To be able to use the full range of Shopware 6, we recommend activating Javascript in your browser.

4730-110 ENO/FORCE 10 Drehknopf für Gasbrenner P/N F89248

4730-110 ENO/FORCE 10 Drehknopf für Gasbrenner P/N F89248

4730-110 ENO/FORCE 10 Drehknopf für Gasbrenner P/N F89248

4730-110 ENO/FORCE 10 Drehknopf für Gasbrenner P/N F89248

FORCE 10 - Control knob for gas burner

Art. No.: 4730-110

ENO No. F89248
Gas burner control knob for FORCE 10 stoves. 3-part, consisting of base plate, stainless steel spring and rotary knob. Outer diameter of the base plate 46 mm.

€23.90*

net: €20.08

Prices incl. VAT plus shipping costs

Coming soon

pcs

Description

ENO No. F89248
Gas burner control knob for FORCE 10 stoves. 3-part, consisting of base plate, stainless steel spring and rotary knob. Outer diameter of the base plate 46 mm.

Questions about the product?

Questions about the product?

Talk to craftsmen, boat builders and sailors. We understand your questions and provide the right answers.

Contact experts

More Products from Category Spare parts for gas cookers and stoves

ENO / FORCE 10 - Burner cap small

ENO / FORCE 10 - Burner cap small

ENO No. 60031 Burner cap for small burners, outer diameter 50 mm. Top part of the SABAF 3 burners.The cap is positioned above the flame distributor and is locked in place by a rotating movement on two pins protruding from the stove surface. This fixation ensures that both the flame distributor and the burner cap remain attached to the burner and cannot come loose due to vibrations.

€18.90 *

ENO / FORCE 10 - Electronic ignition box, 6 connections

ENO / FORCE 10 - Electronic ignition box, 6 connections

ENO No. 72655 Electronic ignition box with 6 connections.The ENO / FORCE 10 high-voltage part for electric ignition is an original spare part for marine stoves and stoves. It reliably generates the necessary ignition spark and ensures the safe start-up of gas hobs on board. The compact design facilitates installation in existing ENO / FORCE 10 cooking systems.The robust construction is specially designed for use in a maritime environment and withstands the typical stresses at sea. Replacing this high-voltage part restores the full functionality of the ignition system and ensures the operational safety of your cooking appliances.

€72.90 *

ENO / FORCE 10 - Large burner cap

ENO / FORCE 10 - Large burner cap

ENO No. 60026 Burner cap for large burners, outer diameter 95 mm. Top part of the SABAF 3 burners.The cap is positioned above the flame distributor and is locked in place by a rotating movement on two pins protruding from the stove surface. This fixation ensures that both the flame distributor and the burner cap remain attached to the burner and cannot come loose due to vibrations.

€21.90 *

4730-118 ENO/FORCE 10 Brenner Unterteil groß P/N 60024 - Bild 1

ENO / FORCE 10 - Large burner cup

ENO no. 60024 Large burner cup for SABAF 3 burner, which will be installed in FORCE 10 stoves from 2012.The burner cups are supplied without nozzles and fixing pins for the two upper parts.The upper parts - burner cap and flame distributor - are fixed to the pins protruding from the hearth surface of the burner cup. This means that the parts do not come loose even if the boat moves or is shaken.

€42.90 *

ENO / FORCE 10 - Large Flame Spreader

ENO / FORCE 10 - Large Flame Spreader

ENO No. 60025 Flame spreader made of aluminum for large SABAF 3 burners, which will be installed in FORCE 10 stoves from 2012.The burner cap is locked in place by a rotating movement on two pins protruding from the stove surface, thus fixing both itself and the flame distributor to the burner. This means that the parts do not come loose even if the boat moves or is shaken.

