Universal holder for NISSEN-MARINE mooring light | TOPLICHT

To be able to use the full range of Shopware 6, we recommend activating Javascript in your browser.

Description

Dieser Halter dient als Ersatz für die mit der LED-Festliegeleuchte NISSEN CAMPLITE mitgelieferte Halterung.

Questions about the product?

Questions about the product?

Talk to craftsmen, boat builders and sailors. We understand your questions and provide the right answers.

Contact experts

3351-002 LED-Festliegeleuchte NISSEN CAMPLITE

LED mooring light NISSEN CAMPLITE

LED rotating beacon made of plastic with white acrylic glass lens and twilight switch.Can be used to mark moored ships in inland and harbor shipping or universally as an exterior or interior light, switchable continuous light/flashing light.Power supply: One 6 V block battery (operating time continuous light 300 h with 7 Ah battery or 1400 h with 50 Ah battery).Supplied with suspension bracket, universal mounting bracket, key and safety switch but without battery.The key is used to open the lamp and to switch the light modes.Protection class IP 54, light intensity 15 cd.Dimensions 80 x 80 x 200 mm.BSH approval is not available.

€83.50 *

Spare key for NISSEN-MARINE mooring light

Spare key for NISSEN-MARINE mooring light

This key serves as a replacement for the key supplied with the NISSEN CAMPLITE LED fixed-bed light for opening the light and switching the light modes (continuous light/flashing light).

€7.95 *

More Products from Category Mountings & accessories

3336*04 DHR 35 Montage-Adapter

DHR 35 Mounting Adapter

Original adapter feet from DEN HAAN ROTTERDAM for the navigation and signal lights of the 35 series. With the adapters all lanterns - except the heatable version - can be converted. The mast and angle adapters are made of seawater-resistant stainless steel, the foot base and the tube adapter are made of robust plastic. The adapters are simply screwed onto the lantern from below with a plastic ring.

From €55.00 *

3336-100 Adapter für DHR 35 Navigationslichter

DHR 35 wind-indicator adapter

Adapter for wind indicator suitable for navigation light series DHR 35.

€14.90 *

3344-102 Saugnapf-Halterung NAVISAFE gebogen

Flexible suction cup mount NAVISAFE magnetic

With the suction cup holder specially developed for the Navisave Navilight 360° LED, the LED light can be easily attached to smooth surfaces.All brackets are supplied without the light, which can be found under "Accessories & spare parts".

€45.00 *

3254-398/-399 HELLA NaviLED Pro Adapter für Decksmontage

HELLA NaviLED PRO Deck Mounting Adapter

With the deck mount adapter, HELLA Pro series navigation lights can also be installed on horizontal surfaces. It allows for more mounting options, as well as raising the height of the navigation light by 50%.Suitable for the port, starboard, stern, and top version. Innovative design makes the mounting adapter invisible. The adapter is available in black or white to match the navigation lights.

From €27.00 *

1845*07 Lampenbretter Teak

Lamp boards teak (pairs)

Solidly made nav-light boards made from untreated teak, grooved, epoxied, fastened, grafted, and cleanly sanded.Suitable for protecting the lamp and as a glare shield.Compatible with nav-lights PB410, PB420, and AQUA SIGNAL 40. The boards are shipped in pairs (1 x port, 1 x starboard!

€89.00 *

1700*08 Lampenmastkörbe Edelstahl

Lamp guards stainless steel

The high-quality mast baskets from Niro Petersen in Flensburg protect the steaming light on the mast in the small version, or the steaming light with deck lantern in the large version. This prevents sails and halyards from getting caught on the lamp. The lamp mast baskets are made of stainless steel and have slightly curved tabs, which makes mounting on the mast profile easier.Stainless steel and aluminum must be separated from each other during installation. We recommend using the ANTI-SEIZE assembly paste (Art. No.: 2821-010).

From €51.50 *

3233*02 Aufsteckhaken für PB420 / PB422 Laternen

Mounting bracket for PB420 / PB410 lamps

Stainless steel mounting kit for Peters & Bey navigation lanterns type PB420 and PB410. The bracket is mounted on the rear wall of the lantern and can be firmly locked with the slip-on hook mounted on the boat.Supplied without lantern.

€41.00 *

3236*01 Aufsteckhaken für Positionslaternen PB 410

Mounting for PB 410

Mounting bracket for PB 410 navigation lights.Inox.Short or long version available.

From €14.95 *

3236*03 Montageplatte stehend für Positionslaternen PB

Mounting plate upright for navigation lights PB

Vertical mounting plate for Peters & Bey position lanterns.

€48.00 *

3349*01 Positionslampen Überwachung Traditionsschiff

Navigation light control gaff rigged cutter

With the electronic position light monitoring - an exclusive TOPLICHT design for traditional ships - the failure of a bulb or LED in a navigation light or a wiring break is shown. Up to 5 lights can be monitored (starboard / port, steaming, stern, anchor light). The failure of a light is sent over the electronics, and the matching LED on the display goes off. Additionally, an alarm LED is lit and an acoustic signal rung, which may be acknowledged by pushing a key. Intended for 12 V or 24 V systems, maximum power per signal 3 A. The electronic connection can be mounted separatly. Measurements of the display: (B x H) 110 x 145 mm, measurements of the electronics:(B x H x T) 90 x 125 x 35 mm. Existing lighting systems can easily be upgraded with this alert panel.

