
There are screw mounts on the tank walls for attaching a 12/24-volt WHALE GULPER diaphragm pump.
Each tank has 8 inlet ports (8-liter tank: 2x19 / 3x25 / 3x38 mm; 16-liter tank: 4x25 / 4x38 mm) and 2 outlet ports (8-liter tank: 1x19 / 1x25 mm, 16-liter tank: 2x25 mm). When installing the tank, simply drill out the ports intended for hose connection.
Pump not included.
from €249.00*
€249.00*
Prices incl. VAT plus shipping costs
Description
PE collection tank with multiple connections for graywater from showers, sinks, and air conditioning units. All of a boat’s service water is collected in this tank, which is mounted deep within the hull, and from there is pumped directly through a through-hull fitting to the outside or into a holding tank.
The Intelligent Control Sensor, which controls the automatic operation of the wastewater pump, is waterproof and integrated into the one-piece molded inspection cover. This tank cover-sensor unit, with a fully encapsulated circuit board, contains no moving parts that are prone to clogging and allows for easy maintenance and cleaning. To ensure optimal performance, the sensor surfaces must be cleaned of dirt and residue regularly, at least every 3 months (do not use abrasive cleaners).
The sensor is mounted at an optimal height relative to the outlet opening, thereby preventing the typical suction noise.
There are screw mounts on the tank walls for attaching a 12/24-volt WHALE GULPER diaphragm pump.
Each tank has 8 inlet ports (8-liter tank: 2x19 / 3x25 / 3x38 mm; 16-liter tank: 4x25 / 4x38 mm) and 2 outlet ports (8-liter tank: 1x19 / 1x25 mm, 16-liter tank: 2x25 mm). When installing the tank, simply drill out the ports intended for hose connection.
Pump not included.
Downloads
