Fender cleat CLAMCLEAT® | TOPLICHT

To be able to use the full range of Shopware 6, we recommend activating Javascript in your browser.

Art. No.	model	for rope (mm)	version	L (mm)	B (mm)	Unit price	Delivery time	Note list	Buy

Description

With the loop cleat it is easy to hang and tighten heavily loaded straps.
Intended, for example, for hanging fenders on the railing or for securing tarpaulins.
Robust manufacture, cleanly molded from black seawater-resistant nylon.

These practical cleats, which have been available in England for over 40 years, are now indispensable onboard. In the mean time, CLAMCLEAT® has produced more than 200 different models and designs, not only for sailors, surfers or hang-gliders, but also for many uses in daily life.

Downloads

Questions about the product?

Questions about the product?

Talk to craftsmen, boat builders and sailors. We understand your questions and provide the right answers.

Contact experts

More Products from Category Accessories for fenders

1056*01 SCOPREGA BRAVO 4 Doppelhub-Pumpe - Bild 1

Air pump BRAVO 4

Heavy-duty double action hand pump with hose and various nozzles.Intended for inflatable dinghies, fenders, etc. Sucks both air and water.Cylinder diameter 100 mm,height about 450 mm,power approx. 4 l of air per pump.

€37.00 *

6202-070 Tauwerkhalter aus Bronze (Anwendungsbeispiel)

Bronze rope holder

Made from strong matte bronze for the hanging-up of rope, fenders, boat hooks, oars, etc.Delivery without the pictured cordage.

€85.00 *

EASY FENDER Fenderkorb Edelstahl

EASY FENDER fender basket stainless steel

Fender basket made of polished stainless steel wire (4.5 mm) suitable for POLYFORM long fenders (F series).Mounting:The twistable connector B (item no. 1846-212) made of white polyamide allows attachment to railing tubes with a diameter between 22-30 mm. Two connectors are recommended, one at the top and one at the bottom. For connection of additional baskets a parallel connector C (article no. 1846-210) is required. The connectors come with matching stainless steel screws, only a screwdriver is needed for assembly. Supplied is one fender basket, the connectors are not included with the fender basket and must be ordered separately.

From €33.90 *

1329*01 Fenderbrett Mahagoni - Bild 1

Fender board mahagony plywood

The fender plank is an important tool when berthing in tidal waters, along sheet pile walls or on dolphin posts.High quality water-proof marine plywood AW 100 from mahogany with rounded corners and four holes for cordage.Varnished with UV resistant matte varnish.

€145.00 *

Loopklemme für Fender und Planen CLAMCLEAT®

Fender cleat CLAMCLEAT®

With the loop cleat it is easy to hang and tighten heavily loaded straps.Intended, for example, for hanging fenders on the railing or for securing tarpaulins.Robust manufacture, cleanly molded from black seawater-resistant nylon.These practical cleats, which have been available in England for over 40 years, are now indispensable onboard. In the mean time, CLAMCLEAT® has produced more than 200 different models and designs, not only for sailors, surfers or hang-gliders, but also for many uses in daily life.

From €5.90 *

1888*02 Fenderüberzug für POLYFORM A

Fender Cover for Ball Fender

Protect your boat with fender socks. A fender cover offers protection against scratches and rubbing marks from the fender on the boat hull, and effectively prevents squeaking and fender abrasion. The covers also prevent the fenders from getting dirty and protect them from UV radiation.The fender cover is stretchable and can be easily pulled over the fender. The hems are held together with ribbons.The fender socks are washable and fit perfectly with POLYFORM ball fenders or corresponding fenders from other manufacturers.

From €23.90 *

Fenderüberzug für Kugelfender schwarz

Fender Cover for Ball Fender Black

Protect your boat with fender socks. A fender cover offers protection against scratches and rubbing marks from the fender on the boat hull and effectively prevents squeaking and fender abrasion. The covers also prevent the fenders from getting dirty and protect them from UV radiation.The fender cover is stretchable and can be easily pulled over the fender. The hems are held together with ribbons.The fender socks are washable and fit perfectly with POLYFORM ball fenders or corresponding fenders from other manufacturers.

