- Rigg & sail
- Rope & cordage
- Anchoring & mooring
- Hull & deck
- Cabin & comfort
- Paint & boatbuilding
-
Electrics & engine
- Batteries & accessories
- Onboard monitoring
- Onboard power systems
- Cables & accessories
- Network & NMEA2000
- Battery chargers
- Inverters & voltage converters
- Wind chargers, solar panels & fuel cells
- Electric engines
- Engine control & push pull cables
- Engine cooling & exhaust system
- Accessories for engines
- Fuel system
- Pumps & sanitation
- Safety & VHF radio
- Navigation & books
- Commercial shipping
The TCS tank monitor is a compact monitoring unit, ideal for yachts or vehicles with up to three tanks. It shows both the fill levels of the tanks and the voltages of two battery groups at a glance - so you can keep an eye on important values at all times. Thanks to the touch color display and automatic brightness adjustment, the device is easy to read even at night or in difficult lighting conditions.
Philippi stands for high-quality on-board electronics with maritime experience - the TCS tank monitor was specially developed for demanding marine environments. It combines technical precision with suitability for everyday use: whether you are on a relaxed sailing trip or a demanding voyage - you know what you need to know. And because a good display isn't everything: the workmanship and selection of components meet the high standards you can expect from Philippi products.
Brief technical information
- Display: 2.4″ TFT color touchscreen with brightness sensor
- Monitoring: up to 3 tanks and 2 battery groups
- Connection options: tank sensors from the TGT/TGW, UTV, TDS/TDN/TDT series; alternatively external sensors with 10-180 / 240-33 Ohm, 0-3 V or 4-20 mA signals
- Power supply: 12 V or 24 V DC
- Current consumption: max. 50 mA at 12 V, standby 6 mA
- Housing dimensions: W 105 × H 75 × D 28 mm
- Installation cut-out: W 87 × H 65 mm
- Weight: approx. 0.295 kg
- Manufacturer article no.: 071003041
Warnings
- Have the device installed by qualified personnel only.
- Before installation, ensure that the supply voltage is selected correctly (12 V / 24 V).
- Only connect suitable tank sensors and signals - incorrect values can lead to incorrect readings.
- Protect the device from moisture and direct exposure to splash water.
- Switch off the mains voltage when not in use or during long periods of storage.
€179.00
Prices incl. VAT plus shipping costs
Description
The TCS tank monitor is a compact monitoring unit, ideal for yachts or vehicles with up to three tanks. It shows both the fill levels of the tanks and the voltages of two battery groups at a glance - so you can keep an eye on important values at all times. Thanks to the touch color display and automatic brightness adjustment, the device is easy to read even at night or in difficult lighting conditions.
Philippi stands for high-quality on-board electronics with maritime experience - the TCS tank monitor was specially developed for demanding marine environments. It combines technical precision with suitability for everyday use: whether you are on a relaxed sailing trip or a demanding voyage - you know what you need to know. And because a good display isn't everything: the workmanship and selection of components meet the high standards you can expect from Philippi products.
Brief technical information
- Display: 2.4″ TFT color touchscreen with brightness sensor
- Monitoring: up to 3 tanks and 2 battery groups
- Connection options: tank sensors from the TGT/TGW, UTV, TDS/TDN/TDT series; alternatively external sensors with 10-180 / 240-33 Ohm, 0-3 V or 4-20 mA signals
- Power supply: 12 V or 24 V DC
- Current consumption: max. 50 mA at 12 V, standby 6 mA
- Housing dimensions: W 105 × H 75 × D 28 mm
- Installation cut-out: W 87 × H 65 mm
- Weight: approx. 0.295 kg
- Manufacturer article no.: 071003041
Warnings
- Have the device installed by qualified personnel only.
- Before installation, ensure that the supply voltage is selected correctly (12 V / 24 V).
- Only connect suitable tank sensors and signals - incorrect values can lead to incorrect readings.
