- Rigg & sail
- Rope & cordage
- Anchoring & mooring
- Hull & deck
-
Cabin & comfort
- Lamps, lights & lanterns
- Clocks, barometers & instruments
- Stoves & heaters
- Cooker, oven & barbecue
- Interior fittings
- Cabinet fittings
- Hinges & strap hinges
- Flush handles
- Locks
- Bolts & fasteners
- Hooks
- Clothing
- Life on board
- Store nets & bags
- Bags & duffel bags
- Cushions & mattress
- Maritime decoration
- Key rings
- Paint & boatbuilding
- Electrics & engine
- Pumps & sanitation
- Safety & VHF radio
- Navigation & books
- Commercial shipping
Heavy slide door fittings
The set is made up of:
Distinctive hanging tracks (top) with two hanging rollers with fittings and
a floor track (below) with two rollers, which can be installed on the bottom of the door.
Heavy design for doors up to 150 kg.
Top: Open box section 30 x 80 mm of hot-dip galvanized steel (4.5 kg) with brass
rollers Diameter = 65 mm, ball bearings, and brass fittings (1 kg) 50 x 155 mm.
Bottom: T-tracks 12 x 30 mm of stainless steel (2 kg) with rollers diameter = 30 mm and roller
fittings 37 x 64 mm (1,0 kg), chromed brass.
from €28.50*
€28.50
Prices incl. VAT plus shipping costs
| Art. No. | description | Price (unit) | Delivery time | Note list | Buy |
|---|
Description
We offer 6-piece fittings sets for the installation of sliding doors with a four cornered shaft of 8 mm and with 2 m long tracks.
The set is made up of:
Distinctive hanging tracks (top) with two hanging rollers with fittings and
a floor track (below) with two rollers, which can be installed on the bottom of the door.
Heavy design for doors up to 150 kg.
Top: Open box section 30 x 80 mm of hot-dip galvanized steel (4.5 kg) with brass
rollers Diameter = 65 mm, ball bearings, and brass fittings (1 kg) 50 x 155 mm.
Bottom: T-tracks 12 x 30 mm of stainless steel (2 kg) with rollers diameter = 30 mm and roller
fittings 37 x 64 mm (1,0 kg), chromed brass.
We offer 6-piece fittings sets for the installation of sliding doors with a four cornered shaft of 8 mm and with 2 m long tracks. The set is made up of: Distinctive hanging tracks (top) with two hanging rollers with fittings and a floor track (below) with two rollers, which can be installed on the bottom of the door. Heavy design for doors up to 150 kg. Top: Open box section 30 x 80 mm of hot-dip galvanized steel (4.5 kg) with brass rollers Diameter = 65 mm, ball bearings, and brass fittings (1 kg) 50 x 155 mm. Bottom: T-tracks 12 x 30 mm of stainless steel (2 kg) with rollers diameter = 30 mm and roller fittings 37 x 64 mm (1,0 kg), chromed brass.
We offer 6-piece fittings sets for the installation of sliding doors with a four cornered shaft of 8 mm and with 2 m long tracks. The set is made up of:Distinctive hanging tracks (top) with two hanging rollers with fittings and a floor track (below) with two rollers, which can be installed on the bottom of the door. Light design for doors up to 30 kg. Top: Open box section 15 x 45 mm of stainless steel (1.8 kg). Stainless-steel fitting 60 x 70 mm with plastic rollers diameter = 40 mm. Bottom: L-tracks 11 x 12 mm of stainless steel (0.9 kg) with rollers diameter = 17 mm and chromed brass roller fittings 15 x 39 mm.
