Mounting for PB 410 | TOPLICHT

To be able to use the full range of Shopware 6, we recommend activating Javascript in your browser.

Art. No.	description	model	L (mm)	Price (unit)	Delivery time	Note list	Buy

Description

Mounting bracket for PB 410 navigation lights.
Inox.
Short or long version available.

Questions about the product?

Talk to craftsmen, boat builders and sailors. We understand your questions and provide the right answers.

Contact experts

More Products from Category Mountings & accessories

3336*04 DHR 35 Montage-Adapter

DHR 35 Mounting Adapter

Original adapter feet from DEN HAAN ROTTERDAM for the navigation and signal lights of the 35 series. With the adapters all lanterns - except the heatable version - can be converted. The mast and angle adapters are made of seawater-resistant stainless steel, the foot base and the tube adapter are made of robust plastic. The adapters are simply screwed onto the lantern from below with a plastic ring.

From €55.00 *

DHR 35 wind-indicator adapter

DHR 35 wind-indicator adapter

Adapter for wind indicator suitable for navigation light series DHR 35.

€14.90 *

HELLA NaviLED PRO Deck Mounting Adapter

HELLA NaviLED PRO Deck Mounting Adapter

With the deck mount adapter, HELLA Pro series navigation lights can also be installed on horizontal surfaces. It allows for more mounting options, as well as raising the height of the navigation light by 50%.Suitable for the port, starboard, stern, and top version. Innovative design makes the mounting adapter invisible. The adapter is available in black or white to match the navigation lights.

From €27.00 *

Lamp boards teak (pairs)

Lamp boards teak (pairs)

Solidly made nav-light boards made from untreated teak, grooved, epoxied, fastened, grafted, and cleanly sanded.Suitable for protecting the lamp and as a glare shield.Compatible with nav-lights PB410, PB420, and AQUA SIGNAL 40. The boards are shipped in pairs (1 x port, 1 x starboard!

€89.00 *

1700*08 Lampenmastkörbe Edelstahl

Lamp guards stainless steel

The high-quality mast baskets from Niro Petersen in Flensburg protect the steaming light on the mast in the small version, or the steaming light with deck lantern in the large version. This prevents sails and halyards from getting caught on the lamp. The lamp mast baskets are made of stainless steel and have slightly curved tabs, which makes mounting on the mast profile easier.Stainless steel and aluminum must be separated from each other during installation. We recommend using the ANTI-SEIZE assembly paste (Art. No.: 2821-010).

From €42.99 *

Mounting bracket for PB420 / PB410 lamps

Mounting bracket for PB420 / PB410 lamps

Stainless steel mounting kit for Peters & Bey navigation lanterns type PB420 and PB410. The bracket is mounted on the rear wall of the lantern and can be firmly locked with the slip-on hook mounted on the boat.Supplied without lantern.

€41.00 *

Mounting for PB 410

Mounting for PB 410

Mounting bracket for PB 410 navigation lights.Inox.Short or long version available.

From €14.95 *

Mounting plate upright for navigation lights PB

Mounting plate upright for navigation lights PB

Vertical mounting plate for Peters & Bey position lanterns.

€48.00 *

Navigation light control gaff rigged cutter

Navigation light control gaff rigged cutter

With the electronic position light monitoring - an exclusive TOPLICHT design for traditional ships - the failure of a bulb or LED in a navigation light or a wiring break is shown. Up to 5 lights can be monitored (starboard / port, steaming, stern, anchor light). The failure of a light is sent over the electronics, and the matching LED on the display goes off. Additionally, an alarm LED is lit and an acoustic signal rung, which may be acknowledged by pushing a key. Intended for 12 V or 24 V systems, maximum power per signal 3 A. The electronic connection can be mounted separatly. Measurements of the display: (B x H) 110 x 145 mm, measurements of the electronics:(B x H x T) 90 x 125 x 35 mm. Existing lighting systems can easily be upgraded with this alert panel.

