Multipurpose grease

Calcium saponified grease according to DIN 51502, type KP2G-30 with EP (high pressure) additives and therefore suitable for use under high pressure and vibration.

We recommend the grease as sterntube grease and water-resistant universal grease. The 400 ml cartridge size is also ideal for lubricating folding and rotary blade propellers using a grease gun via grease nipples.

Specifications:

extremely water-resistant
very good adhesion with a long-lasting lubricating film,
long lubrication intervals due to very good ageing resistance,
good fulling penetration (NLGI class 2)
can be used at -30° to 120° C,

The 400 g cartridge fits into standard grease guns.

more information

from €13.90*

Content: 0.4 (€34.75* / 1 Liter)

€13.90*

Content: 0.4 Liter (€34.75* / 1 Liter)

Prices incl. VAT plus shipping costs

packaging

5kg-bucket

400g-cartridge

15Kg-bucket

Geb

View article in the TOPLICHT catalogue

Art. No.	packaging	Price (pack)	Delivery time	Note list	Buy

Description

Calcium saponified grease according to DIN 51502, type KP2G-30 with EP (high pressure) additives and therefore suitable for use under high pressure and vibration.

We recommend the grease as sterntube grease and water-resistant universal grease. The 400 ml cartridge size is also ideal for lubricating folding and rotary blade propellers using a grease gun via grease nipples.

Specifications:

extremely water-resistant
very good adhesion with a long-lasting lubricating film,
long lubrication intervals due to very good ageing resistance,
good fulling penetration (NLGI class 2)
can be used at -30° to 120° C,

The 400 g cartridge fits into standard grease guns.

Questions about the product?

Talk to craftsmen, boat builders and sailors. We understand your questions and provide the right answers.

Contact experts

Legal information about the product

CLP Regulation
Symbols
Signalword	Attention!
H phrases	H319, H412
P phrases	P273, P280, P305+P351+P338, P337+P313, P501

Hand lever grease gun M10x1 for 400ml cartridges

Grease hand press

length (mm): 400 | model: grease gun 400ml

High-quality hand lever grease gun made to industry standards.The housing is made of powder coated steelPrecision made pump tube with an output of 1,6 ml per stroke and 400 bar counter pressure.Suitable for 400 ml grease cartridge or manual filling. connection thread M10x1.Accessories:angulated nozzle pipeand high pressure rubber reinforced hose with self-clamping 4-jaw couplers.

€41.50 *

Details

Brass greaser

Made entirely of brass, angled base plate 80 x 72 mm for either side or floor mounting, plunger with O-ring seal. Attachment: Pipe thread 1/8" BSP, plunger dimater 44 mm.

€74.51 *

Details

Heavy duty greaser

The heavy duty greaser is made from steel (the screw-on cap is from brass).Base plate 97x97mm. The shaft and cylinder (diameter 80mm) are steel.A lead-out for the brass compression fitting is prepared.There are two sizes available: a litre and a 1/2 litre version.

From €149.00 *

Details

More Products from Category Grease, oil & lubricants

BALLISTOL Oil

BALLISTOL UNIVERSAL OIL is a biodegradable, skin-friendly multifunctional oil for cleaning, maintenance, lubrication, and corrosion protection. The oil has been manufactured since 1904 using an unchanged formula and is based on a mildly alkaline composition with lanolin and is free of silicone, PTFE, and acid. It does not resinify and is emulsifiable in water.Usable in industry, shipping, agriculture, household, outdoor activities as well as for machines, tools, leather, wood, rubber, and even for use on humans and animals.Application: BALLISTOL Universal Oil can be used as a rust protection, lubricant, penetrating or contact oil. It dissolves tar, grease, adhesive residues, and other unsuitable oils, neutralizes weak acids (e.g. hand sweat), and is suitable for the care of leather, natural wood, and oil-resistant plastics. Application is done with a cloth or brush. Technical DataApplication area: Corrosion protection, lubrication, cleaning, maintenanceSubstrate: Steel, iron, leather (except suede), natural wood, rubber, plasticCoverage: depends on application method Thinning: not requiredApplication method: cloth, brushDrying times: not applicable; remains active and does not resinifyFor more information on application, please refer to the Technical Data Sheet under 'Downloads'.

€5.95 *

Details

BALLISTOL oil spray can

BALLISTOL UNIVERSAL OIL is a biodegradable, skin-friendly multifunctional oil for cleaning, care, lubrication and corrosion protection. The oil has been produced according to the same recipe since 1904 and is based on a slightly alkaline formula with lanolin and is free from silicone, PTFE and acids. It does not resinify and can be emulsified in water.Can be used in industry, shipping, agriculture, household, outdoor activities as well as for machines, tools, leather, wood, rubber and even for use on humans and animals.Application: BALLISTOL Universal Oil can be used as a rust protection, lubricating, penetrating or contact oil. It dissolves tar, grease, adhesive residues and other unsuitable oils, neutralizes weak acids (e.g. hand perspiration) and is suitable for the care of leather, natural wood and oil-resistant plastics. It is applied by spraying &nbsp

