Stain
2 products
EPIFANES Stain for Wood or Clear Varnish
From
€18.90 *
Quick-drying, solvent-based stain for coloring and tinting wood, available in reddish mahogany and reddish-brown teak.The stain is characterized by very long-lasting colour stability and can be painted over with most 1- and 2-component paint systems.Application: Shake can very well before use. Do not dilute. Apply the stain thinly and evenly in the direction of the grain. Up to three coats can be applied to increase the color intensity. After drying, the stain can be coated with all common clear coats, e.g. EPIFANES boat varnish or DD-POLY-URETHANE varnish.To conceal or even out color differences in existing clear coat systems, the stain can be mixed with up to 10 % of a clear coat to achieve uniform pigmentation. Can also be used for coloring WEST SYSTEM Epoxy  
LE TONKINOIS Yacht Oil Stain
From
€12.90 *
LE TONKINOIS Yacht Oil Stain is a plant oil-based, intensely colored wood pre-treatment for hardwood surfaces indoors and outdoors. The stain penetrates deeply into the wood and creates a uniform coloration with a pleasant feel. It is resistant to dirt and water-repellent, and the pigmentation increases UV protection. In boatbuilding it is suitable for matching the color of wooden surfaces on decks, superstructures and other heavily used surfaces. For adequate protection, a subsequent protective coating with LE TONKINOIS Vernis or Marine No.1 is recommended.Application: The surface must be dust- and grease-free and clean; the wood moisture should not exceed 15%. The stain is applied undiluted with a brush or roller to untreated wood. After a short exposure time, the excess is evenly distributed and removed with a lint-free cloth. It is recommended to create a test area beforehand. The processing temperature should be at least 12 °C. Walkability is achieved after three days with 2–3 coats.Technical DataField of application: Indoor and outdoor, e.g., boat decks, superstructures, wooden floorsSubstrate: Untreated wood, wood-based materialsCoverage: 35–50 ml/m² (depending on type of wood)Application method: Brushing with brush or rollerDrying times (at 20 °C): Dust-dry after 6–8 h, re-coatable after 12 h, walkable after 3 daysFor more information on processing, please refer to the technical data sheet under 'Downloads'.
