Cables & accessories

3-wire cable (3 x 0.75 sq.mm), round braided with hemp-colored synthetic rope, well suited for hanging lamps.

Single-wire cable for engine or batterie installation, with plastic (pvc) coating.Typ: H07V-K.Colour: black or red. We supply by the metre or whole coils of 50 m. To obtain the attractive graduated price, please order a length of 50 m or a multiple of this length.

Single-wire cable for general usage with plastic (pvc) coating.Typ: H07V-K.Colour: black or red. We supply by the metre or whole coils of 100 m. To obtain the attractive graduated price, please order a length of 100 m or a multiple of this length.

Two-core cable with plastic cover (PVC) and core insulation. The flexible cable with fine-stranded copper cores is suitable for general use below deck, e.g. as a connecting or control cable.Type: H05VV-F.Color: black.We also supply whole rolls of 100 m at a favorable graduated price.To get the favorable graduated price, please order a number of meters divisible by 100.

Two or three strands of flexible rubber cable with fine stranded copper wires. The robust rubber hose cable is well suited for cabling outdoors, on deck or on the mast.Type: H07RN-F Color: black.We also supply whole rolls of 100 m (item no. 2213-115) or 50 m at a graduated price. To get the favorable graduated price, please order a number of meters divisible by 100 or 50.

Single-wire cable for batterie installation, with rubber coating. Extra flexible and oil resistant.Typ: H01N2-DColour: black. We supply by the metre or whole coils of 50 m. To obtain the attractive graduated price, please order a length of 50 m or a multiple of this length.

Three-core cable with bare copper wires with rubber cover. The wires are stranded and also insulated with rubber. Well suited for connecting electrical appliances such as soldering irons, drills, kitchen appliances, vacuum cleaners, etc.Specifications:Type H05RR-FNorm VDE 282-4Nominal voltage 300/500 Vinsulating/sheath material EPR/EPRflame resistance DIN EN 50265-2-1Color blackcopper base 150We also supply whole rolls of 50 m at a graduated price. To get the favorable graduated price, please order a number of meters divisible by 50.

Strong, thick walled, very robust gooseneck. May be used as cable fairlead or as ventilation.Made from cast sturdy bronze,tumbled with matte finish.

Brass cord through-hull, with rubber O-ring sealant.Available for various cord diameters.Polished or chromed brass finish.

Watertight cord through-hull of stainless steel and chromed brass.The deck through-hull allows the plug to go through along with the cable, so that a seperation in the deck area is not necessary. Good solution for antenna and radar cables, for example.Comes complete with deck seal, screws and blind plug.

Cable outlet made from plastic, resistant against corrosion, moisture and sea water.Utilising an O ring gasket seal this cable feed through functions as strain relief and at the same time as seal.

Stainless-steel bent pipe for running cable.Welded-on footplate with 3 holes.

The SCANSTRUT deck bushing made of light grey plastic can be easily removed from the deck thanks to its low installation height. The cables can be routed watertight into the interior of the boat together with the fitted plug. The scope of delivery includes prefabricated seals for various cable diameters and a self-drilling seal for several cables or any cable diameter.

The SCANSTRUT stainless steel deck bushing can be easily removed from the deck thanks to its low installation height. The cables can be routed watertight into the interior of the boat together with the mounted plug.The scope of delivery includes prefabricated seals for various cable diameters and a self-drilling seal for several cables or any cable diameter.

Innovative deck cable gland from Sweden, suitable for cable bundles in the mast/deck area: The cable connections are made below deck and sealed in a polyamide socket with sealing compound (please order separately). The cable connections can then be fed through the brass deck bushing complete with the plugs without having to be disconnected. The socket is reliably sealed with an O-ring. The connection is watertight and crush-proof. The cables are particularly well protected against damage by a plastic cable sock.

Small cable clamp made from 1,5mm stainless steel sheet. For 10mm cable.

Practical assortment of 430 isolated wire end ferrule, in five sizes.Dispenser box with rotating top for practical removal.For wire diameters 0.75/1.5/2.5/4.0/6.0mm².Refill bags of 100 of any size are available.

196-piece set of shrink tubing with a shrink ratio of 2:1 with 6 different sizes.Sizes range from 2.0 to 12.0 mm. Multiple designs in a practical plastic box.Colour: black.