€12.95 *

Details

BALLISTOL PTFE Dry Lubricant Spray

The BALLISTOL PTFE Dry Lubrication Spray is suitable for clean dry lubrication of sensitive areas. It is free from oil, grease, and silicone. Finest PTFE particles adhere even to microscopically small surface irregularities, thereby reducing adhesion, sliding, and rolling friction, and protecting against dirt and dust deposits. The spray is highly compatible with materials and suitable for all common materials.The spray is suitable for consistent and long-lasting lubrication of rollers and bearings, sliding guides and rails, cable pulls and telescopic guides, gears and cogs, as well as plastics of all kinds.Application: Shake well before use. Spray the product onto the cleaned surface from a distance of 10–25 cm and allow it to dry for a few minutes. A barely visible, dry film remains.Hazard information: Extremely flammable aerosol. Container is under pressure: it may burst when heated above 50°C. Causes serious eye irritation. Further information can be found below under "Downloads & Information".Technical dataApplication area: Dry lubrication in guides, bearings, gears, cable pulls, plastic and metal jointsSurface: Metal, plastic, rubber – clean, grease-free, dryPrimer: not requiredYield: dependent on application area (spray application)Thinning: not requiredApplication method: Aerosol sprayDrying times: short, depending on ambient temperatureFurther processing information can be found in the technical data sheet under 'Downloads'.

From €9.90 *

Details

CARAMBA SUPER PLUS Multi Spray

Proven all-rounder for decades, suitable for a wide range of applications in the workshop, on the house or on the boat. CARAMBA Multi-Oil combines the effectiveness of a rust remover, lubricant, corrosion protection, contact spray and cleaner in one product.The oil can be applied in doses in the practical spray can. It is silicone-free, does not resinify and is also compatible for the application on most plastics and rubber materials.Contents: 300 ml spray

€9.95 *

Details

FLUID FILM GEL BN Corrosion protection

Solvent-free, soft coating material based on lanolin (wool fat). FLUID FILM Gel BN is a physiologically safe and environmentally friendly corrosion protection agent. It serves as a single-layer long-term protective coating for ships, docks, offshore units, and similar objects when surface preparation is limited to high-pressure washing. The viscous gel can be used as a lubricant for machines, equipment, winches, and for wire rope preservation. The product offers excellent corrosion protection, lasting up to 20 years in enclosed spaces. It penetrates residual rust, and promotes the self-healing effect in case of damage to existing coatings. FLUID FILM Gel BN is temperature stable from -45 °C to +70 °C. Complies with MIL-Spec C-23050 guidelines. Preparation: Loose components, dirt, rust, and standing water must be removed before application. Surfaces must be dry.Application: FLUID FILM Gel BN can be applied using a brush, roller, spatula, or airless spray. The greater the layer thickness, the better the corrosion protection. Due to its gel-like consistency, thicker layers up to 1000 µm can be applied. The material can be used directly from the container. For areas with strong water turbulence, it is recommended to subsequently apply an additional layer of PERMA FILM (Art.No. 2718-501). Technical DataApplication area: Long-term protection for ballast tanks, voids, offshore structures, and metal partsSubstrate: Clean, dry, free from loose components; high-pressure cleaning recommendedLayer thickness: 600–1000 µm (airless spraying), 80 µm (brush/roller)Coverage: approx. 1.6 m²/l (at 600 µm), approx. 12 m²/l (at 80 µm)Application temperature: -10 °C to +40 °CApplication methods: Brush, roller, spatula, airless sprayingColor: Transparent (Gel BN)Temperature resistance: -45 °C to +70 °CFurther information on application can be found in the Technical Data Sheet under 'Downloads'.

From €30.90 *

Details

FLUID FILM LIQUID A Lanolin Corrosion Protection

FLUID FILM LIQUID A is a transparent, solvent-free, oil-based corrosion protection based on lanolin (wool grease) for soft coating of steel surfaces in above and underwater areas.The product displaces water, penetrates existing rust, and forms an elastic, adhesive protective film. It was originally intended for flooding repair-needed ballast water tanks on ships, floating docks, offshore units, for flooding coating of cavities, ballast water tanks, offshore structures, and hard-to-reach areas. The protective film lasts up to two years in enclosed cavities. Additionally, it is suitable for loosening seized rust or making rusted metal parts movable. Application on damp or slightly corroded surfaces is also possible.The product contains no solvents, is environmentally friendly, and easy to apply. Available as spray (type AS-R), in cans or containers (for dipping, spraying, or brushing).Application: Application is carried out depending on the area of use by flooding, brushing, rolling, or spraying. The material should be homogenized before use. After application, the gel time when flooding is about 3–4 hours. Application is possible at any temperature. Ensure adequate ventilation and personal protective equipment.Technical DataField of application: Single-layer corrosion protection on steel surfacesSubstrate: Steel (bare, rusty or damp); no special pretreatment necessaryPrimer: not requiredCoverage: approx. 12 m²/l at 80 µm wet film (roller, brush application)Thinning: not necessaryApplication method: Brush, roller, spraygun, flooding (professional users)Drying times: none; forms a non-drying, oily protective filmFor more information on application, refer to the technical data sheet under 'Downloads'.

From €29.90 *

Details

Grease spray TOP 2000

Soft, adhesive special grease with good seawater and fulling resistance as well as excellent pressure absorption capacity. Not resinous.

€19.94 *

Details

Multipurpose grease

Calcium saponified grease according to DIN 51502, type KP2G-30 with EP (high pressure) additives and therefore suitable for use under high pressure and vibration.We recommend the grease as sterntube grease and water-resistant universal grease. The 400 ml cartridge size is also ideal for lubricating folding and rotary blade propellers using a grease gun via grease nipples.Specifications:extremely water-resistantvery good adhesion with a long-lasting lubricating film,long lubrication intervals due to very good ageing resistance,good fulling penetration (NLGI class 2)can be used at -30° to 120° C,The 400 g cartridge fits into standard grease guns.

From €13.90 *

Details