Go to homepage
€0.00*
Jobs
Catalogue
Quick order

Description

Spares for FYNSPRAY galley pumps AUCKLAND or DUNEDIN.

Questions about the product?
Questions about the product?
Talk to craftsmen, boat builders and sailors. We understand your questions and provide the right answers.
Contact experts
FYNSPRAY Galley pump AUCKLAND
FYNSPRAY Galley pump AUCKLAND
A beautiful and practical heavy brass hand pump for the galley. Above-table model with vertical pump and swiveling spout. Polished or chromed finishes available. Also intended for salt water.Hose attachment 13-16 mm.Output approx. 0.07 l/stroke.Height inserted: 115 mm.Height extended: 215 mm.An aesthetic embellishment, exclusive by TOPLICHT - not just for the pantry on traditional ships.Spare parts kit is Article-No. 4644-104. 

From €199.00 *
Details

More Products from Category Spare parts & accessories for pumps

Accessories for Bilge pump WHALE GUSHER TITAN
Accessories for Bilge pump WHALE GUSHER TITAN
We deliver a lot of spare parts for the WHALE GUSHER TITAN bilge pump.

From €61.50 *
Details
Accessories for WHALE GUSHER 30
Accessories for WHALE GUSHER 30
We deliver a lot of spare parts for the WHALE GUSHER 30 bilge pump.

From €98.50 *
Details
Accessories for WHALE GUSHER URCHIN
Accessories for WHALE GUSHER URCHIN
We deliver a lot of spareparts for the WHALE GUSHER URCHIN bilge pump.

From €39.90 *
Details
Belowdeck conversion set for WHALE GUSHER 30
Belowdeck conversion set for WHALE GUSHER 30
Deckplate and bridge for WHALE-pump Gusher 30, for deck or bulkhead mounting. Provides a neat cover over manual bilgepumps. Manufactured from aluminium cast. Snap-shut lid remains closed when pump is not in use.

€149.00 *
Details
Bilge water filter (oil strainer) WAVESTREAM
Bilge water filter (oil strainer) WAVESTREAM
The MARPOL Convention prohibits the discharge of oily wastewater into the sea. This filter removes the oily substances from the pumped bilge water by a patented filter system, so that the bilge water can be pumped out almost without oil residues and the water pollution is minimized.The filter is installed behind the bilge pump and in front of the ship's passage. It is suitable for oil residues, large dirt must be removed from the bilge before.Supplied with a stainless steel wall mounting plate.Replacement filter cartridges are available, annual replacement is recommended.LLOYD'S REGISTER Type Approved.

From €179.00 *
Details
Clamping piece for hand bilge pump
Clamping piece for hand bilge pump
Holding brackets, fit our brass hand bilge pump.Stainless steel.

€29.00 *
Details
Deck-/bulkhead plate for HENDERSON / WHALE MK5
Deck-/bulkhead plate for HENDERSON / WHALE MK5
Deckplate for HENDERSON/WHALE pump MK5 for deck or bulkhead mounting. Provides a neat cover over manual bilgepumps. Manufactured from UV stabilised plasic, will not fade or discolor. Snap-shut lid remains closed when pump is not in use.

€79.00 *
Details
Deck/-bulkheadplate for WHALE MK5-Pump
Deck/-bulkheadplate for WHALE MK5-Pump
Deckring without lid for WHALE-pump MK5 (BP0535) for deck- or bulkhead mounting.Manufactured from white, UV-stabilised plastic.

€82.00 *
Details
Deck/bulkhead plate for WHALE-pumps
Deck/bulkhead plate for WHALE-pumps
Deckplate for WHALEpumps for deck or bulkhead mounting. Provides a neat cover over manual bilgepumps. Manufactured from UV stabilised plasic, will not fade or discolor. Snap-shut lid remains closed when pump is not in use.Article-no. 1860-110 (DP8904) fits for Gusher 10, Urchin, Titan.

€49.90 *
Details
Deck/bulkhead plate for WHALE-pumps cast aluminium
Deck/bulkhead plate for WHALE-pumps cast aluminium
Deckplate for WHALE-pumps for deck or bulkhead mounting. Provides a neat cover over manual bilgepumps. Manufactured from aluminium cast. Snap-shut lid remains closed when pump is not in use. 1860-111 (DP3804) fits for Gusher 10 and 30 or Gusher Urchin.

