Skip to main content


The IC-M410BB is a black box marine VHF radio with a remotely mountable control unit as the sole call station.

The waterproof (IPX7) HF unit IC-M410BB can be installed in a place where it will not interfere. All functions, including DSC operation, can be operated with the supplied COMMANDMIC HM-195B. Its cable length of 6.10 metres can be extended to a maximum of 18.30 metres. Two optional OPC-1541 extensions are required for this. You will find these (Article-No. 3938-154) further down on this page under "Accessories" at COMMANDMIC.

Install up to two stations on board, VHF radio available at your desired positions
Up to two COMMANDMIC remote controls can be connected to the IC-M410BB, providing access to the VHF radio and intercom functions. This makes it possible to transmit from two different positions on board. NMEA 2000 and NMEA 0183-HS enable data integration on board. The NMEA 2000 network provides plug-and-play data communication for connection to other marine devices, such as an MFD (multi-function display). The radio can send GNSS (GPS) position, DSC call and radio channel to other devices.

Active noise cancellation - no need to shout into your microphone
Active Noise Cancellation digitally removes background noise from both transmit and receive audio for clear communication, even in noisy maritime environments.

Built-in Class D DSC, "Distress" button can be a lifesaver in an emergency situation
With just one press of the "DISTRESS" button, the inbuilt DSC (Digital Selective Calling) system can digitally transmit distress information to the Coast Guard and/or other vessels. The DSC monitoring function continuously monitors the DSC channel (channel 70) for added safety and protection.

Loud one-way receiver loudspeaker megaphone for radio watch on deck or tower
A built-in 13-watt amplifier increases the audio output to an external call loudspeaker. The 1-way RX hailer function allows you to monitor radio traffic on deck via the loudspeaker megaphone. You can also play foghorn patterns via the loudspeaker megaphone.

Built-in GPS receiver
The built-in GPS receiver displays your current position, date/time and can be used for DSC calls. The GPS antenna supplied eliminates the need for time-consuming connection to other GPS data sources and allows you to flexibly select the location for a good reception signal.

Features:

  • NMEA-2000 and NMEA-0183-HS connectivity
  • AquaQuake draining function (HM-195B)
  • For 12 volt power supply
  • Waterproof according to IPX7 (30 minutes at a depth of 1 m)
  • Dual/triple channel guard for simultaneous monitoring of channel 16 and/or call channel
  • Anchor watch function
  • As the user, you can enter your MMSI into the device yourself after switching on the transceiver (once, in accordance with the applicable regulations)
  • Additional programming with an ATIS ID is possible after prior activation of this area by the dealer. Please ask us about this.

Scope of delivery:

  • HF unit IC-M410BB
  • One CommandMic HM-195GB with connection cable OPC-1540 (6.1 m)
  • GPS antenna
  • Power supply cable (DC cable 2 m)
  • Microphone suspension
  • Connection cap
  • Mounting bracket

You can find more technical details in the operating instructions (Bedienungsanleitung) as a pdf file further down on this page under "Downloads & Information".

Accessories

ICOM COMMANDMIC HM-195 remote control
The ICOM COMMANDMIC HM-195 is a 4th Generation remote-control microphone. A new look for total control of all communications and Class D DSC functions, as well as AIS and GPS functions (if the VHF system supports these features). It incorporates the new ICOM user interface. Features: - IPX7 Submersible rating, - Active Noise Canceller: Produces clear voice sound and supresses up to 90% of background sound when receiving or transmitting - Superior audio performance, - Complete control of all communications & Class D DSC functions (also AIS functions if the VHF system allows), AquaQuake Intercom function (with IC-M423 and IC-M506EURO). Size (W x H x D): 67.5 x 144.5 x 37 mm; Weight (without cables): 400 g. Comes complete with 1,50 m coiled cord and with 6,1 m connection cord. Connection may be extended to max. 18,3 m with two optional extension cords.The COMMANDMIC may be used with the ICOM VHF IC-M423, IC-M400BB and IC-M506EURO.Available in two designs: - HM-195B: amber coloured display; - HM-195GB: white display.

From €209.00 *

Similar products

ICOM IC-M400BBE black box VHF radio + CommandMic HM-195B
The IC-M400BBE is a black box VHF radio with a remotely mountable control unit as the sole call station.The waterproof (IPX7) HF unit IC-M400BBE can be installed in a place where it will not interfere. All functions (like the IC-M423), including DSC operation, can be operated with the supplied COMMANDMIC HM-195B. Its cable length of 6.10 metres can be extended to a maximum of 18.30 metres. Two optional OPC-1541 extensions are required for this. You will find these (Article-No. 3938-154) further down on this page under "Accessories" at COMMANDMIC.Intuitive user interfaceThe menu system corresponds to that of the latest ICOM models. The bottom line of the dot matrix display shows the functions of the softkeys, which can be selected using the left/right buttons.Active noise cancellerThe built-in bidirectional active noise canceller reduces background noise by up to 90%. This improves the intelligibility of transmitted speech and received signals.10 W AF power, megaphone and foghornThe IC-M400BBE has a built-in 10 W AF amplifier for a connectable external loudspeaker. This makes it possible to use the microphone as a megaphone or to sound a foghorn.Class D DSC built inThe built-in DSC monitoring function monitors the activity on channel 70 (DSC channel) even during reception on another channel, otherwise the usual DSC functions of this class are available to you.Built-in GPS receiverThe built-in GPS receiver displays your current position, date/time and can be used for DSC calls. The GPS antenna supplied eliminates the need for time-consuming connection to other GPS data sources and allows you to flexibly select the location for a good reception signal.Features:NMEA-0183 connectivityAquaQuake draining function (HM-195B)For 12 volt power supplyWaterproof according to IPX7 (30 minutes at a depth of 1 m)Dual/triple channel watch for simultaneous monitoring of channel 16 and/or call channelAs the user, you can enter your MMSI into the device yourself after switching on the transceiver (once, in accordance with applicable regulations)Additional programming with an ATIS ID is possible after prior activation of this area by the dealer. Please ask us about this.Scope of delivery:HF-Einheit IC-M400BBECommandMic HM-195BGPS antennaPower supply cableYou can find more technical details in the operating instructions (Bedienungsanleitung) as a pdf file further down on this page under "Downloads & Information".

€479.00 *
ICOM IC-M510BB black box VHF radio, AIS, HM-195GB
The IC-M510BB is a black box VHF marine radio with a remotely mountable control unit as the sole call station.The waterproof (IPX7) HF unit IC-M510BB can be installed in a place where it will not interfere. All functions, including DSC operation, can be operated with the supplied COMMANDMIC HM-195GB. Its cable length of 6.10 metres can be extended to a maximum of 18.30 metres. Two optional OPC-1541 extensions are required for this. You will find these (Article-No. 3938-154) further down on this page under "Accessories" for the COMMANDMIC.Install up to three stations on board, VHF radio available at your desired positions Up to three COMMANDMIC control units can be connected to the IC-M410BB, providing access to the VHF radio and the intercom functions. When using the intercom function, you can choose between a single call or an all-call. It is possible to transmit from up to three different positions on board. NMEA 2000 and NMEA 0183-HS enable data integration on board. The NMEA 2000 network provides plug-and-play data communication for connection to other marine devices, such as an MFD (multi-function display). The radio can send GNSS (GPS) position, DSC call, AIS signals and radio channel to other devices.The integrated AIS receiver monitors the movements of other vesselsThe integrated AIS receiver shows you ships in the immediate vicinity. You can set an alarm for "too close" approaches to avoid collisions. As the MMSI is part of the AIS data received, you can address a selected vessel directly via an individual DSC call.DSC remote control interface for PC console software (EN 300 338-8 compliant) The IC-M510BB has a special DSC remote control port (compatible with EN 300 338-8) that enables connection to PC console software or an external device. This allows you to centralise the control of emergency communication.Two-minute voice recording function for replaying the last call The voice recording function for the last call automatically saves up to two minutes of an incoming call. So you won't miss any more messages.Active noise cancellation - no need to shout into your microphoneActive noise cancellation digitally removes background noise from both the transmit and receive audio, ensuring clear communication even in noisy, maritime environments.Built-in Class D DSC, "Distress" button can be a lifesaver in an emergency situation With just one press of the "DISTRESS" button, the inbuilt DSC (Digital Selective Calling) system can digitally transmit distress information to the coastguard and/or other vessels. The DSC monitoring function continuously monitors the DSC channel (channel 70) for added safety and protection.Loud one-way receiver loudspeaker megaphone for radio watch on deck or tower A built-in 13-watt amplifier increases the audio output to an external call loudspeaker. The 1-way RX hailer function allows you to monitor radio traffic on deck via the loudspeaker megaphone. You can also play foghorn patterns via the loudspeaker megaphone.Built-in GPS receiverThe built-in GPS receiver displays your current position, date/time and can be used for DSC calls. The GPS antenna supplied eliminates the need for time-consuming connection to other GPS data sources and allows you to flexibly select the location for a good reception signal.Features:NMEA-2000 and NMEA-0183-HS connectivityAquaQuake training function (HM-195B)For 12 volt power supplyWaterproof according to IPX7 (30 minutes at a depth of 1 m)Dual/triple channel guard for simultaneous monitoring of channel 16 and/or call channelAnchor watch functionAs the user, you can enter your MMSI into the device yourself after switching on the transceiver (once, in accordance with applicable regulations)Additional programming with an ATIS ID is possible after prior activation of this area by the dealer. Please ask us about this.Scope of deliveryHF unit IC-M510BB with integrated GPS and AIS receiverOne CommandMic HM-195GB with connection cable OPC-1540 (6.1 m)GPS antennaPower supply cable (DC cable 2 m)Microphone suspensionConnection capMounting bracketYou can find more technical details in the operating instructions (Bedienungsanleitung) as a pdf file further down on this page under "Downloads & Information".

€989.00 *

Last seen products