Spare parts for water heater

ISOTEMP water heater

Water heater made from stainless steel for boats and ships by WEBASTO/INDEL-MARINE: the shielding gas welded water container is made from AISI 316.Water may be heated either by the engine's cooling water circulation or by the water circulation of a stove. Also the 230 V coil may heat the water.The heavy-walled PU isolation keeps the loss of temperature minimal, the outer casing and mounting bases are made from stainless steel AISI 304, the thermostat-controlled heating element, 230 volt / 750 watts, is made from nickel plated copper.Mounting is possible in the vertical and the horizontal position. Connections: 1/2" BSP.Integrated thermostat blending valve.Easy installation, shipped ready to assemble "plug and play".The boilers type - D consist of two heating coils. These boilers allow to connect an engine cooling circuit and a heater circuit.Spare parts and accessories are available on request.

From €570.00 *

Details

Water heater JOHNSON AQUA H

A free, environmentally friendly way to create warm water for showering and washing onboard is through the warmth of the engine or from the hot water system of a stove or heater.The heating of water to be used can also be achieved through the built-in, thermostat regulated 230 volt heater, heat output 500 watts (1200 watts heating unit available on requess), screw in thread 1 1/4".The tank is made of stainless steel AISI316, heating coil and unit are made of copper, the housing is fully insulated with PU foam, the outer jacket is of plastic and stailess steel sheet AISI304.Connections: 1/2" BSP pipe thread.Comes with pressure control valve, drain cock and corrosion-protection anode of magnesium.Can be mounted upright or reclined.

From €590.00 *

Details

Spare parts for water heater

The following spare parts are suitable for water heater models JOHNSON AQUA H and for models NAUTIC BOILER:

From €39.90 *

Details

Spare Parts for ISOTEMP Water Heater

A wide range of spare parts are available for the ISOTEMP water heater.

From €43.99 *

Details

Water heater ISOTEMP SPA

Hot water boiler SPA 30l have an integrated heating element (230V - 750 W), a combined safety and check valve and polyurethane insulation. Connections and water tank are made of stainless steel (AISI 316) and the outer shell is made of polypropylene. The thermostatically controlled heating element, 230 volts / 750 watts, is made of nickel-plated copper.The water can also be heated by the heated water from the cooling circuit of the machine.The thick-walled PU insulation ensures minimal temperature loss.Mounting is possible horizontally or vertically.Connections2x inlet/outlet engine cooling water (1/2" NPT male thread)1x fresh water connection (1/2" NPT male thread)1x hot water outlet (1/2" NPT male thread)1x waste water outlet

€499.00 *

Details

Mon - Fri:	09 am - 06 pm
Sat:	09 am - 01 pm

Spare parts for water heater

Spare parts for water heater

Description