Storage box for CASSENS & PLATH boat compass

Available accessories for the compasses of the C20 series from AUTONAUTIC:Bearing device with degree ringB+C compensation magazinesThe bearing device is used for side bearings and compass bearings. The degree ring has a full-circle degree marking. A thread sight on the object side and a slit sight on the observer side are used for taking bearings. A shadow pin for insertion into the centre piece is included.The bearing device must be ordered together with the compass if required, as it requires factory adjustment.B+C Compensations are used to correct the ship's longitudinal (B) and transverse (C) fields. This compensation is generally recommended for all magnetic compasses.The compensation device consists of two magazines, one for the B compensation (neutralises the permanent fore-and-aft field and one for the C compensation (neutralises the permanent athwartships field). Both magazines are identical. The magazines can be opened by loosening the two screws visible at the top and removing the U-shaped covers. There are two magnets in each of the magazines that can be inserted into the different holes.

Universal spherical compass with bracket mount, well suited as a lifeboat compass.Internal cardanic with forward steering line and black, easy-to-read 5° rose with 85 mm rose diameter.Housing black plastic, total diameter approx. 110 mm, height 150 mm.MED/SOLAS approval 0474-23 Class B (Lifeboats/Rescueboats).The certificate is enclosed with the compass.Supplied with built-in, multi-voltage LED lighting (12V/24V).

AUTONAUTIC is a Spanish family business that has been manufacturing high-quality magnetic compasses and meteorological instruments for almost 50 years. The products are exported worldwide.The C20 series compasses are MED/SOLAS and USCG approved (US COASTGUARD) and are supplied with a certificate.The compasses are robust instruments specially designed for professional navigation and for vessels requiring equipment. They are available in various versions.Model C20-00137 is a fully gimballed steering compass with bracket mount.The bracket with the compass can be detached very quickly from the base plate, which is attached to the installation site. The compass has a card with a diameter of 125 mm and an easily readable 1° graduation.An azimuth device and compensation magazines B+C (in pairs) are available as accessories.

Steering compass in slightly oval design for built-in mounting.The installation as superstructure is also possible with the optionally available pedestal (height 75 mm).The black housing is equipped with a three-part visor, adjustable compensation magnets and an economical LED light for 12-24 Volts.Apparent rose diameter 115 mm. Deliverable in two versions: - article 3642-115 with a flat card, - article 3642-116 with a conical card. SOLAS, MED and steering wheel certified and as such approved for boats with requirements for commercial service. The mounting base (pedestal) is an accessory and must be ordered separately.

Anti-dazzle hood with aperture, for compass ZETA from CASSENS & PLATH.Available in brass or in black.

Anti-dazzle hood with aperture, for compass DELTA from CASSENS & PLATH.Available in brass or in black.

Anti-dazzle hood with aperture for CASSENS & PLATH compasses BETA/1 and BETA/2.Avaiable in black or white.

Compass model BETA/2 in brass housing with surface mount from the traditional manufacturer CASSENS & PLATH.high accuracy (pursuant to the ISO norms)the clear compass rose with 5° divisions allows the compass to be watched over long times without the viewerbecoming tired, even at nightshock and vibration proofshadow indicator for controlling deviation (azimuth bearing), as well as an antiglare 12 volt red lightfactory certificate includedavaiable in black or white

Plastic, matt black varnished case. Suited for every type of compass. Two magazines B and C to compensate with 2 magnets, that can be reversed calibrated. Usually the adjustment has to be performed by a professional. Shipment: 2 magazines 130 x 25 x 25 mm, detailed mounting instruction.

CASSENS & PLATH steering compass model DELTA/2 in brass housing with surface mount.high display accuracy (conforms to ISO norms)the clear rose (diameter 130 mm) with 5° divisions allows effortless reading over long times and at nightshock- and vibration-proofwith shadow pin for deviation control (azimuth bearing) as well as a 12V night-safe red lightfactory certificationavailable polished or painted black

Illumination unit for steering compass type 21 and 11, compasses BETA, IOTA, DELTA and ZETA from CASSENS & PLATH.

Oval deck plates (185 x 140 mm) with quick lock for IOTA/2 with bracket mounting are available. The 24 volt lighting is suitable for all IOTA Kompanten.