€198.00 *

3349*03 Positionslampen Überwachung Ketsch

Navigation light control ketch

With the electronic position light monitoring the failure of a bulb or LED in a navigation light or a wiring break is indicated. Up to 5 lights can be monitored (starboard / port, steaming, stern, anchor light). The failure of a light is sent over the electronics, and the matching LED on the display goes off. Intended for 12 V or 24 V systems, maximum power per signal 3 A. The electronic connection can be mounted separatly.Measurements of the display: (B x H) 110 x 145 mm, measurements of the electronics: (B x H x T) 90 x 125 x 35 mm. Existing lighting systems can easily be upgraded with this alert panel.

€198.00 *

3349*04 Positionslampen Überwachung Motoryacht

Navigation light control motor yacht

With the electronic position light monitoring the failure of a bulb or LEDin a navigation light or a wiring break is indicated. Up to 5 lights can be monitored (starboard / port, steaming, stern, anchor light). The failure of a light is sent over the electronics, and the matching LED on the display goes off. Intended for 12 V or 24 V systems, maximum power per signal 3 A. The electronic connection can be mounted separatly.Measurements of the display: (B x H) 145 x 115 mm, measurements of the electronics: (B x H x T) 90 x 125 x 35 mm. Existing lighting systems can easily be upgraded with this alert panel.

€198.00 *

3349*02 Positionslampen Überwachung Segelyacht

Navigation light control sailing yacht

The electronic position light monitoring indicates the failure of a bulb or LED in a navigation light or a wiring failure. Up to 6 lights can be monitored (starboard / port, steaming, stern, anchor and tricolour masttop light). The failure of a light is sent over the electronics, and the matching LED on the display goes off. Additionally, an alarm LED is lit and an acoustic signal rung, which can be acknowledged by pushing a key, until the problem is fixed. Intended for 12 V or 24 V systems, maximum power per signal 3 A. The electronic connection is mounted behind the aluminium display-plate. Measurements of the display: (B x H) 110 x 145 mm. Measurements of the electronics: (B x H x T) 90 x 125 x 35 mm. Existing lighting systems can easily be upgraded with this alert panel.

€198.00 *

3344-104 Magnet-Halterung NAVISAFE

NAVISAFE magnetic holder

With the magnetic holder specially developed for the Navisave Navilight 360° LED, the LED light can be easily attached to all surfaces. The magnetic holder is attached with a 5mm countersunk screw in the center (screw not included).All brackets are supplied without light, which can be found under "Accessories & spare parts".

€19.90 *

3344-101 NAVISAFE Masthalterung

Pole mount NAVISAFE 1 m with mounting material

With the pole mount specially developed for the Navisave Navilight 360° LED, the LED light can be easily attached to any surface on the pole supplied.All brackets are supplied without light, which can be found under "Accessories & spare parts".

€71.95 *

3344-103 Relinghalterung NAVISAFE

Railing attachment NAVISAFE Ø 25 mm magnetic

With the railing bracket specially developed for the Navisave Navilight 360° LED, the LED light can be easily attached to the railing.All brackets are supplied without light, which can be found under "Accessories & spare parts".

€25.00 *

BSH certificate

3351-103 LED Festliegeleuchte / Universalhalter

Replacement holder LED fixed bed light/LED emergency light R

This bracket serves as a replacement bracket for the bracket included in the scope of delivery for the LED fixed position light / LED emergency light in accordance with RheinSchPV.

€13.50 *

3336-108 DHR35-Ersatzfassung BaY15d

Replacement socket for DHR35 position lanterns with BaY15d b

Replacement socket with BaY15d base as spare part for DHR35 position lanterns.Wire end ferrules (e.g. item no. 4364-002) are required for connection to stranded cable (e.g. item no. 2213-115).

€25.00 *

3236*07 Fassung BaY15d für Positionslaternen PB 400

Socket BaY15d for navigation lights PB 400

Mounting accessory and spare parts for PB lights:

€15.90 *

3245*03 Ersatzglas für Rundumlicht FORESTI

Spare glass for all-round light FORESTI

Replacement glass for the all-round light (Art-Nr. 3245-...). FORESTI & SUARDI Lights. Coming from a crafts business, established in 1961, the north Italian brass foundry FORESTI &SUARDI Has become a modern industrial company that hasn't forgot about its traditional roots. Nowadays FORESTI manufactures all kinds of boat fittings, ship windows, sanitary accessories, interior fittings And especially a wide range of high quality lights for the use on ships but also on land.

€16.51 *

Spare key for NISSEN-MARINE mooring light

Spare key for NISSEN-MARINE mooring light

This key serves as a replacement for the key supplied with the NISSEN CAMPLITE LED fixed-bed light for opening the light and switching the light modes (continuous light/flashing light).

€7.95 *

BSH certificate

3351-105 Ersatzschlüssel LED Festliegeleuchte/LED Notlicht RheinSchPV

Spare key LED fixed bed light/LED emergency light RheinSchPV

This key serves as a replacement for the key supplied with the LED fixed position light / LED emergency light in accordance with RheinSchPV for changing the batteries.

€10.50 *

BSH certificate

3230*02 Ersatzteile für Navigationslichter PB410 - Bild 1

Spare parts for navigation lights PB 410

Lenses and seals are available as replacement parts for our sturdy and durable PETERS & BEY navigation lights, so these lanterns can remain functional for decades. Poycarbonate lenses of navigationlights can become brittle and dull after years of UV exposure, so replacing the lenses may be advisable. The lenses come with four pop rivets, and the seal kit includes two soft rubber seals. The electrical insert with bayonet socket is also replaceable.

From €5.00 *

Last seen products

Request sent successfully

Request wasn't send - a error occured. Please try again.