ULTRA Trip Hook chain catch hook made of A4 stainless

Strong classic fluke hook made from solid cast bronze of tumbled matt finish.

Strong, solid cast-bronze fitting to relieve strain on the anchor windlass.Mounts on deck.Dropping the flap stops the chain.

Chain hook, made from stainless steel (AISI 316).By its funnel shape, this chain stopper fixes the chain very safely, with no torsion.High strength, cast in one piece.

Chain stopper.AISI 316 (A4) stainless steel. To relieve the strain on the anchor windlass.The axle of the foldable flap is an easily removed fast pin. The chain can therefore be fitted into the stopper without problem.

An ingenious, simple, robust and absolutely durable fitting.The ideal chain stopper, made from solid polished cast plate stainless steel that distributes anchor load across two strops.Intended for all chains between 8 mm and 13 mm.The CHAIN GRABBER must be spliced to two strong lines onboard. After anchoring, the stopper is hooked into the chain from underneath and the lines are attached, which relieves the strain on the winch. The flap also holds the chain in the hawshole and on the stemhead.Drilled for 13 mm shackles.Comes without shackles and lines.

Chain hook.Made from polished brass.A practical helper, if your anchor hooks itself on someone else's chain or rode.Length: 120 mm.

Patented A4-stainless steel shackle that connects directly to a chain to relieve the strain on an anchor windlass or for similar uses.Bolt cannot be lost.

Claw hook made of A4 stainless steel round material, cleanly polished.A ring is welded to the hook.

The ULTRA MARINE TRIP HOOK chain catch hook is the ideal tool for releasing crossed anchor chains.In crowded anchor bays or (Mediterranean) ports, it can quickly happen that your own anchor is jammed by another anchor chain or vice versa. With the Ultra Marine Trip Hook, the jammed anchor can be released safely and in a controlled manner - without diving.The interfering chain is "caught" with the hook and lifted. After clearing the jammed anchor, the chain can be dropped again. To do this, the TRIP HOOK is lifted with a second line attached to the lower eye.The solid hook is also made of A4 stainless steel (316L). Stainless and robust, it is made for many years of use on board.The TRIP HOOK is available in the sizes small (UTH-S) and large (UTH-B) and is therefore suitable for yachts of all sizes.Technical featuresSmall (UTH-S) for 6/8 mm chainL x W: 213 x 156 mmT (material thickness): 12 mmWeight: 665 gLarge (UTH-B) for 10/13 mm chainL x W: 380 x 281 mmT (material thickness): 12 mmWeight: 2,500 g

Forged hook made of V4A stainless steel, which can be easily and safely hooked into the chain. The chain hook relieves the windlass and prevents chain noise.With spring-loaded safety pin.