€37.50 *

ENO / FORCE 10 - Pot holder left, L= 272 mm stainless steel

ENO / FORCE 10 - Pot holder left, L= 272 mm stainless steel

ENO No. 63624 Pot holder left, for ENO / FORCE 10, stoves and ranges, made of stainless steel. Total length without locking knob 272 mm. Suitable for GASCOGNE, OPEN SEA, THE ONE from 12/2006 and various current FORCE 10 models. The pot holder is fixed to the pot grate frame by screwing in the locking knob and can be moved back and forth as required by loosening it.Supplied without locking knob.

€21.90 *

4730-103 ENO/FORCE 10 Topfhalter links, Länge 227 mm P/N 63622 - Bild 1

ENO / FORCE 10 - Pot holder left, l=227 mm stainless steel

ENO No. 63622 Pot holder left, for ENO / FORCE 10, stoves and ranges, made of stainless steel. Total length without locking knob 227 mm. Suitable for GASCOGNE, OPEN SEA, THE ONE from 12/2006 and various FORCE 10 models. The pot holder is fixed to the pot grate frame by screwing in the handwheel and can be moved back and forth as required by loosening it.Supplied without locking knob.

€21.90 *

ENO / FORCE 10 - Pot holder right, l= 227 mm stainless steel

ENO / FORCE 10 - Pot holder right, l= 227 mm stainless steel

ENO No. 63623 Pot holder right, for ENO / FORCE 10, stoves and ranges, made of stainless steel. Total length without locking knob 227 mm. Suitable for GASCOGNE, OPEN SEA, THE ONE from 12/2006 and various FORCE 10 models. The pot holder is fixed to the pot grate frame by screwing in the handwheel and can be moved back and forth as required by loosening it.Supplied without locking knob.

€21.90 *

ENO / FORCE 10 - Pot holder right,L= 272 mm stainless steel

ENO / FORCE 10 - Pot holder right,L= 272 mm stainless steel

ENO No. 63625 Pot holder left, for ENO / FORCE 10, stoves and ranges, made of stainless steel. Total length without locking knob 272 mm. Suitable for GASCOGNE, OPEN SEA, THE ONE from 12/2006 and various FORCE 10 models. The pot holder is fixed to the pot grate frame by screwing in the handwheel and can be moved back and forth as required by loosening it.Supplied without locking knob.

€21.90 *

4730-183 Gummikappe für Feststellhebel P/N=71268

ENO / FORCE 10 - Rubber cap for locking lever

ENO No. 71268ENO/FORCE 10 rubber cap for locking lever of the gimbal lock.Suitable for all FORCE 10 stoves with gimbal mounting.

€4.50 *

4730-120 ENO/FORCE 10 Brenner Unterteil klein P/N 60028 - Bild 1

ENO / FORCE 10 - Small burner cup

ENO No. 60028 Lower part of the small SABAF 3 burner, which will be installed in FORCE 10 stoves from 2012.The upper parts - burner cap and flame distributor - are fixed to the pins protruding from the hearth surface of the lower part. This means that the parts do not come loose even if the boat moves or is shaken.

€34.90 *

ENO / FORCE 10 - Small Flame Spreader

ENO / FORCE 10 - Small Flame Spreader

ENO No. 60029 Flame distributor made of aluminum for small SABAF 3 burners, which will be installed in FORCE 10 stoves from 2012.The burner cap is locked in place by a rotating movement on two pins protruding from the stove surface and thus fixes both itself and the flame distributor to the burner. This means that the parts do not come loose even if the boat moves or is shaken.