From €23.90 *

1888-201: Fenderüberzug für Langfender, flauschige Acryl-Stoff Ausführung mit Gummizug

Fendercover for Long Fender

Protect your boat with fender socks. A fender cover provides protection against scratches and fender rubbing marks on the hull, squeaking and fender abrasion are effectively prevented. The covers also prevent fenders from getting dirty and protect them from UV light.The fender socks are washable and fit exactly to the POLYFORM long fenders or to corresponding fenders of other manufacturers.Color: darkblue.Sizes F4 (item 1888-204) and F8 (item 1888-208) are made of a smooth polyester knit sock, for all other sizes the fender sock is made of a fleecy acrylic fabric.The fender cover is stretchable and easy to pull over the fender. The hems of the smooth polyester version are held together with ties.The acrylic fabric version has an elastic band on one side.

From €17.50 *

1888*04 Fenderüberzug für Langfender schwarz - Bild 1

Fendercover for Long Fender Black

Protect your boat with fender socks. A fender cover offers protection against scratches and rubbing marks from the fender on the boat hull and effectively prevents squeaking and fender abrasion. The covers also prevent the fenders from getting dirty and protect them from UV radiation. The fender socks are washable and fit perfectly with POLYFORM long fenders or corresponding fenders from other manufacturers.The fender cover is stretchy and can be easily pulled over the fender. It can be attached to the fender with an elastic band.Color: Black Material: Acrylic

From €17.50 *

1846*01 Fenderkorb Edelstahl NAWA - Bild 1

NAWA fender basket connector

NAWA fender basket connector suitable for stainless steel fender baskets (4 mm wire thickness).For installation:The rotatable universal connector made of black polyamide allows attachment to 25 mm railing tubes (two connectors are required). To connect two or more baskets, one pair of parallel connectors is required. The connectors come with matching stainless steel screws; only a screwdriver is required for installation.

Price on request

1091*01 Geflochtene Fenderleine mit eingespleisstem Auge - Bild 1

Plaited fender line with eye splicing

Made from high quality, double braided polyester cordage with a spliced eye on one end.Eye length 200 mm, colour white.Also employable as ratline or as seizing with many uses on board.

From €5.50 *

1695*01 Fenderpumpe POLYFORM

POLYFORM fender pump

Powerful fender pump, made of plastic with a wooden handle. Cylinder diameter: 60 mm. Cylinder length: 400 mm. Tip diameter: 7 and 10 mm.

€44.90 *

1695*03 POLYFORM Fenderpumpe MINI - Bild 1

POLYFORM Fender pump MINI

Small fender pump, made of plastic. Cylinder diameter: 34 mm. Cylinder length: 110 mm. Tip diameter: 7 mm.

€34.00 *

POLYFORM valve adapter

POLYFORM valve adapter

With the valve adapter POLYFORM fenders can also be inflated with an air pump or at the gas station.You can check which adapter you need for your fender by looking at the logo on the fender head or the shape of the valve screw.

From €4.90 *

2616*01 Tauklemme Kunststoff

Rope clamp

Clamps for finishing eyes and loops in rope without splicing or knoting. Intended for braided and 3-strand laid ropes with low up to moderate strain.Material: high-strength plastic.Color: white.

From €5.50 *

1056*03 Fußpumpe Scoprega Bravo 2 / 10

SCOPREGA BRAVO 2 / 10 foot pumps

Universal foot pumps for inflatable boats, fenders and much more.The BRAVO 2 model is a powerful single-chamber pump with 6.5 l air volume and various connectors.The BRAVO 10 model is a two-chamber pump. Chamber 2 (1.65 l) achieves a pressure of 0.8 bar; also suitable for deflating.With the BRAVO 10 double-chamber pump, any inflatable boat, but also many other items such as kayaks, SUPs or fenders, can be inflated easily and effortlessly. No additional pressure gauge is required as this foot pump has a pressure display.Maximum pressure (max. pressure): 0.8 barPump dimensions: 35 x 25 x h 8 cmMaterial: Robust, fiberglass-reinforced nylonWeight: 1.9 kg4 anti-slip feet for more stability,Robust standard hose and 6 adapters.The double-chamber system with 5 l and 1.6 l volume generates a high air volume (low pressure) in outlet 1, max. pressure 0.3 bar and a low air volume (high pressure) in outlet 2 with max. pressure 0.8 bar. The pump is therefore also suitable for inflating the inflatable floors of inflatable boats.

From €39.90 *

3202*01 Edelstahl-Bügel - Bild 1

Stainless steel holder / bracket

Stainless steel holder for life rings.Also well suited for hanging rope, fenders, tools, etc.

From €8.50 *

Last seen products

Request sent successfully

Request wasn't send - a error occured. Please try again.