Drum lifting clamp for steel drum types with bead

The DRY-BAG dehumidifier is a reusable moisture absorber designed to regulate humidity in enclosed spaces such as boat cabins, technical compartments, storage areas or motorhomes. It protects equipment, electronics and materials from condensation, mould and corrosion. The bag absorbs moisture from the surrounding air and retains it safely within the granules – completely drip-free and without the need for a collection tray.Simply place or hang the bag in the area to be protected – such as the cabin, bilge, lockers or engine room. Moisture absorption starts immediately. Once saturated, the bag can be regenerated by heating it in an oven at about 130 °C for 1–3 hours and then reused. For best performance, position the bag where air can circulate freely around it.Versions & DifferencesRetail Version (1 kg):  Durable woven bag with inspection window for easy monitoring. Ideal for smaller spaces such as cabins, caravans, tool lockers or wardrobes. Delivered in sealed bagLarge Version (2 kg): Durable woven bag with increased capacity, suitable for larger volumes or longer-term use, e.g. hull compartments, storage areas or shipping containers.Both versions contain the same eco-friendly Moclay® granules made from natural materials and are produced in Denmark.Technical featuresVersions: 1 kg (Retail) / 2 kg (Large Version)Active agent: Moclay® granules (natural mineral)Absorption capacity: up to 80 % of its own weightDuration per cycle: up to 90 daysReusable – oven regeneration at 130 °CDrip-free, maintenance-free, no tray requiredStandard guideline (for containers)8 bags (2 kg each) for 20-foot containers and 12–16 bags (2 kg each) for 40-foot containers. One bag covers an average of about 4–5 m³ of space. The optimal quantity depends on season, destination, transit time, and type of goods

Edge protection for lashing straps made from yellow plastic.Prevents damage and marks due to it's softly padded lower side.Easy to attach by latching to the tension belt.Available in two widths.

Two-part lashing straps with inspection label according to DIN EN 12195-2.Extra-strong ratchet with wide handle on a 50 cm strap section.Polyester webbing.Self-locking ratchet that will not release even under heavy vibration.Both sides fitted with zinc-plated claw hooks.For securing boats or cargo.The permissible maximum lashing capacity (LC = Lashing Capacity) applies for straight pull.

One-part lashing strap with inspection label according to DIN EN 12195-2.Stainless-steel ratchet, polyester webbing.Due to the stainless-steel ratchet, this strap is particularly suitable for maritime applications.The permissible maximum lashing capacity (LC = Lashing Capacity) applies when looped.Colours may vary.

Plug with enlargeable diameter, made of NBR rubber and galvanized steel.The diameter can be adjusted using the large wing nut. The threaded rod provides a flow or drainage option - the cover is unscrewed for this purpose. Exception: The smallest plug 6330-025 has no passage for draining.Technical featuresApplication range of the NBR rubber: -30 to +120 °CResistant to mineral oil products with an aromatic content of up to 50%Resistant to aromatic and chlorinated hydrocarbons and solventsResistant to oil and grease-resistant foodstuffsNot permanently resistant to solar radiationScupper plugs are used to temporarily seal open scuppers to prevent the uncontrolled flow or ingress of liquids. They are used in particular when liquids - such as oil - need to be retained and collected during work on board or in the event of leaks. Thanks to their precisely fitting design, scupper plugs can be inserted quickly and tightly into the openings and removed just as easily. As well as being used on tankers, they can also be used for maintenance work, accidents or for shutting off pipes and drains.