- Protect the device from moisture and direct exposure to splash water.
- Switch off the mains voltage when not in use or during long periods of storage.
Downloads
Mechanical tank sensor TGT for diesel and wastewater tanks. Works with the tank gauges of the TUROTEST instrument series. The stainless steel tube sensors are a German product.High resolution (a switching point every 17mm).5 (empty) to 180 (full) ohms.Thread 1.1/4".Comes with a plastic flange and gasket.Lengths of up to 800mm are available on request.
Mechanical tank sensor TGW for fresh water.For gauges of TUROTEST series. The stainless steel tube sensors are made in Germany.High resolution (a switch point every 17mm), thread 1 1/4".5 (empty) to 180 (full) ohms.Comes with mounting flange and gasket.
Very reliable tank sensors for grey and black waters.Measurement of the fill level is carried out contact less with the help of a swimmer with a ring magnet on reed contacts. The electronics are sealed and therefore absolutely unsusceptible.Mounting is done with a 1 1/4" BSP thread and fitting adapters. Hence the sensors are simple to dismount and clean.
Very reliable tank sensors for water and fuels.Measurement of the fill level is carried out contact less with the help of a swimmer with a ring magnet on reed contacts. The electronics are sealed and therefore absolutely unsusceptible.Mounting is done with a 1 1/4" BSP thread and fitting adapters. Hence the sensors are simple to dismount and clean. Additional lengths of up to 1200mm are available upon request.
Non-contact tank sensor for ultrasonic tank gauge. For water, diesel, grey water or waste tanks. The use of ultrasonic technology means that there are no moving parts required in the tank.Works perfectly in plastic tanks. Not suitable for metal tanks.The sender is mounted in top of the tank (bolt circle diameter of 53 mm per SAE with 5 holes) and can even replace a mechanic sensor (with appropiate gauge). Sensors are available for tank depths up to 800 mm.The distance washer has a height of 25 mm; the height can be varied by using several washers.Voltage 10-30 volts,Power draw 50 mA,Output signal 0.5 - 2.5 volts.The matching gauges please find listed at "Suitable items" below.
This Power Management Panel (STERLING PMP1) is a combined instrument including 4 voltmeters, 4 amp meters and one amp hour counter: The amp hours of one battery bank (generally the main domestic bank) are measured and displayed like tank contents (charging current minus consumption).At three other measuring points (which require additional shunts which must be ordered separately) you may measure current (amps) and voltage (V). Indicators: Ampere hours (1x), Current (amps) (4x), Voltage (V) (4x). LCD display.For 9 - 33 V systems.Comes with 1 shunt for one measuring point. Optional accessoires: Further shunts for additional measuring points.
This battery-"tank gauge" surveys the charging condition of one battery bank and calculates the remaining capacity (taking in account the battery condition and temperature). Displayed are: - battery voltage,- charging current,- consumed Amp hrs,- remaining battery capacity,- current consumption,- charge status,- programmable visual and audible alarms,- programmable relays to start a generator in case of a voltage drop, for instanceEasy installation: only the 500 A shunt is to be installed in the battery cable (as close to the battery as possible) and to be connected to the display with the included RJ12 cable (length 10m).The unit is programmed using the quick installation menu.BMV-700: monitor for one battery. Simple calibration with the quick installation menu.BMV-702: like BMV-700, but with the possibility to show the voltage of a second battery.BMV-712: SMART version. An integrated Bluetooth module enables the programming, the readout and the interconnectedness as well as the definition of alarms by smartphone or tablet with the VICTR ON Bluetooth App. It has the same functions as BMV-702.The display comes complete with 500A shunt and RJ22 cable (length 10m). High current measurement resolution: 10 mA.Low current consumption: 2,9Ah per month at 12 V (with constant use).Wide input voltage range: 9,5 - 95 V. Mounting either directly (D: 63mm) or using the supplied cover (69 x 69mm).