€29.50 *

4730-182 Feder für Arretierstange P/N=63628

ENO / FORCE 10 - Spring for locking rod

ENO No. 63628Spring for the locking bar. 2 springs are required for each port lock.Suitable for all FORCE 10 stoves with cardanic suspension.Length 70 mmDiameter 8 mm

€3.50 *

ENO / FORCE 10 - Thermal sensor year 2012 - year 2020

ENO / FORCE 10 - Thermal sensor year 2012 - year 2020

ENO No. 60032 All FORCE 10 stoves are equipped with a thermal sensor and an electric ignition on each gas burner.The thermocouples are sensors that only allow gas to escape from the valve when the flame is burning. As soon as the flame goes out - for example due to a gust of wind or boiling pots - the thermal sensor cools down and the gas supply is interrupted immediately.When igniting a gas burner, it should be noted that the thermocouple must first reach a certain temperature before the gas supply is released. This is done by holding down the gas control button for the corresponding burner for approx. 20 seconds after ignition so that the thermosensor does not interrupt the gas supply.The thermal sensors of the top burners on the stoves have been further developed over the years.SABAF II gas burners were used from 2000 to 2012, after which the more advanced SABAF III burners were used.The SABAF II burners can be recognized by the fact that their burner caps are fixed with two screws.the following thermocouples were installed in the top burners of the FORCE 10 gas stoves:Year of manufacture 2000 - 2012 Thermal sensor ENO no. F89216 (TOPLICHT item no. 4730-108)Year of construction 2012 - 2020 Thermal sensor ENO no. 60032 (TOPLICHT item no. 4730-107)after year of construction 2020 Thermal sensor ENO no. 71673 (TOPLICHT item no. 4730-114)

€21.90 *

ENO / FORCE 10 - Thermocouple from 2020 onwards

ENO / FORCE 10 - Thermocouple from 2020 onwards

ENO No. 71673 All FORCE 10 stoves are equipped with a thermal sensor and an electric ignition on each gas burner.The thermocouples are sensors that only allow gas to escape from the valve when the flame is burning. As soon as the flame goes out - for example due to a gust of wind or boiling pots - the thermal sensor cools down and the gas supply is interrupted immediately.When igniting a gas burner, it should be noted that the thermocouple must first reach a certain temperature before the gas supply is released. This is done by holding down the gas control button for the corresponding burner for approx. 20 seconds after ignition so that the thermosensor does not interrupt the gas supply.The thermal sensors of the top burners on the stoves have been further developed over the years.SABAF II gas burners were used from 2000 to 2012, after which the more advanced SABAF III burners were used.The SABAF II burners can be recognized by the fact that their burner caps are fixed with two screws.the following thermocouples were installed in the top burners of the FORCE 10 gas stoves:Year of manufacture 2000 - 2012 Thermal sensor ENO no. F89216 (TOPLICHT item no. 4730-108)Year of construction 2012 - 2020 Thermal sensor ENO no. 60032 (TOPLICHT item no. 4730-107)after year of construction 2020 Thermal sensor ENO no. 71673 (TOPLICHT item no. 4730-114)

€26.90 *

ENO / FORCE 10 - Thermocouple year 2000 - year 2012

ENO / FORCE 10 - Thermocouple year 2000 - year 2012

ENO No. F89216 All FORCE 10 stoves are equipped with a thermal sensor and an electric ignition on each gas burner.The thermocouples are sensors that only allow gas to escape from the valve when the flame is burning. As soon as the flame goes out - for example due to a gust of wind or boiling pots - the thermal sensor cools down and the gas supply is interrupted immediately.When igniting a gas burner, it should be noted that the thermocouple must first reach a certain temperature before the gas supply is released. This is done by holding down the gas control button for the corresponding burner for approx. 20 seconds after ignition so that the thermosensor does not interrupt the gas supply.The thermal sensors of the top burners on the stoves have been further developed over the years.SABAF II gas burners were used from 2000 to 2012, after which the more advanced SABAF III burners were used.The SABAF II burners can be recognized by the fact that their burner caps are fixed with two screws.the following thermocouples were installed in the top burners of the FORCE 10 gas stoves:Year of manufacture 2000 - 2012 Thermal sensor ENO no. F89216 (TOPLICHT item no. 4730-108)Year of construction 2012 - 2020 Thermal sensor ENO no. 60032 (TOPLICHT item no. 4730-107)after year of construction 2020 Thermal sensor ENO no. 71673 (TOPLICHT item no. 4730-114)

