Skip to main content


Toothed chain wheel, made from solid gray cast iron.
Undrilled design for short-link DIN 766 chain.
Raw iron construction.

The stated measures can differ

Description

Toothed chain wheel, made from solid gray cast iron.
Undrilled design for short-link DIN 766 chain.
Raw iron construction.

The stated measures can differ

More products from the category Accessories for winches

Cast steel chain wheel
Toothed chain wheel, made from solid gray cast iron.Undrilled design for short-link DIN 766 chain.Raw iron construction.The stated measures can differ

From €180.00 *
Crank wheel
Heavy crank wheel with curved spokes, as found on the windlasses of many flat-bottomed ships.The crank wheel is made of untreated cast iron, undrilled and cast-grey. It must therefore be reworked according to your own requirements.We can also supply the crank wheel with a larger diameter (45 cm / 60 cm). Please ask us about this.

From €130.00 *
LOFRANS Circuit Breaker
The thermal circuit breaker protects the electric motor of the Lofrans windlass from overloads.For the Lofrans Tigres windlass, the 100A circuit breaker is recommended for the 12 volt version and the 70A circuit breaker for the 24 volt version.For other Lofrans windlasses you can look up the necessary circuit breaker in the manual (under "Downloads & Information" at the bottom of the page).

From €66.00 *
LOFRANS control panel for electric windlass
The LOFRANS control panel type L is suitable for console installation. The buttons for raising and lowering can be used to operate a LOFRANS electric windlass.Installation depth: at least 28 mm

From €24.50 *
LOFRANS Cr spare chain wheel / gypsy
Gypsy for LOFRANS windlasses.The chain sprocket fits the horizontal LOFRANS anchor winch models:RoyalTigresCaymanKobraFor chains according to DIN 766 or ISO4565 dimensions (see table).

From €175.00 *
LOFRANS Foot Switch Up (red) or Down (black)
Lofrans foot switches are ideal for mounting on deck. A stainless steel protective cap prevents accidental operation. The foot switches are available as Up (red) or Down (black) version.Material: stainless steelDimensions: 80 x 95 x 20 mmOperating voltage: 12 / 24V DCMax. Current: 5 AmpereWaterproof according to IP67Operating temperature: -10 to +60 °CWeight: 250 g

From €73.99 *
LOFRANS Hand-held Remote Control THETIS 1002
THETIS 1002 cable remote control for the LOFRANS TIGRES anchor winch.The housing is non-slip and allows the winch to be operated safely even when wet. The plug and socket are waterproof to IP67. The flexible cable can be pulled up to a length of four metres. Power supply: 10 - 30 V DCCurrent consumption in operation: 15 mA (12 V)Operating temperature: -10 - 60 °CProtection class: IP67Dimensions: 154 x 59 x 38 mmWeight: 120 g

€73.99 *
LOFRANS THETIS 7003 Radio remote control / chain counter
LOFRANS THETIS 7003 radio remote control / chain counter for the LOFRANS TIGRES anchor winch.The housing is non-slip and allows the winch to be operated safely even when wet. The remote control is waterproof to IP67. See table below for dimensions.There are two switches for up and down. The application speed, the applied chain length and the tension are shown on the LED display. The menu languages available are German, English, Italian, French and Spanish.Technical dataVoltage: 12 - 24 V DCMax. Switching current at the output of the receiver: 2AOperating temperature: -10 - 60 °CProtection class: IP67Scope of deliveryRadio remote controlWall bracketReceiver boxUSB charging cable (without plug for 230 V)Magnetic sensor and bracketMagnet for chain nut

€319.00 *
QUICK PRINCE windlass accessories
Accessories for the QUICK PRINCE windlasses.Foot switch for lowering and retrieving the anchor.Wired remote control with non-slip housing. The flexible cable has a length of up to 4 meters. The plug and socket are waterproof to IP67.Power supply: 10 - 30 V DCCurrent consumption in operation: 15 mA (12 V)Operating temperature: -10 - 60 °CProtection class: IP67Dimensions: 154 x 59 x 38 mmWeight: 120 g

From €24.95 *
Turning handle for hand windlass
Ball bearing handle for windlass hand wheels or cranks. The handle is made of polished aluminum, the axle is made of galvanized steel. The M12 thread is 20 mm long.

€64.00 *

Zuletzt angesehene Artikel