JOHNSON shower sump

Fresh and waste water tank

Sturdy tanks made of thick-walled PE plastic (polyethylene), which prevents unpleasant odors from penetrating. Suitable for faeces and waste water. Dark blue color.Rectangular shape Tank top with screw-on inspection cover (opening diameter of 105mm) and a 3/8" internal thread for connecting the tank ventilationNumerous blind spigots with internal thread that can be used individually depending on the installation situation and are intended for connecting the filling and drain lines: - 4 blind spigots 1½" internal thread, 2 on each end face - 4 blind spigots ¾" internal thread, 2 on each end faceThe selected spigot can be easily drilled out for connection.

From €89.00 *

Details

Fresh and waste water tank slanted

Sturdy tanks made of thick-walled PE plastic (polyethylene), which prevents unpleasant odors from penetrating. Suitable for faeces and waste water. Dark blue color.Beveled rectangular shape - well suited for space-saving installation, e.g. close to the manholeTank top with screw-on inspection cover (opening diameter of 105mm) and a 3/8" internal thread for connecting the tank ventilationNumerous blind ports with internal threads that can be used individually depending on the installation situation and are intended for connecting the filling and drain lines: - 4 blind ports 1½" internal thread, 2 on each end face - 4 blind ports ¾" internal thread, 2 on each end faceThe selected dummy connections can be easily drilled out for connection.

From €129.00 *

Details

Holding tank

This buffer tank, made of polyethylene, is easily mounted directly in front of the onboard WC.Due to its compact construction, it can be installed in just about every boat.The tank works with almost all standard onboard toilets (PAR-BRYDON, RM 69 etc.).The tank has two 1 1/2" threads: one for waste water (38 mm) and two (1/2" and 3/4") for ventilation.The tank can be easily retrofitted and needs no disinfection chemicals.Dimensions: (W x D x H) 500 x 400 x 250 mm; Contents 28 litres.

€109.90 *

Details

JOHNSON shower sump

Plastic holding tank with integrated 12 volt automatic pump.Holds 6 litres,3 intakes,usable for 19mm to 38mm hose.

€179.00 *

Details

RULE shower sump

Small plastic tank for collecting waste water from showers or sinks, as part of a waste-water lifting system with floating switch and RULE 500 submersible pump for automatic emptying.The tank holds approx. 7l of waste water, thus it's only intended for small sinks with moderate inflow.Transparent cover for visual inspection, screws off for cleaning .Data:Intake: 38 mmOutlet: 19 mmCurrent: 2.5 A at 12 voltsDimensions: 210 x 240 x 140 mm.

€249.00 *

Details

WHALE gray water tank

PE multi-port grey waste tanks for collecting wastewater from showers, washbasins or air conditioning units in a single tank. The tank is mounted deep in the hull and is emptied directly outboard or into a holding tank.The Intelligent Control Sensor ensures automatic operation of the wastewater pump. It is integrated watertight into the one-piece moulded inspection lid. The tank lid sensor unit with fully potted circuit board contains no moving parts prone to clogging and allows easy maintenance and cleaning. Outlet port and sensor locations minimize air pumping noise.On the tank walls there are screw mounts for screwing on 12/24 Volt WHALE GULPER diaphragm pumps.The tanks each have 8 inlet ports (8 liter-tank: 2x19 / 3x25 / 3x38 mm, 16 liter-tank: 4x25 / 4x38 mm) and 2 outlet ports (8 liter-tank: 1x19 / 1x25 mm, 16 liter-tank: 2x25 mm). When installing the tank, simply drill out the locator ports intended for use.The tank comes without pump.

From €249.00 *

Details

Mon - Fri:	09 am - 06 pm
Sat:	09 am - 01 pm