Tubular cable lugs for crimping or soldering.Material E-Cu tube with galvanically tinned surface.

Grey plastic box with rubber cable entries and strip terminals.

Black heat shrink tubing with a shrink ratio of 2:1 sold by the metre.

Heat shrinkable tubing, coated inside with hot melt adhesive, halogen-free.Supplied in whole lengths of 1.20 m.Color: black.Application range: -55°C to +125°C.

Self-vulcanising sealing tape that becomes completely watertight when stretched.Particularly versatile in the deck area and for insulation.ROTUNDA vulcanising tape can be used to reliably seal the mast collar (mast sleeve), for example. Tightly applied, the tape welds itself immediately. To remove it, simply cut into it and it can be removed quickly, easily and without any annoying fiddling with adhesive residue.The tape has also proved to be a good choice for taping off saling cams or securing cotter pins.

An assortment of wire connectors and terminals. 175 pieces in a transparent compartmentalized box.

Cable shoe with eyelet and plastic coating in different sizes and colours.Shipping in sets of 10 or 100.

Flat cable shoe with plastic coating in different colours.Shipping in sets of 10 or 100.

Cable shoe with receptacle and partial plastic coating, full coating or with V-connection. Different colours for different currents.Come in sets of 10 or 100 pcs.

Cable shoe joint connector with plastic coating in different colours.Shipping in sets of 10 or 100.

Black plastic box with rubber cable entries and strip terminals.The box can also be employed for visible distribution box on classic boats.

A set to make cable connections that are simple to separate (mast installations, equipment circuits) up to 2,5 sq. mm.The 12 connections can be shortened according to demand. Shipping with core end sleeves (1 sq. mm), contraceptive coil and cable retainers. The contact elements are made from galvanized brass, the screws are from stainless steel.

Copper cable terminal.Professional cable attachment that doesn't need to be squeezed, or soldered.For cable diameters of 10mm² to 90mm².

Basic pipe clamp from stainless steel for mounting.

Basic pipe clamp from stainless steel for fitting.

Two part pipe clamp from stainless steel for fitting with two scews, washers and nuts

Cable shoe with fork and plastic coating in different sizes and colours.Shipping in sets of 10 or 100.

Mechanical professional tool for professional crimping of tubular cable lugs and connectors. Rotatable profile discs are used to select the required cross-section.

Proven all-rounder for decades, suitable for a wide range of applications in the workshop, on the house or on the boat. CARAMBA Multi-Oil combines the effectiveness of a rust remover, lubricant, corrosion protection, contact spray and cleaner in one product.The oil can be applied in doses in the practical spray can. It is silicone-free, does not resinify and is also compatible for the application on most plastics and rubber materials.Contents: 300 ml spray

Electrical and electronic components are often exposed to moisture on board, e.g. vapors, humidity, condensation, spray water, fog or rain. Liqui-Tech NAUTIC Spray reliably protects electrics and electronics from moisture-related failure, corrosion, oxidation and rust.Properties:infiltrates moisture and humidity 100 %leaves a permanent protective filmPreserves the electrical conductivity of treated partsas an insulating spray, prevents leakage currents and short circuitselectric current only flows where it is supposed to flowdoes not attack commercially available materialsdoes not damage windings or insulating paintsalso suitable for moving partsThe spray can be used directly when wet and remains fully effective at temperatures between +130°C and -80°C. Can be easily removed without leaving any residue (e.g. with brake cleaner).Application: Shake can well, spray on from a distance of 20-30 cm, wipe off residues with a dry cloth. Allow to act for at least 1 hour before use. Only use on devices that are not live - pull out the mains plug. Contents: 200g spray

Professional tool for crimping insulated cable shoes, flat-pin terminals, circular plugs, etc.Crimping area: red (1.5mm²), blue (2.5mm²) and yellow (6mm²).Pliers with adapter and pressure-moment setting, which combine reliable pressure with uniform contact pressure.

For crimping wire end fittings up to 2.5mm²Crimps in a trapezoidal shape for a secure connection between sleeve and conductor.Vanadium steel teeth with insulated handle.

Polyamide pliers for precise, automatic stripping up to 4mm².Characteristics:no adjustment required,hardened blades,integral wire cutters for wire up to 2mm²,knife with hook for stripping,yellow plastic handle.