Carbon monoxide detectors from KIDDE, the world's leading manufacturer of smoke and CO detectors for the home.  With state-of-the-art, certified sensor technology in accordance with EN 50291:2010, an integrated 10-year power supply and a 10-year manufacturer's guarantee, KIDDE offers maximum safety in the event of carbon monoxide leaks.In the case of heating appliances that run on wood, coal, heating oil or gas, CO can escape into the room air if they are insufficiently maintained, improperly installed or if the flue is blocked. The life-threatening gas cannot be seen, smelled or tasted!The CO detector from KIDDE warns you with a loud alarm signal if carbon monoxide escapes. The alarm is triggered in relation to the measured CO concentration in the room air (in accordance with EN50291). This means: timely warning of CO concentrations that can lead to unconsciousness and death within a short time. Additional safety is provided by the X10-D model, which shows a CO concentration in the room air from 30 ppm on a digital display. A peak value memory ensures that a CO leak is reliably displayed even after a long period of absence

Relaxed, bendable copper pipe for simple installation.Outer diameter 8 mm.

Immediate warning in the case of leaking (propane, butane, methane).The calibrated sensor reacts long before a dangerous gas concentration occurs in the airWith loud warning sound (85 dB (A) / 3 m). Easy and flexible installation.Can also be used at home, thanks to the included 230 V mains socket transformer. With contol light and self test function.Power supply: 12 V DC (+/- 10%) mains adapter (supplied) or on board power supply 150 mA.Power consumption: 1,5 W (alarm); 1 W (standby).Consumption: max. 110 mA (12 V DC).Loudness: 85 dB (A) at 3 m distance.Operating temperature: - 10° to + 40° C.Dimensions: 75 x 75 x 28 mm.

Corrosion-resistant brand product GOK type EN61.Characteristics:EG prototype release approved after DGR,for connecting directly to a liquefied gas bottle up to 14 kg,PS 16 bar, flow rate: 0,8 kg/h / 1,5 kg/h,inlet KLF, outlet G¼"LH-KN, with PRV,optionally shipping with manometer.

This adapter allows the American Force 10 oven (or other gas appliances with 5/8" thread) to be connected to the European gas system. Connections: US female 5/8" thread to EU connection (8 mm tube socket).

Pressure regulator for propane / butane bottles.Outlet pressure 30 mb.Connections:Inlet: small-bottle attachment.Outlet: G1/4" left-threaded. Available:Standard pressure regulator, pressure regulator with release valve, pressure regulator with release valve and manometer.

Gas pressure controller for butane gas / liquefied gas installation.Reduces from 50mb to 30mb, thereby enabling you to use 30mb devices in 50mb installations.hookup:on both sides SR threaded connections of 8mm.

A convenient way for the secure cut-off of the LPG facility.The gas supply is shut off directly at the bottle comfortably and safely by the push of a button from the inside the cabin.This system is especially suited for the employment on boats, since the shutoff happens directly at the bottle at the connection of the pipe and the ingression of gas into the cabin can therefore be eliminated with a proper instalment.Shipment / installation:magnetic valve (to be installed between the gas hose and the gas pipe) with 1,4m cord, flush-mounted operating device (measurements: 80 x 65 x 20mm) with switch and LED. A surface-mounted frame is available as an accessory.Included:magnetic valve, inlet 1/4" left, cap nut, outlet 1/4" left, outer threads.Max. 1,0kg/h.For 12 V systems.Waterproof IP54.No power consumption when the vent is closed.This product is applicable for the operation and placement in a zone II (i.e. a bottle case) for a hazardous area according to the ATEX policy 94/9/EG.Notice: a permission is available for the TRUMA LPG remote switch only for caravans, mobile homes or site trailers at the present moment (12/2020). The manufacturer TRUMA has allowed the maritime permit to expire, with the result, that the user has to operate at his/her own responsibility or in consultation with an expert for the approval of an onboard LPG installation (details at www.truma.com).

Practical tool to connect the valve to the gas bottle without having to use too much force.Made from polyamide with GRP strengthening, colour blue.

Tube for LPG made from red orange rubber-coated fabric,fitted on both ends with pressed on brass connectors with crimp sleeves made from stainless steel.Length: 400 mm or 800 mm. Tested and approved medium pressure hose pipe for land and sea based LPGs.

Clever device for detecting even minor leakage in LPG gas systems.When pressing the red test button, bubbles will occur in the sight glass if there is any leak in the system.May be used in all low pressure systems up to 2 bar pressure.Type approved.

Leak tightness test fluid with DVGW approval (German Technical and Scientific Association for Gas and Water)Nontoxic, with corrosion protection , DIN standard DVGW (German Technical and Scientific Association for Gas and Water).Leak tightness test fluid for flow systems such as pipes and tubes, glass bottles and containers, pneumatic brake sytems. Soldering and welding connections.

LPG cylinder valve, M16x1,5 external screwthreads. Fits for the blue CAMPINGGAZ-bottles up to 3 kg.

For connection to Campingaz cylinders and gas cartridges with screw-on thread to regulate the pressure to the nominal pressure of the gas equipment.Characteristics:with shut-off valve,corrosion resistant in accordance with EN 16129, annex M,pressure relief valve PRV, response pressure 150 mbar, a discharge line can be installed on the pipe socket, (8 mm) to discharge the overpressure,EC type approval according to PED,Flow rate: 0,5 kg/h,maximum admissible pressure: PS 10 bar,Input: Campingaz bottles (M16 x 1,5),Outlet: G¼"LH.

Quick closing valve and distributor block to connect multiple gas loads on one gas bottle.The valves are made from brass and are equipped with compression type joints for 8mm copper tubing.

Air and gas proof container made from plastic with a large screw cap for safe storage of a CAMPINGAZ container R904 or R907 on small yachts.With a plastic pipe-to-hose fitting for a drain hose (Diameter = 19 mm) and a straight through-bulkhead threaded joint with 8 mm studs RST8 on both sides (cutting rings are not included).The container must be drained overboard.Outer diameter: 270 mm, inner diameter: 190 mm, height: 335 mm, weight: 1,72 kg. Colour: white with black cap. A sturdy strap fastening for the screw cap container and a gas pressure regulator is available separately.

A sturdy strap fastening for the scew cap container for a camping gas cartridge (Part Nr. 4711-101).