The CASSENS & PLATH IOTA/2 surface-mounted spherical compass with its fully cardanic bearing is suitable as a steering compass for console, wall (bulkhead) or ceiling mounting.The housing, the adjustable hood and the mounting bracket are made of brass and can be stove-enameled black or white. Under the polished mineral glass bell is the fully gimbal-mounted, black counter-sight compass rose with 5° graduation. The apparent diameter of the rose is 100 mm.Supplied with factory test certificate and 12 volt red light illumination element.Technical features:Dimensions: 160 x 165 x 127mmBearing: Fully cardanicApparent rose: Ø 100mmRolling clearance: /- 180°Stamp clearance: /- 180°A mounted B C compensation is recommended. With the cover plate (with or without B C compensation), the compass can be used in various positions. Both can be found under "Accessories".The IOTA/2 surface-mounted spherical compass is also available with MED approval. As IOTA/1, the compass is also available in a built-in version. Both versions can be found under "Similar products".

Accessory for the SIGMA compass from CASSENS & PLATH: - additional base plate (without gimbals), to allow mounting in various places onboard, - 12V or 24V lighting.

Full gimbal steering and bearing compass which is also well suited for larger steel yachts, as a compensation device (B+C, as well as K) is integrated on the base plate.Compensation, illumination, cover and bearing pin are included.SIGMA is available in black or white, the paint is seawater resistant.A typical installation location is the sliding hatch or the cabin deck, so that the reading can be taken from the helm station.Clear, easy to read scale with 5° graduation. When the cover is removed, the reading can be made from above on the horizontal rose. In backlit conditions, the cover is replaced and the compass can be read from the vertical rose.The SIGMA compass can be easily removed from its mounting within seconds and can then be safely stowed below deck. For this purpose an optional second base plate can be ordered which is fixed below deck. A second base plate can also be fitted to a second cruising stand so that the compass can be moved if required.The supplied shadow or bearing pin is used for astronomical deviation control.Each compass is individually tested and certified.Special Features:Integrated B+C, K compensationReadable from vertical rose when viewed upside down, from horizontal rose when viewed from aboveProfessional designFull cardanic bearingBlack rose with white 5° graduationTemperature stable -30°C to 60°C2 control lines for course control from different directionsLighting 12 or 24 VDCSeawater resistant painted brass housing with hoodA bearing attachment is available as an accessory to perform terrestrial as well as astronomical bearings.

Available accessories: compass arm for table setup, 24 volt lighting dimmer, B+C compensation (made from three plywood magazines 300 x 215 x 30mm, each with 4 magnets), bearing equipment in a plastic case.

MED/SOLAS approval (see under "Downloads & Information" further down on this page).Professional compass CASSENS & PLATH TYPE/11. The heavy flat glass compass with cardanic suspension is available in two versions.The TYPE/11 bearing/reflection compass is fitted with a brass graduated ring. The brass centre piece, onto which the bearing sight (available as an extra) is attached, is also located on the upper cover glass. This makes it possible to take bearings.The bearing/reflection compass is suitable for use in reflection compass systems and a bearing stand.The TYPE/11 steering compass corresponds to the bearing/reflection compass, but without the bearing ring and centre piece. The outer ring is black here.The steering compass is used as a ceiling or table steering compass or is used in reflection attachments.Technical data:Card diameter 180 mm (7½")Card print north under north (north under south possible as a chargeable extra)1° graduation3-digit numbers every 10°8 cardinal/intercardinal points marked separately1 steering aperture ahead and 1 aft1° graduation on the graduated ring of the bearing compassLongitudinal ship suspension, with bronze bearing bushesVibration-resistant expansion diaphragmUnder "Accessories" you will find the following extras further down on this page:A pair of compass arms for use as a table compass (Article-No. 3730-102)Azimuth device (Article-No. 3730-105)Steering magnifier (Article-No. 3730-108)Lighting element 12 or 24 volt (Article-No. 3730-112 and -124)Surface-mounted dimmer for 24 volt lighting (Article-No. 3730-106)B+C corrector (Article-No. 3730-101)D corrector (Article-No. 3730-107)Wooden storage box (Article-No. 3730-109)

MED/SOLAS approval (see under "Downloads & Information" further down on this page).Professional compass CASSENS & PLATH TYPE/11. The heavy flat glass compass with cardanic suspension is available in two versions.The TYPE/21 bearing/reflection compass is fitted with a brass graduated ring. The brass centre piece, onto which the bearing sight (available as an extra) is attached, is also located on the upper cover glass. This makes it possible to take bearings.The bearing/reflection compass is suitable for use in reflection compass systems and a bearing stand.The TYPE/21 steering compass corresponds to the bearing/reflection compass, but without the bearing ring and centre piece. The outer ring is black here.The steering compass is used as a ceiling or table steering compass or is used in reflection attachments.The TYPE/21 steering compass in the desk binnacle with hood is gimballed in the desk binnacle/160 (suspended in the fore-and-aft direction). The desk binnacle is approved for coastal navigation. The brass hood with insight placed on this GRP lower ring.The 24V lighting element, which is also included in the scope of delivery, illuminates the rose chart from above.To allow the compass to be tilted freely, the deck must be provided with a corresponding cut-out.Technical data:Card diameter 160 mm (6½")Card print north under north (north under south possible as a chargeable extra)1° graduation3-digit numbers every 10°8 cardinal/intercardinal points marked separately1 steering aperture ahead and 1 aft1° graduation on the graduated ring of the bearing compassLongitudinal ship suspension, with bronze bearing bushesVibration-resistant expansion diaphragmUnder "Accessories" you will find the following extras further down on this page:A pair of compass arms for use as a table compass (Article-No. 3730-102)Azimuth device (Article-No. 3730-105)Steering magnifier (Article-No. 3730-108)Lighting element 12 or 24 volt (Article-No. 3730-112 and -124)Surface-mounted dimmer for 24 volt lighting (Article-No. 3730-106)B+C corrector (Article-No. 3730-101)D corrector (Article-No. 3730-107)Wooden storage box (Article-No. 3730-109)

CASSENS & PLATH TYPE/51 - the flat glass compass made of brass with full cardanic suspension is a traditional lifeboat compass. It complies with ISO 25862.Made of brass, the housing is stove-enamelled black, the ring and gimbal are made of polished brass.The compass has a traditional compass card with a diameter of 100 mm and international 2° graduations.It is supplied in a wooden storage case with a sliding lid.This traditional brass lifeboat compass in a wooden box is also ideal as an elegant gift.

CASSENS & PLATH TYPE/51 - the flat glass compass with full cardanic suspension is a traditional lifeboat compass. It complies with ISO 25862.Made of brass, the housing is stove-enamelled grey, the ring and gimbal are black.The compass has a traditional compass card with a diameter of 100 mm and 5° graduation.A wooden storage box with sliding lid (Article-No. 3740-010) and a brass compass house with petroleum lighting (one-piece, Article-No. 3740-011 or two-piece -012) can be found further down on this page under "Accessories".

In brass housing. Steering compass series with high display accuracy (conforms to ISO norms). The clear rose (diameter 120 mm) with 5° divisions allows effortless reading over long times and at night. Shock- and vibration-proof. With shadow pin for deviation control (azimuth bearing) as well as a 12V night-safe red light. Certified. Available polished or painted black. Built-up version ZETA/2.

The yacht compass MERKUR S-R can be mounted on the bulkhead or on the console with the bracket mount (please order separately).120 mm apparent rose diameter, weight 1.6 kg oscillation period >4,7 sec.The full sphere, solid construction with gimbaled inner hanger ensure smooth and precise reading under all conditions. Seawater resistant aluminium housing, anodised and black powder-coated, impact and scratch resistant mineral glass dome, clear 5° compass card with three lubber lines.Comes with 12 V lighting (24 V is optional).Top quality, 'Made in Hamburg': For more than 150 years, C. PLATH's quality compasses have been appreciated worldwide.

100BC is a front reading compass with a solid bracket that enables various mounting alternatives, including on the headlining. It has a main steering scale on the horizontal part of the compass rose and direct reading on the vertical edge. This makes the compass ideal for boats with a sitting as well as a standing helmsman. The integrated illumination makes night navigation easier. The built-in compensator allows you to adjust the compass if it is disturbed by a magnetic deviation. Apperant card diameter 100 mm.

The SILVA 100NBC compass with its solid bracket permits various mounting alternatives. The 100NBC has yellow 45° gimbal-mounted steerage markers, 5° twin dials and damped compass rose (apparent card diameter 100 mm).With Illumination,built-in compensation and visor.