€25.89 *

ENO / FORCE 10 - Thermostatic gas valve, oven+grill

ENO / FORCE 10 - Thermostatic gas valve, oven+grill

ENO No. 72137 Thermostatic gas valve for supplying gas to the oven and grill burner.This high-quality valve is a further development of the old model and improves performance and efficiency.It replaces the old model ENO No. 89214

€139.00 *

4721-131 ENO/FORCE 10 Batteriehalter für elektr. Zündung P/N 72647 - Bild 1

ENO / FORCE 10 battery holder for electric ignition

ENO No. 72647 Battery holder for holding an AA 1.5 volt battery to supply the ignition box of the ENO / FORCE 10 gas stoves with power and thus reliably and conveniently ignite the individual gas burners.

€27.90 *

ENO / FORCE 10 Hand knob for pot holder plastic

ENO / FORCE 10 Hand knob for pot holder plastic

ENO No. 55036 This black locking knob is suitable for ENO / FORCE 10 pot holders.The knob has a diameter of 34 mm and has an integrated 4 mm threaded screw.The pot holder is fixed by screwing the handwheel into the pot frame and can be moved back and forth by loosening it.

€21.90 *

ENO/FORCE 10 - Electronic ignition box 4 connections

ENO/FORCE 10 - Electronic ignition box 4 connections

ENO No. 72645 Electronic ignition box with 4 connections.The ENO / FORCE 10 high-voltage ignition part is a genuine spare component for marine stoves and cookers. It reliably generates the required ignition spark, ensuring safe operation of your onboard gas cooking systems. Its compact design allows for easy integration into existing ENO / FORCE 10 appliances.Built with a durable construction, it is specifically designed to withstand the demanding conditions at sea. Replacing this part restores full functionality of the ignition system and ensures the operational safety of your cooking equipment.

€69.00 *

4730-186 Führungsblech für Arretierstange P/N=30200

ENO/FORCE 10 Führungsblech für Arretierstange P/N=30200

ENO No. 30200ENO/FORCE 10 Guide plate for locking rod of the gimbal lock.3 guide plates are required for the gimbal lock.Suitable for all FORCE 10 ovens with cardanic suspension.

€8.50 *

Ersatzteile für die Arretiervorrichtung von FORCE 10 Herden mit kardanischer Aufhängung

ENO/FORCE 10 replacement locking device for NORTH AMERICAN m

ENO No. F305039 Cover plate ENO No. F305046Locking rodSpare parts for the locking device of the gimbal-mounted stoves of the North American models of FORCE 10.Available are the cover plate (total length 505 mm), the locking bar with lever (total length 520 mm), the guide plates for the locking bar, the springs for the locking bar and the rubber cap for the lever of the locking bar.The cover plate F305039 (total length 505 mm) and the locking bar with lever F305046 (total length 520 mm) are suitable for the following models:NORTH AMERICAN STANDARDModelF632512-burnerwith viewing window in the doorModelF6025112-burnerwithout viewing window in the doorModelF633513-burnerwith viewing window in the doorModelF603513-burnerwithout viewing window in the doorModelF634514-burnerwith viewing window in the doorModelF604514-burnerwithout viewing window in the doorNORTH AMERICAN COMPACTModelF632532-burnerwith viewing window in the doorModelF602532-burnerwithout viewing window in the doorModelF633533-burnerwith viewing window in the doorModelF634534-burnerwith viewing window in the doorYou can find the other spare parts for the gimbal lock, which are suitable for all FORCE 10 stoves, by tapping on the corresponding link:4730-182 Spring for locking rod P/N=636284730-183 Rubber cap for locking lever P/N=712684730-186 Guide plate for locking bar P/N=30200

From €29.50 *

Last seen products

Request sent successfully

Request wasn't send - a error occured. Please try again.