Distributional panel PHILIPPI with switch and socket
The aluminum circuit boards are black coated, a sheet with 170 punched vinyl labels is included.
Coplete with socket or with socket and USB-socket .
Switching with rocker switches. Control with green light diodes.
The attachment is made through 6.3 mm flat pin lights.
Intended for 12 V or 24 V systems.
Larger switch panels with volt/amp measuring devices and navigation light monitoring available by request.
Accessory: Series terminals with attachment terminals on a DIN rail serve to create clear attachment of the conduits and the switch panels.
The negative poles are bridged as a busbar.
from €162.00*
€162.00
Prices incl. VAT plus shipping costs
Description
These circuit breakers are ready-wired switch panels, equipped with a proven thermal circuit breaker from the German manufacturer ETA, type 1140 8 amp.
The aluminum circuit boards are black coated, a sheet with 170 punched vinyl labels is included.
Coplete with socket or with socket and USB-socket .
Switching with rocker switches. Control with green light diodes.
The attachment is made through 6.3 mm flat pin lights.
Intended for 12 V or 24 V systems.
Larger switch panels with volt/amp measuring devices and navigation light monitoring available by request.
Accessory: Series terminals with attachment terminals on a DIN rail serve to create clear attachment of the conduits and the switch panels.
The negative poles are bridged as a busbar.
Original stickers for PHILIPPI circuit distribution panels and switchboards. The stickers fit exactly into the designated frames on the panel and are self-adhesive. A total of 204 labels on three vinyl backing sheets should cover just about every need for labeling a fuse or circuit on board a yacht or ship. Language: German.Upon request, the sets can also be ordered in English, Dutch, Danish, Spanish, French, or Polish.
The electronic position light monitoring indicates the failure of a bulb or LED in a navigation light or a wiring failure. Up to 6 lights can be monitored (starboard / port, steaming, stern, anchor and tricolour masttop light). The failure of a light is sent over the electronics, and the matching LED on the display goes off. Additionally, an alarm LED is lit and an acoustic signal rung, which can be acknowledged by pushing a key, until the problem is fixed. Intended for 12 V or 24 V systems, maximum power per signal 3 A. The electronic connection is mounted behind the aluminium display-plate. Measurements of the display: (B x H) 110 x 145 mm. Measurements of the electronics: (B x H x T) 90 x 125 x 35 mm. Existing lighting systems can easily be upgraded with this alert panel.
With the electronic position light monitoring the failure of a bulb or LEDin a navigation light or a wiring break is indicated. Up to 5 lights can be monitored (starboard / port, steaming, stern, anchor light). The failure of a light is sent over the electronics, and the matching LED on the display goes off. Intended for 12 V or 24 V systems, maximum power per signal 3 A. The electronic connection can be mounted separatly.Measurements of the display: (B x H) 145 x 115 mm, measurements of the electronics: (B x H x T) 90 x 125 x 35 mm. Existing lighting systems can easily be upgraded with this alert panel.
With the electronic position light monitoring - an exclusive TOPLICHT design for traditional ships - the failure of a bulb or LED in a navigation light or a wiring break is shown. Up to 5 lights can be monitored (starboard / port, steaming, stern, anchor light). The failure of a light is sent over the electronics, and the matching LED on the display goes off. Additionally, an alarm LED is lit and an acoustic signal rung, which may be acknowledged by pushing a key. Intended for 12 V or 24 V systems, maximum power per signal 3 A. The electronic connection can be mounted separatly. Measurements of the display: (B x H) 110 x 145 mm, measurements of the electronics:(B x H x T) 90 x 125 x 35 mm. Existing lighting systems can easily be upgraded with this alert panel.
These circuit breakers are ready-wired switch panels, equipped with a proven thermal circuit breaker from the German manufacturer ETA, type 1140 8 amp.The aluminum circuit boards are black coated, a labeling sheet with 170 punched vinyl labels is included.Switching function through rocker switches, control through green light diodes.The attachment is made through 6.3 mm flat pin terminals.Intended for 12 V or 24 V systems.Larger switch panels with volt/amp measuring devices and nav. light monitoring available by request.Accessory: Series terminals with attachment terminals on a DIN rail serve to create clear attachment of the conduits and the switch panels.
These circuit breakers are ready-wired switch panels, equipped with a proven thermal circuit breaker from the German manufacturer ETA, type 1140 8 amp.The aluminum circuit boards are black coated, a labeling sheet with 170 punched vinyl labels is included.Without switch. Control through green light diodes.The attachment is made through 6.3 mm flat pin terminals.Intended for 12V or 24V systems.Larger switch panels with volt/amp measuring devices and nav. light monitoring available by request. Accessory: Series terminals with attachment terminals on a DIN rail.
Blank panels for covering larger cut-outs and individual panels. Plastic coated aluminium board with 4 mounting holes.
Blank panels for covering larger cut-outs and individual panels. Plastic coated aluminium board with 4 mounting holes.
These circuit breakers are ready-wired switch panels, equipped with a proven thermal circuit breaker from the German manufacturer ETA, type 1140 8 amp.The aluminum circuit boards are black coated, a labeling sheet with 170 punched vinyl labels is included.Without switch. Control through green light diodes.The attachment is made through 6.3 mm flat pin terminals.Intended for 12V or 24V systems.Larger switch panels with volt/amp measuring devices and nav. light monitoring available by request. Accessory: Series terminals with attachment terminals on a DIN rail.
These circuit breakers are ready-wired switch panels, equipped with a proven thermal circuit breaker from the German manufacturer ETA, type 1140 8 amp.The aluminum circuit boards are black coated, a labeling sheet with 170 punched vinyl labels is included.Switching function through rocker switches, control through green light diodes.The attachment is made through 6.3 mm flat pin terminals.Intended for 12 V or 24 V systems.Larger switch panels with volt/amp measuring devices and nav. light monitoring available by request.Accessory: Series terminals with attachment terminals on a DIN rail serve to create clear attachment of the conduits and the switch panels.
These circuit breakers are ready-wired switch panels, equipped with a proven thermal circuit breaker from the German manufacturer ETA, type 1140 8 amp.The aluminum circuit boards are black coated, a sheet with 170 punched vinyl labels is included.Coplete with socket or with socket and USB-socket . Switching with rocker switches. Control with green light diodes.The attachment is made through 6.3 mm flat pin lights.Intended for 12 V or 24 V systems.Larger switch panels with volt/amp measuring devices and navigation light monitoring available by request.Accessory: Series terminals with attachment terminals on a DIN rail serve to create clear attachment of the conduits and the switch panels.The negative poles are bridged as a busbar.
Original stickers for PHILIPPI circuit distribution panels and switchboards. The stickers fit exactly into the designated frames on the panel and are self-adhesive. A total of 204 labels on three vinyl backing sheets should cover just about every need for labeling a fuse or circuit on board a yacht or ship. Language: German.Upon request, the sets can also be ordered in English, Dutch, Danish, Spanish, French, or Polish.
