- Rigg & sail
- Rope & cordage
- Anchoring & mooring
- Hull & deck
- Cabin & comfort
- Paint & boatbuilding
-
Electrics & engine
- Batteries & accessories
- Onboard monitoring
- Onboard power systems
- Cables & accessories
- Network & NMEA2000
- Battery chargers
- Inverters & voltage converters
- Wind chargers, solar panels & fuel cells
- Electric engines
- Engine control & push pull cables
- Engine cooling & exhaust system
- Accessories for engines
- Fuel system
- Pumps & sanitation
- Safety & VHF radio
- Navigation & books
- Commercial shipping













from €129.00*
€129.00*
Prices incl. VAT plus shipping costs
Available, delivery time: 1 - 0 Tage
In stock
PS125 with one outlet, the other models with two (or three at PSP12203) equal outlets for several battery banks. The isolated outputs can be coupled to charge 24 V (36V with PSP12203) batteries.
Switch-mode technology allows compact dimensions and light weight.
Load characteristics (3-step IUoU) for lead-acid, gel cell or AGM batteries.
PS125 and PS1255 for lead-acid and gel batteries only, charge voltage 14,4/28,8V).
Watertight moulded plug and charging cords (L=150cm), come with terminal crimpers and fuses.
Power factor correction PFC on PSP models.
Compact unit for use under severest operating conditions, salt water proof.
- Input voltage 200 - 250V, 45-55Hz
- Protected against overheating
- Reverse-polarity and short cut protection
- Power factor correction on PFC models
- Parallel wiring of multiple units is possible (doubling the capacity)
- Watertight (IP68), salt-water tested
- Strong moulded plastic/metal housing.
Art. No. | model | description | voltage (V) | charge (A) | terminals | L (mm) | B (mm) | H (mm) | weight (kg) | Price (unit) | Delivery time | Note list | Buy |
---|
Downloads
PS125 with one outlet, the other models with two (or three at PSP12203) equal outlets for several battery banks. The isolated outputs can be coupled to charge 24 V (36V with PSP12203) batteries.
Switch-mode technology allows compact dimensions and light weight.
Load characteristics (3-step IUoU) for lead-acid, gel cell or AGM batteries.
PS125 and PS1255 for lead-acid and gel batteries only, charge voltage 14,4/28,8V).
Watertight moulded plug and charging cords (L=150cm), come with terminal crimpers and fuses.
Power factor correction PFC on PSP models.
Compact unit for use under severest operating conditions, salt water proof.
- Input voltage 200 - 250V, 45-55Hz
- Protected against overheating
- Reverse-polarity and short cut protection
- Power factor correction on PFC models
- Parallel wiring of multiple units is possible (doubling the capacity)
- Watertight (IP68), salt-water tested
- Strong moulded plastic/metal housing.
Last seen products
More articles from this category