NAVISAFE Mount for RIBs (Inflatable Boats)
Navisafe Navimount Mount for RIBs, compatible with Navilights featuring a Navimount base. The mount is designed for adhesive installation on Hypalon, polyethylene, or PVC surfaces. It features a 3M adhesive on the underside.
Color: White
Packaging unit: 1 pc.
Prices incl. VAT plus shipping costs
In stock
Description
Navisafe Navimount Mount for RIBs, compatible with Navilights featuring a Navimount base. The mount is designed for adhesive installation on Hypalon, polyethylene, or PVC surfaces. It features a 3M adhesive on the underside.
Color: White
Packaging unit: 1 pc.
A versatile, battery-powered LED navigation light that, thanks to its compact design and light weight of just 155 g, is particularly popular for small dinghies, inflatable boats, kayaks, and SUPs. The navigation lights are MED-approved.The housing is made of durable plastic, is buoyant, and is waterproof to a depth of 20 m.With its magnetic base and the included magnetic plate, the LED light can either be permanently mounted or clamped between thin materials such as plastic film or fabric. You can find compatible Navilight mounts below under "Accessories." The position light is powered by 3 AAA batteries, which are not included.The Navilights have several adjustable light modes with corresponding burn times:Navilight 360° (white):360° rotating light (15 hours)360° flashing light (85 hours)225° masthead light (24 hours)135° stern light (32 hours)360° Dimmable Cabin Light (72 hrs.)Navilight 360° TriColor360° tri-color light (green/red/white) 225° dual side light (green/red)112.5° side light (green or red)135° stern light (white)
Original adapter feet from DEN HAAN ROTTERDAM for the navigation and signal lights of the 35 series. With the adapters all lanterns - except the heatable version - can be converted. The mast and angle adapters are made of seawater-resistant stainless steel, the foot base and the tube adapter are made of robust plastic. The adapters are simply screwed onto the lantern from below with a plastic ring.
Adapter for wind indicator suitable for navigation light series DHR 35.
With the suction cup holder specially developed for the Navisave Navilight 360° LED, the LED light can be easily attached to smooth surfaces.All brackets are supplied without the light, which can be found under "Accessories & spare parts".
With the deck mount adapter, HELLA Pro series navigation lights can also be installed on horizontal surfaces. It allows for more mounting options, as well as raising the height of the navigation light by 50%.Suitable for the port, starboard, stern, and top version. Innovative design makes the mounting adapter invisible. The adapter is available in black or white to match the navigation lights.
Solidly made nav-light boards made from untreated teak, grooved, epoxied, fastened, grafted, and cleanly sanded.Suitable for protecting the lamp and as a glare shield.Compatible with nav-lights PB410, PB420, and AQUA SIGNAL 40. The boards are shipped in pairs (1 x port, 1 x starboard!
The high-quality mast baskets from Niro Petersen in Flensburg protect the steaming light on the mast in the small version, or the steaming light with deck lantern in the large version. This prevents sails and halyards from getting caught on the lamp. The lamp mast baskets are made of stainless steel and have slightly curved tabs, which makes mounting on the mast profile easier.Stainless steel and aluminum must be separated from each other during installation. We recommend using the ANTI-SEIZE assembly paste (Art. No.: 2821-010).
Aluminum mounting bracket for attaching K2W S64 CLASSIC navigation lights for bow and stern.
Stainless steel mounting kit for Peters & Bey navigation lanterns type PB420 and PB410. The bracket is mounted on the rear wall of the lantern and can be firmly locked with the slip-on hook mounted on the boat.Supplied without lantern.
Stainless steel (A2) mounting bracket for navigation lights K2W S64 CLASSIC for the mast.
Mounting brackets made of aluminum for attaching K2W S64 CLASSIC navigation lights to the masthead.
Stainless steel (A2) mounting bracket for navigation lights K2W S64 CLASSIC for the port side light.
Stainless steel (A2) mounting bracket for navigation lights K2W S64 CLASSIC for the starboard side light.
Mounting bracket for PB 410 navigation lights.Inox.Short or long version available.
Vertical mounting plate for Peters & Bey 410 series position lights.
With the electronic position light monitoring - an exclusive TOPLICHT design for traditional ships - the failure of a bulb or LED in a navigation light or a wiring break is shown. Up to 5 lights can be monitored (starboard / port, steaming, stern, anchor light). The failure of a light is sent over the electronics, and the matching LED on the display goes off. Additionally, an alarm LED is lit and an acoustic signal rung, which may be acknowledged by pushing a key. Intended for 12 V or 24 V systems, maximum power per signal 3 A. The electronic connection can be mounted separatly. Measurements of the display: (B x H) 110 x 145 mm, measurements of the electronics:(B x H x T) 90 x 125 x 35 mm. Existing lighting systems can easily be upgraded with this alert panel.
With the electronic position light monitoring the failure of a bulb or LEDin a navigation light or a wiring break is indicated. Up to 5 lights can be monitored (starboard / port, steaming, stern, anchor light). The failure of a light is sent over the electronics, and the matching LED on the display goes off. Intended for 12 V or 24 V systems, maximum power per signal 3 A. The electronic connection can be mounted separatly.Measurements of the display: (B x H) 145 x 115 mm, measurements of the electronics: (B x H x T) 90 x 125 x 35 mm. Existing lighting systems can easily be upgraded with this alert panel.
The electronic position light monitoring indicates the failure of a bulb or LED in a navigation light or a wiring failure. Up to 6 lights can be monitored (starboard / port, steaming, stern, anchor and tricolour masttop light). The failure of a light is sent over the electronics, and the matching LED on the display goes off. Additionally, an alarm LED is lit and an acoustic signal rung, which can be acknowledged by pushing a key, until the problem is fixed. Intended for 12 V or 24 V systems, maximum power per signal 3 A. The electronic connection is mounted behind the aluminium display-plate. Measurements of the display: (B x H) 110 x 145 mm. Measurements of the electronics: (B x H x T) 90 x 125 x 35 mm. Existing lighting systems can easily be upgraded with this alert panel.
With the magnetic holder specially developed for the Navisave Navilight 360° LED, the LED light can be easily attached to all surfaces. The magnetic holder is attached with a 5mm countersunk screw in the center (screw not included).All brackets are supplied without light, which can be found under "Accessories & spare parts".
With the pole mount specially developed for the Navisave Navilight 360° LED, the LED light can be easily attached to any surface on the pole supplied.All brackets are supplied without light, which can be found under "Accessories & spare parts".
With the railing bracket specially developed for the Navisave Navilight 360° LED, the LED light can be easily attached to the railing.All brackets are supplied without light, which can be found under "Accessories & spare parts".
This bracket serves as a replacement bracket for the bracket included in the scope of delivery for the LED fixed position light / LED emergency light in accordance with RheinSchPV.
Replacement lenses and gaskets are available for our sturdy and durable PETERS & BEY navigation lights, ensuring that these lanterns can remain fully functional even after decades of use. Polycarbonate lenses on position lights can become brittle and dull after years of UV exposure, so replacing the lenses may be advisable. The lenses come with four pop rivets, and the gasket set includes two soft rubber gaskets. The electrical insert with a bayonet socket is also replaceable.
Replacement socket with BaY15d base as spare part for DHR35 position lanterns.Wire end ferrules (e.g. item no. 4364-002) are required for connection to stranded cable (e.g. item no. 2213-115).
Mounting accessory and spare parts for PB lights:
