Mixing tap

Simple water faucet from aluminium pipe with white plastic base.The faucet, capable to telescope, can be pushed in for storing and is twistable by 360° when fully extended.Without cut-off valve.Hose connection for 10 mm and 13 mm.

Simple water faucet from aluminium pipe with white plastic base and cut-off valve.The faucet, capable to telescope, can be pushed in for storing and is twistable by 360° when fully extended.Hose connection for 10 mm and 13 mm.

Simple water faucet from aluminium pipe with white plastic base and cut-off valve.To fold away: In case the faucet is no longer used, it can simply be tipped sideways. Also it is twistable by 360°.For mounting on vertical surfaces.Hose connection for 10 mm and 13 mm.

Sturdy tap, model Sigma RR4100, made of chrome-plated brass with a swivel and fold-down spout. Water flow is controlled via a lever with a ceramic 1/4-turn valve. Connection is via a 3/8″ BSP male thread. The total length of the BSP threaded shank is 34 mm.The tap is intended for connection to a single water line – suitable for cold or hot water, but not designed as a mixer. It is compatible with pressurized systems.The position of the lever on the valve pivot can be adjusted to suit the chosen installation. The swivel and fold-down spout also allows mounting inside the sink.You can find suitable hose connectors for 10 mm hose lines (item no. 1906-010) or 13 mm hose lines (item no. 1906-110) or Whale Quick-Connect fittings under Accessories. Technical specificationsMaterial: chrome-plated brassValve: ceramic, 1/4-turnSpout: swivel and fold-downMinimum folded height: 37 mm (ideal when the sink is to be covered)Connection: 3/8″ BSP male threadThreaded shank length: 34 mmSingle-line installation – no mixing functionSuitable for pressurized systems (approx. 3 bar)Weight: 527 g

Attractive, swiveling brass spout, polished or chromed finish.With 13-16 mm hose attachment.

Chromed brass, 3/8" attachment, plastic knobs.Hole diameter = 18 mm, tabletop max. 20 mm. The distance between the connecting pipes at the bottom is 75 mm.Mixing faucet with foldable and turnable spout.Can also be mounted directly on the sink.For compatible pipe-to-hose fitting for 10 mm or 13 mm hose (article-no. 1906-010, 1906-110) see the link below.

Chromed brass, with turnable drain and tap aeratorThe water volume is accurate adjustable, with smooth temperature regulation.Comes with 3/8" hose attachment.

Deck shower unit of solid construction for vertical bulkhead or wall installation in deck or cockpit areas. The housing is made of AISI 316 stainless steel and fitted with an overhanging, polished hinged cover. The cover is self-supporting and remains open by itself when opened. The hand shower with trigger lever and the hot/cold mixer with cylindrical control lever are also made of seawater-resistant stainless steel. Water flow is controlled by tilting the lever downward, while temperature is adjusted by turning the lever sideways. The mixer features two inlets for hot and cold water and a separate mixed-water outlet to the hand shower. Supplied with a 2.5 m extendable shower hose and connection hoses. The housing installation depth is 71 mm, plus additional space required for the rear screw-in connection hoses. The housing is mounted via a concealed mounting flange with four countersunk holes.Technical features:Installation type: vertical bulkhead or wall installationApplication area: deck or cockpitHousing material: AISI 316 stainless steelCover: overhanging, polished, hinged, self-supportingHand shower: stainless steel, with trigger leverMixer: hot/cold single-lever mixerMixer operation: Water flow control by tilting the lever downward: Temperature control by turning the lever sidewaysWater connections: 2 × hot/cold water inlets, 1 × mixed-water outlet to hand showerShower hose: extendable, length 2.5 mInstallation depth: 71 mm, plus rear connection clearanceMounting: concealed mounting flange with four countersunk holesTConnection hoses: included in delivery, connection thread: 3/8" (For 13 mm hose connections, we recommend ordering hose fitting Art. no. 1906-110 as an additional item.)

Chromed brass, attachment 3/8", plastic knob.Hole diameter = 18 mm, for tabletops of max. 20 mm.It is also possible to mount it directly to the sink.For compatible pipe-to-hose fitting for 10 mm or 13 mm hose (Art. No. 1906-010, 1906-110) see under accessories.

Brass, raw-cast finish.Simple design with bent outlet.Working pressure max. 8 bar.

Classic polished brass faucet, complete with threaded spout.Max. working water pressure 8 bar.Delivered without wall fastening panel, which can be ordered separately.Thread type: BSPThread form: parallelThe thread sizes are nominal sizes, they do not indicate the thread diameter.

Water faucet made from chromed brass, available with swivelling tap.Table top max. 20mm,Shipping with 2 connecting hoses 3/8", length 260mm.