Go to homepage
€0.00*
Jobs
Catalogue
Quick order

Bituminous mastic

from €12.80*

Content: 1

€12.80*

Content: 1 kg

Prices incl. VAT plus shipping costs

version
Ds
Fiber containing, elastic bitumen filler.
Very good adhesion properties, even on damp surfaces.
Resistant to sea water, thus exceptionally well suited for grouting plank seams.
After setting, the kit is permanently elastic and watertight.

May not be used for deck seams.
Show 2 articles
📖 View article in the TOPLICHT catalogue
Questions about the product?
Legal information about the product
CLP Regulation
Symbols ghs02 ghs07
Signalword Attention!
H phrases H226, H336, H412
P phrases P101, P102, P103, P261, P271, P280, P303+P361+P353, P304+P340, P501

More products from the category Sealing compound & glue

Bituminous mastic
Bituminous mastic
Fiber containing, elastic bitumen filler. Very good adhesion properties, even on damp surfaces. Resistant to sea water, thus exceptionally well suited for grouting plank seams. After setting, the kit is permanently elastic and watertight.May not be used for deck seams.

From €12.80 *
Details
ETTAN plank wax sealant
ETTAN plank wax sealant
Exclusive at TOPLICHT: Traditional planking wax, which is used in Sweden and elsewhere to seal small underwater leaks and cracks in wooden planking. The brown wax stays soft and will not harm the joints and planks, even in clinker-built boats. Can be applied, even to damp planks, from inside or outside with a putty knife, wood chip or (if warmed) with a brush.Sticks like the devil! This high - grade material will not be washed out by salt or fresh water. Composition: balsam resin, beech tar, wax, linseed oil, colophony.To be used underwater only. If used on deck, it may soften in summer heat and give brown marks to clothing.

From €25.90 *
Details
JEFFERY'S No.2 Black Marine-Glue
JEFFERY'S No.2 Black Marine-Glue
JEFFERY (not: JEFFREY) marine glue:English marine glue for traditional construction, for heating and pouring into deck seams.Thanks to its special composition, this marine glue is very heat resistant and barely fades in intensive sunlight. Appropriate for ships in warm areas.The chunks must be made liquid by heating (to approx. 200 degrees C) and then spread with a seaming ladle or filler into the deck seams. Specific weight: 1.36 g/ccm.Colour: black.Should normally be applied in two layers to avoid bubbles.Average usage: 1 kg to 10 metre seam run.

From €199.00 *
Details
Marine glue SKIBS BEG for deck seams
Marine glue SKIBS BEG for deck seams
As is commonly used in Scandinavia, caulk with a bitumen base for traditional construction, for pouring into deck seams. The chunks must be made liquid through heating and spread with a steaming ladle or filler into the deck seams.Colour: black.Average usage: 1 kg to 10 metre run.Please download our traditional pamphlet No 8 "caulking" (only in german language, we regret) at "Downloads & Information" below.

From €69.00 *
Details
Pitch for underwater seams
Pitch for underwater seams
Hot bitumen sealant for spreading or moulding caulking underwater plank seams.The compound must be liquefied by heating (approx. 180° C) and applied to the caulking underwater seams with a spatula, brush or roller. Not suitable for deck seams, as the compound softens in strong sunlight. The product is only available as a whole block.Further information on the subject of caulking can be found in our data sheet no. 8 "Caulking". You will find it below under "Downloads & Information".

€139.00 *
Details
Seaming ladle
Seaming ladle
Heavy steel ladle, that holds its heat for a long time when in use. For pouring marine glue in sealing decks. Hand-forged from a single piece. With hooked handle (length 380 mm) and forward spout. Entire length 500 mm, ladle diameter 120 mm (approx. 0.45 l). Weight approx. 1.2 kg. Please order see "Further Information" for our information sheet No. 8 "Caulking" below.

€89.50 *
Details

Zuletzt angesehene Artikel