The PHILIPPI VTM 2 Tank Monitor is an onboard monitoring device that displays up to four tank levels and two battery voltages. The readings are displayed on a 3.5-inch TFT color touchscreen. The monitor supports PHILIPPI tank sensors as well as compatible sensors from other manufacturers with resistance, voltage, or current outputs. For each tank, the volume, tank type, and sensor type can be configured; adjustment for non-linear tank geometries is also possible.Alarm thresholds can be set for tank levels and battery voltages. If these thresholds are exceeded or not met, an audible alarm sounds that can be acknowledged. Additionally, a potential-free relay output with a configurable function is available. A brightness sensor automatically adjusts the display brightness in low-light conditions. The tank sensors are polled at regular intervals; when the voltage drops below 11.5 V or 23 V, the device automatically switches to power-save mode.FeaturesDisplay of up to four tanks and two battery voltages3.5-inch TFT color touchscreen with ambient light sensorCompatible with pressure probes, float sensors, ultrasonic sensors, and flow sensorsCompatible with PHILIPPI tank sensors TGT/TGW, UTV, and TDS/TDN/TDTSupports third-party sensors with 10–180 ohms, 240–33 ohms, 0–3 (10) V, or 4–20 mACustomizable tank level display configuration, even for non-linear tank geometriesConfigurable dry-contact relay outputAudible alarm for adjustable tank and battery voltage thresholdsNo NMEA-2000 interfaceTechnical SpecificationsRated voltage: 12 / 24 VCurrent consumption: maximum 80 mA at 12 VStandby current consumption: 14 mADimensions: 105 x 105 x 35 mm (W x H x D)Mounting cutout: 88 x 88 mm (W x H)
Easy-to-use battery tank monitor with touch colour display.Battery monitoring: current voltage, charge or discharge current, remaining time, temperature and state of charge of the consumer battery (optional shunt required). Historical values on the number of charging cycles, deep discharges and average depth of discharge provide an overview of the battery's use. The voltage of two other batteries can be monitored.The optional digital battery shunt SHE348 is installed in the negative lead of the consumer battery. With the SHP348 shunt, further current measurement for charging sources (solar) is possible. Both shunts are supplied with power via the voltage measurement line of the connected consumer battery. The shunts are suitable for continuous charging or discharging currents up to 300 A and battery capacities up to 1000 Ah.Tank monitoring: The fill levels of up to four tanks can be monitored. The threshold values for alarms and the tank geometry can be configured. Suitable for tank sensors TGT/TGW, UTV, TDS/TDN or input signal ranges 10-180 Ohm/240-33 Ohm/0-5 V/0-10 V/4-20 mA.Chargers of the PHILIPPI ACE series with ACE-LIN interface can be integrated and thus values for the charging process can be displayed.The integrated NMEA2000 interface allows the battery and tank data to be integrated into the on-board network (optional N2K cable 4378-015 required).Operating voltage 12-48V DC.
Intelligent battery monitor shunt that works without a built-in additional display by allowing the data to be viewed via the Victron Connect app on the smartphone. The shunt has a Bluetooth module that is connected to the free VICTRON app installed on the smartphone.It is compatible with any battery type, suitable for up to 500 A, protected to IP 65 and can be easily retrofitted without complicated cabling. By measuring voltage and current, it calculates the battery's state of charge and remaining runtime. Alternatively, it functions as a DC measuring device and monitors the inverter input or consumers such as refrigerators and pumps. The device can be connected to other Victron technology via a VE port. It can also be used to set thresholds for a battery alarm on the smartphone.An AUX port enables the connection of a temperature sensor. The scope of delivery includes two red + cables with 1A fuse. VE.Smart Networking supports wireless data sharing with other Victron devices to improve charging efficiency.
To make the panels complete, there is the voltmeter with switch over for service- und starter battery available.
