Pressure-water pump WHALE-UNIVERSAL UF1825

The very quiet running WHALE WaterMaster is a four chamber diaphragm pump - a further development of the tried and tested UNIVERSAL pump.The pump runs dry without damage (within reason) and is self priming up to 3m, it delivers a smooth constant flow from a specially designed diaphragm.The pump has a fully sealed protective motor housing with completely integrated electronics according to IP 65 and is suitable for use with salt or fresh water.The shipment includes a strainer to protect the pump from debris.Simple installation: WHALE QUICK-CONNECT - 15 mm quick connect plumbing or ½" horsetails or 13mm hose. Measurements (L x W x H): 209 x 179 x 125, Weight: 1600 g.

Very quiet running pressurized water pumps for simultaneous supply of fresh water taps on board. The compact fresh water supply pumps are rubber-mounted, self-priming and safe to run dry and they have a sealed protection switch. Quick Connect ports for hose connection without tools allow easy installation and servicing.Par-Max 1: Suitable for use on small boats with one or two taps. Comes without water strainer.Par-Max 2 und Par-Max 3: Pressurized water pumps for simultaneous supply of up to 3 fresh water taps on board. A Quick Connect water strainer is included.Par-Max HD4 und Par-Max HD5: High performance pressure water pumps for simultaneous supply of up to 5 fresh onboard water taps. The lower housing is made of powder-coated cast aluminum. The base plates have the same hole spacing as corresponding FLOJET pressurized water pumps. A Quick Connect water strainer is included.

The MARCO UPE pumps are electronically controlled freshwater gear pumps designed for pressurized onboard water systems. They deliver constant water pressure without pulsation, operate quietly, save space, and are suitable for multiple outlets.The MARCO UPE pumps are self-priming gear pumps with electronic speed control and smooth, gradual start-up. Their speed automatically adjusts to the water demand, eliminating pressure fluctuations and pulsation in the system. An accumulator tank is only required when using rigid or very short pipes or solenoid valves.The pump housings are made of nickel-plated brass, and the spindles are stainless steel. The durable PEEK gears ensure high pressure, quiet operation, and excellent temperature resistance. Integrated non-return valves are included as standard. The pumps support both 12 V and 24 V operation. Connections are BSP female threads, and each pump is supplied with matching stainless-steel hose tails.The electronic control enables soft start and stop, reducing power consumption and water waste while significantly extending component life — up to three times longer than comparable models. The electronic system constantly monitors pressure, current, and voltage, provides protection against short circuits and overvoltage, and automatically stops the pumps when the tank is empty.These pumps run very quietly, require minimal space, and ensure reliable water supply on board.Models:· Type UP2/E: for max. 2 outlets, without pre-filter· Type UP3/E, UP6/E, UP12/E: for max. 3 outlets, with pre-filter· Type UP14/E: for max. 3 outlets, with pre-filter and PCS control panelKey Advantages at a Glance:· Electronic speed control, adjusts to water demand· Smooth, gradual start and stop· No pressure fluctuations, no pulsation· Self-priming (not dry self-priming)· No accumulator tank required except with rigid/short pipes or solenoid valves· PEEK gears: high pressure, quiet running, temperature resistant· Integrated non-return valves· Electronic monitoring of pressure, current, voltage· Protection against short circuit and overvoltage· Automatic shut-off when tank is empty· Multi-voltage: 12 V / 24 V· BSP female thread connections, incl. stainless-steel hose tails· Very quiet operation· Robust materials: nickel-plated brass, stainless steel

High-performance universal pump with pressure switch, intended as a drinking-water pump (max. 5 taps) or as a deck-wash pump (comes with filter), laid out as a four-chamber membrane pump.The pump is self-priming to 2 m, can run dry safely and runs extremely quietly, thanks to rubber mountings.Attachment: plug with 19 mm hose nozzle, plug with 3/4" thread .We exclusively carry FLOJET pumps, which have been developed especially for the marine industry (not camping pumps).

The pump AQUA KING II Supreme 5.0 is a powerful fresh water pump in marine quality. The pump has been proven for years, has a quiet running and offers a usage comfort like at home.The 4-chamber diaphragm pump is self-priming up to 1.8 m and may run dry. A pre-filter ensures clean drinking water. The encapsulated pressure switch start at 2.8 bar and off again at 3.8 bar. The pump is equipped with an integrated bypass for precise and controlled dosing and even water flow, a pressure compensation vessel is not required.Technical features:4-chamber diaphragm pump,max. flow rate: 18.9 l/min,pressure: 2.8 - 3.8 bar,for supplying up to 5 taps,comes with a pre-filter,dry-self-priming and dry-running safe,motor and pump head drive made of metal,pump head and mounting foot made of PP,rubber bearing for a high running smoothness,the motor is explosion-proof,connection thread 1/2" external thread,delivery includes two hose nozzles for 13 mm hose, which can be screwed onto the thread with a quick-release fastener.

Stainless pressure tanks MARCO ATX. The tanks have an interior rubber diaphragm with preset pressure cushion and a SCHRADER valve to create the pressure.These accumulator tanks generate constant flow to the pressure-water system with limited pumping intervals and power draw.MARCO ATX1:Volume 0,5 l, Connection 3/8" BSP with stainless  T-connection.MARCO ATX2:Volume 2,0 l, Connection 1/2" BSP with stainless T-connection. Max. pressure of the tanks: 10 bar.

Plastic pressure tank which generates constant flow to the pressure-water system with limited pumping intervals and power draw. The tanks have an interior rubber diaphragm with preset pressure cushion and a SCHRADER vent to create the pressure.Connection 1/2" BSP.Max. pressure 10 bar.

Pressure tanks MARCO AT, made from steel, white coated. The tanks have an interior rubber diaphragm with preset pressure cushion and a SCHRADER valve to control the pressure.These accumulator tanks generate constant flow to the pressure-water system with limited pumping intervals and power draw.MARCO AT1: Volume 2,0 l. Connection 1/2" BSP.MARCO AT2: Volume 5,0 l. Connection 3/4" BSP.Max. pressure 10 bar.