Go to homepage
€0.00*
Jobs
Catalogue
Quick order

Bilge pump PLASTIMO with bypass

1769*02 Membranpumpe mit Bypass PLASTIMO
1769*02 Membranpumpe mit Bypass PLASTIMO
1769-039 Ersatzmembran für Membranpumpe mit Bypass PLASTIMO
1769*02 Membranpumpe mit Bypass PLASTIMO

from €129.90*

€139.90*

Prices incl. VAT plus shipping costs

Available, delivery time: 1 - 0 Tage

In stock

version
output
connection (mm)
B (mm)
L (mm)
H (mm)
Stk
A manual bilge pump with unique features:
Simple and space-saving bulkhead mounting, closed extruding only by 35 mm, operable at any time by a lever (elongated 320 mm long) that is extricable housed in the cover.
Universal installation of the pump with attached hose couplings (25 or 38 mm), that can freely rotate, are angulated and detachable.
Easy maintenance and simple membrane replacement.

Materials: the body of the pump (grey) and cover (white) are made from plastic,
lever stainless steel, membrane and valve are oil resistant nitrile rubber.

Employing the integrated bypass an additional electric bilge pump can be used.

Capacity 1l/hoisting, weight 920 g.
more information
Show 3 articles
📖 View article in the TOPLICHT catalogue

A manual bilge pump with unique features:
Simple and space-saving bulkhead mounting, closed extruding only by 35 mm, operable at any time by a lever (elongated 320 mm long) that is extricable housed in the cover.
Universal installation of the pump with attached hose couplings (25 or 38 mm), that can freely rotate, are angulated and detachable.
Easy maintenance and simple membrane replacement.

Materials: the body of the pump (grey) and cover (white) are made from plastic,
lever stainless steel, membrane and valve are oil resistant nitrile rubber.

Employing the integrated bypass an additional electric bilge pump can be used.

Capacity 1l/hoisting, weight 920 g.
Questions about the product?

Accessories

PVC Hose
PVC Hose
Inexpensive, thin-walled gray PVC-design. Can be installed in very small curves without a reduction in cross section.Not intended for installation below the waterline.

From €4.30 *
Details
Multiflex hose PVC
Multiflex hose PVC
Green transparent PVC hose for drinking water, bilge pumps (also suction side) and on-board toilets.Spiral strengthened and thick-walled version for use as suction or pressure hose.Approved for human consumption. Limited resistance to oil and grease (may harden).

From €4.90 *
Details
T-bolt clamp
T-bolt clamp
Heavy, wide hose clamps, made entirely of A2-stainless steel.Hexagonal bolt for easy mounting in hard-to-reach corners. Due to the width particularly well suited for hose mounting on board.Type: HEAVY DUTY.

From €5.90 *
Details
A2 Hose clamp narrow, type HL
A2 Hose clamp narrow, type HL
Solid V2A design, all pieces entirely rust-free.With hexagonal bolts for high torque,high tear resistance and elasticity.

From €1.75 *
Details
Bilge pump PLASTIMO with bypass
Bilge pump PLASTIMO with bypass
B (mm): --- | H (mm): --- | L (mm): --- | connection (mm): --- | output: --- | version: spare membrane
A manual bilge pump with unique features: Simple and space-saving bulkhead mounting, closed extruding only by 35 mm, operable at any time by a lever (elongated 320 mm long) that is extricable housed in the cover. Universal installation of the pump with attached hose couplings (25 or 38 mm), that can freely rotate, are angulated and detachable. Easy maintenance and simple membrane replacement. Materials: the body of the pump (grey) and cover (white) are made from plastic, lever stainless steel, membrane and valve are oil resistant nitrile rubber. Employing the integrated bypass an additional electric bilge pump can be used. Capacity 1l/hoisting, weight 920 g.

From €129.90 *
Details
Check valve PLASTIMO
Check valve PLASTIMO
Plastic non-return valve with oil-proof nitrile rubber valve. Suitable for bilge water systems or hand and electric bilge pumps.The valve housing is easy to open (for maintenance). In narrow spaces, the straight gland can be replaced with an angled one.Entire length 185mm.Non-return valves are integrated into the suction hose, support suction and prevent backflow of water.

From €8.90 *
Details

Similar products

Diaphragm bilge pump PLASTIMO 12760
Diaphragm bilge pump PLASTIMO 12760
Plastic manual bilge pump with membrane and vents of oil-proof nitrile rubber. The pump can be mounted very compactly (horizontally or vertically), so that eight different hose positions are possible. Self-priming (max. 2.5 m). Assets: - 25 mm gland, - Inlet, 30 l/min (capacity, 0.5 l/pump), - Handle length, 290 mm, - Weight, 500 g, - Color: body, blue; handle, black.

€69.00 *
Details
Diaphragm bilge pump PLASTIMO without outlets
Diaphragm bilge pump PLASTIMO without outlets
High-capacity plastic manual bilge pump (color: blue) with vent and membrane of oil-proof nitrile rubber. The pump is self-priming (max. 2.5 m).Comes without hose attachments (must be ordered seperatly, see Accessories).Inlet: 50 l/min (capacity, 0.85 l/pump).Handle length: 400 mm. Weight, 1 kg.Dimensions: 240 x 170 x 150 mm.Detachable lever. An inspection port allows easy cleaning of the pump.

€99.70 *
Details
Diapragm pump PLASTIMO with built-in outlets
Diapragm pump PLASTIMO with built-in outlets
High-capacity plastic manual bilge pump (color: blue) with vent and membrane of oil-proof nitrile rubber. The pump is self-priming (max. 3 m).Comes with straight hose attachment for 38 mm hose.Inlet: 50 l/min (capacity, 0.85 l/pump).Handle length: 400 mm, weight: 1 kg.Dimensions: 240 x 170 x 150 mm.Removable lever. An inspection port allows easy cleaning of the pump.

€99.70 *
Details
Bilge pump WHALE GUSHER URCHIN with fixed handle
Bilge pump WHALE GUSHER URCHIN with fixed handle
Compact, light membrane bilge pump.Housing made of black plastic with blue cover.Attachments are available for either 25 mm or 38 mm hoses.Shipping by default with membrane and valves made from robust neoprene rubber.Model with permanent plastic handle (BP 9005).

€89.00 *
Details

Last seen products