€198.00 *

Navigation light control ketch

Navigation light control ketch

With the electronic position light monitoring the failure of a bulb or LED in a navigation light or a wiring break is indicated. Up to 5 lights can be monitored (starboard / port, steaming, stern, anchor light). The failure of a light is sent over the electronics, and the matching LED on the display goes off. Intended for 12 V or 24 V systems, maximum power per signal 3 A. The electronic connection can be mounted separatly.Measurements of the display: (B x H) 110 x 145 mm, measurements of the electronics: (B x H x T) 90 x 125 x 35 mm. Existing lighting systems can easily be upgraded with this alert panel.

€198.00 *

Navigation light control motor yacht

Navigation light control motor yacht

With the electronic position light monitoring the failure of a bulb or LEDin a navigation light or a wiring break is indicated. Up to 5 lights can be monitored (starboard / port, steaming, stern, anchor light). The failure of a light is sent over the electronics, and the matching LED on the display goes off. Intended for 12 V or 24 V systems, maximum power per signal 3 A. The electronic connection can be mounted separatly.Measurements of the display: (B x H) 145 x 115 mm, measurements of the electronics: (B x H x T) 90 x 125 x 35 mm. Existing lighting systems can easily be upgraded with this alert panel.

€198.00 *

Navigation light control sailing yacht

Navigation light control sailing yacht

The electronic position light monitoring indicates the failure of a bulb or LED in a navigation light or a wiring failure. Up to 6 lights can be monitored (starboard / port, steaming, stern, anchor and tricolour masttop light). The failure of a light is sent over the electronics, and the matching LED on the display goes off. Additionally, an alarm LED is lit and an acoustic signal rung, which can be acknowledged by pushing a key, until the problem is fixed. Intended for 12 V or 24 V systems, maximum power per signal 3 A. The electronic connection is mounted behind the aluminium display-plate. Measurements of the display: (B x H) 110 x 145 mm. Measurements of the electronics: (B x H x T) 90 x 125 x 35 mm. Existing lighting systems can easily be upgraded with this alert panel.

€198.00 *

NAVISAFE NAVILIGHT 360 Accessories

NAVISAFE NAVILIGHT 360 Accessories

The specially designed brackets enable easy and versatile mounting options of the Navilight LED-light on almost every surface.The pole mount consists of four parts and can be screwed together to form a 1 m long light pole. An adapter is included for mounting the Navilight with a magnetic base.The suction cup mount with flexible arm can be mounted horizontally as well as vertically and fits Navilight lights with magnet.The railing mount can be attached to tubes with a diameter of approx. 25 mm and can be swiveled 180°. the mount consists of a metal plate for the Navilight with magnetic base.All accessories come without the Navilight, you can find it under "accessories".

From €25.00 *

Replacement socket for DHR35 position lanterns with BaY15d b

Replacement socket for DHR35 position lanterns with BaY15d b

Replacement socket with BaY15d base as spare part for DHR35 position lanterns.Wire end ferrules (e.g. item no. 4364-002) are required for connection to stranded cable (e.g. item no. 2213-115).

€25.00 *

Socket BaY15d for navigation lights PB 400

Socket BaY15d for navigation lights PB 400

Mounting accessory and spare parts for PB lights:

€15.90 *

Spare glass for all-round light FORESTI

Spare glass for all-round light FORESTI

Replacement glass for the all-round light (Art-Nr. 3245-...). FORESTI & SUARDI Lights. Coming from a crafts business, established in 1961, the north Italian brass foundry FORESTI &SUARDI Has become a modern industrial company that hasn't forgot about its traditional roots. Nowadays FORESTI manufactures all kinds of boat fittings, ship windows, sanitary accessories, interior fittings And especially a wide range of high quality lights for the use on ships but also on land.

€16.51 *

BSH certificate

Spare parts for navigation lights PB 410

Spare parts for navigation lights PB 410

Lenses and seals are available as replacement parts for our sturdy and durable PETERS & BEY navigation lights, so these lanterns can remain functional for decades. Poycarbonate lenses of navigationlights can become brittle and dull after years of UV exposure, so replacing the lenses may be advisable. The lenses come with four pop rivets, and the seal kit includes two soft rubber seals. The electrical insert with bayonet socket is also replaceable.

From €5.00 *

Last seen products

Request sent successfully

Request wasn't send - a error occured. Please try again.