€119.00 *
Details
Filter cartridge for WAVESTREAM bilgewater filters
Filter cartridge for WAVESTREAM bilgewater filters
Accessory for bilge water filter WAVESTREAM.

From €39.90 *
Details
Gaiter-Kit for WHALE/HENDERSON deckplates
Gaiter-Kit for WHALE/HENDERSON deckplates
Service kit for WHALE/HENDERSON deckplates suitable for underdeck models Gusher 30 and 10, Titan, Urchin, Mk5The kit includes a gaiter (diameter 108mm) and an O-ring.

€36.90 *
Details
Grease for impellers JABSCO
Grease for impellers JABSCO
Accessory for JABSCO impellers: JABSCO impeller grease, 2,5 ml tube.

€3.90 *
Details
Impeller
Impeller
The Italian FINNORD group produces impellers in OEM quality for different manufacturers of pumps and offers a wide assortment of replacement impellers under the name CEF at reasonable prices.Here we present a selection of popular impellers made from neoprene and nitrile rubber.Usualy shipping complete with matching paper cover gaskets. To see the matching image for the impeller, simply click on the part number in the table below.Other sizes are available.

From €18.90 *
Details
Impeller for impellerpump MARCO UP1
Impeller for impellerpump MARCO UP1
Impeller of special nitril rubber. Original spare part for UP1, UP1-M and UP1/AC MARCO Pumps.Dimensions hight x Ø: 22 x 51.5 mm.Bore Ø: 8 mm.

€32.90 *
Details
Impeller for impellerpump MARCO UP1-J
Impeller for impellerpump MARCO UP1-J
Impeller IMP2 of special nitril rubber. Original spare part for UP1-J and UP1-JR MARCO pumps.Dimensions hight x Ø: 22 x 40.5 mm.Bore Ø: 8 mm.

€32.90 *
Details
Impeller-kit JABSCO 6303-0003K
Impeller-kit JABSCO 6303-0003K
Spare impeller for JABSCO pumps.

From €34.90 *
Details
JABSCO Impeller
JABSCO Impeller
Original JABSCO impeller for installation on most cooling water bilge pumps and universal pumps.To keep motors and pumps running smoothly, choosing the right impeller is critical. In addition to the hub mount and size, the material of the impeller should match its application:Neoprene is the most commonly used material for impellers and is suitable wherever only small amounts of oil or diesel fuel are present. Neoprene impellers are therefore suitable for engine cooling and for salt or fresh water pumping.Nitrile is oil resistant and can also be used for heavily polluted water. Impellers made of nitrile are therefore suitable for bilge and bilge pumps.The impellers are usually supplied with a matching paper cover gasket.Other JABSCO impellers and spare parts are also available at short notice on request.To see the matching image for the impeller, simply click on the part number in the table below.

From €37.00 *
Details
Outlet elbows for diaphragm pump PLASTIMO 11722
Outlet elbows for diaphragm pump PLASTIMO 11722
Outlet elbows for the diaphragm pump PLASTIMO model 11722.They are screwed and fitted with an O-ring for perfect water tightness and added safety (quick release facility). For a tube diameter of 38mm.

€17.90 *
Details
Repair kit for RHEINSTROM diaphragm pump M50 & M50E
Repair kit for RHEINSTROM diaphragm pump M50 & M50E
Repair kit #0350095 for the RHEINSTROM diaphragm pump M50 and M50E.The set consists of the pump membrane, a large seal and three valve flaps made from plastic.

€115.00 *
Details
Service kit for galley pump WELLINGTON
Service kit for galley pump WELLINGTON
Spares for FYNSPRAY galley pump WELLINGTON.Please check if your older pump has got a piston seal of leather or a newer pump one of rubber!

From €19.00 *
Details
Service kit for hand bilge pump (before 2012)
Service kit for hand bilge pump (before 2012)
Accessories for brass hand bilge pump, manufactured before 2012.

€19.90 *
Details
Service kit for hand bilge pump (from 2012)
Service kit for hand bilge pump (from 2012)
Accessories for brass hand bilge pump.

€17.90 *
Details
Service kit for oil drain pump
Service kit for oil drain pump
Accessories for oil drain pump.

€16.51 *
Details

Last seen products