Hand lead and line

Practical sounding lead with 30 metres of marked braided line (D=4mm) on a coiler made from Polyamide, the lead of approx. 0,6 kg is equipped with a hole for the arming of the lead.Every metre is marked with a coloured plastic marker. A colour change takes place at every 10m and 20m.

Traditional lead, made of cast iron, with strong color coating. The lead is used together with a lead-line to messure the water depth. On the bottom is a hole with which the characteristics of the seabed can be determined.

8mm SPLEITEX lead line marked by colour markings every 2m with strips of fabric:black at 2, 12 and 22m etc.,white at 4, 14 and 24m etc.,red at 6, 16 and 26 m etc.,yellow at 8, 18 and 28m etc.,and strip of leather (with holes) at 10, 20 and 30m etc.We also offer load lines individually made to your chosen length of more than 35m.

Inside mounting kit for the standard depth sounder transducer (D = 38 mm, H = 23 mm) made from plastic (i.e. for NASA).This inside mounting kit is recommended for vessels with a hull from solid GRP with a wall thickness of max. 20 mm.The kit consists of the plastic pipe section (which is to be glued into the hull) with lid, a 130 g polyester mastic, special transducing oil.

Echo sounder for measuring the water depth with large, easy to read 38 mm high digits.Technical Specifications:Compact size only 132 x 98 x 30mmKit includes standard NASA transducer (feedtrough diam. 16mm, height 105mm)Depth range of 0.8 to 100mDeep and shallow alarmsKeel offsetProgrammable ‘Gain’ profileLarge display, back-lit for night useSimple operationConsumption, 12mA, + 10mA display illuminationCompete with transducer and 7 metres of cableThe proven instruments of the NASA TARGET-2 series are characterized by easy-to-use devices with large, easy-to-read display with backlight, the displays are waterproof. The navigation instruments are easy to install. They have low power consumption (10mA + 10 mA for illumination) and are designed for 12 volt voltage.

Outside mounting kit for the standard depth sounder transducer (D = 38 mm, H = 23 mm), i.e. NASA.This complete mounting kit is recommended to protect the transducer from damage and to avoid water turbulence.The kit consists of mounting cover from plastic with stainless steel screws, 75 ml marine silicon, additional nut from nylon.

Noble plummet (sounding lead) made from hand-polished bronze. Soid sand cast body with big loop (D=19mm) for the sounding rope. With the classic hole in the bottom for a wad of tallow (to bring up parts of the seabed sediment).

Replacement transducer (oscillator) for the proven NASA, ECHOPILOT, or SEAFARER echo sounders.The transducer has a diameter of 38 mm and a height of 23 mm. The shaft length is 60 mm. The attached cable is 7 m long. 150 kHz, operating voltage 10–16 V, current consumption approx. 130 mA.The transducer can be installed in the traditional through-hull mounting style or used for in-hull mounting. In-hull mounting is performed inside a tube and is recommended only for fiberglass-reinforced plastic (FRP) hulls with a laminate thickness of up to 2 centimeters. You can find the appropriate installation kits under “Accessories & Spare Parts.”