Skip to main content


Small, compact cabin stove for use with diesel or heating oil.
The fuel regulator is easily accessible behind a stainless steel cover with integrated, painted tiles.
Door with window, through which the flames can be observed.

Equipped with 6" Airflow burner shell of rust-free steel.
12 volt support ventilator, also available in 24 volt.
Heat production and fuel consumption (min/max) 1.9/4.75 kW - 0.24/0.60 l/h.

Required exhaust accessories: 3" / 75 mm (see accessories).

Includes a stainless steel water-heating coil is intended to heat water directly in an external warm water tank.
The coil can run dry without problems.

DICKINSON ship's stoves of Canada, made since 1932. Originally conceptualized for fishermen and professional mariners, these stoves stand out for their simple, but well-thought-out, design and solid construction.
All stoves are, as far as is possible, made of stainless steel. The stove plates are made of ground cast iron.

Functionality: All stoves work on the simple shell-burner principle. They can be used with either diesel or heating oil.
The oil runs from a tank, which must be installed at least 30 cm higher than the stove, with natural filling serving as regulator. If no tank can be integrated, the use of an electric fuel pump is also possible.
The installable regulator - developed and made by DICKINSON - keeps the correct fuel feed to the burner shell and, using a float switch, ensures the feed, in case the flame goes out unnoticed.
Reliable functionality, because it runs without failure-prone electronics and electrical systems. The regulator has a safety shutdown integrated in the adjustment knob that breaks the fuel flow when the temperature remains over 75°C. The stoves work very quietly and give off a comfortable, dry warmth!
To support the burning - exceptionally when lighting the stove or in difficult circumstances - the adjustable ventilator under that burner shell can be set.
For optimal burning, all stoves come equipped with a removable superheater.

Accessories

DICKINSON flue tubes
Stove pipe for DICKINSON stoves and ovens.Stainless steel.As a Dickinson importer and wholesaler, we carry just about every original spare part and accessory.

From €83.50 *
DICKINSON flue tube cover
Exhaust hood for DICKINSON stove pipes.Rain-proof standard hood, made of stainless steel.As a Dickinson importer and wholesaler, we carry just about every original spare part and accessory.

From €227.00 *
DICKINSON exhaust hood
Exhaust hood for DICKINSON stove pipes.H - shaped, for difficult ventilation situations.Stainless steel.As a Dickinson importer and wholesaler, we carry just about every original spare part and accessory.

From €227.00 *
DICKINSON flue tube through hull
DICKINSON deck sleeve made from stainless steel, fits DICKINSON stove pipes. delivery with inner ring (the inner ring can also be orderd seperatly). Matching covers (for when the pipe or hood is put below) are available. As a Dickinson importer and wholesaler, we carry just about every original spare part and accessory.

From €45.90 *
DICKINSON contact protection
As a Dickinson importer and wholesaler, we carry just about every original spare part and accessory.

From €163.00 *
Draw regulator for DICKINSON flue pipe
A stainless steel flue pipe T-piece with integrated draught regulator. The draught regulator is used as the first or second piece of pipe from the top of the stove or oven. The draught regulator helps to reduce the draught in long chimneys and allows the user to operate the appliance at a lower fuel setting.The draught reduction is adjustable. For this purpose, the pendulum damper is adapted to the respective chimney installation via an adjustable counterweight.Recommended for all installations and especially for chimneys with a height of 6 feet or more.As a Dickinson general importer and specialist wholesaler, we stock almost all original spare parts and accessories. Parts not listed here are available on request.

From €174.00 *
Flue pipe adapter
The flue accessory from the REFLEKS range may be used on DICKINSON stoves.To use the REFLEKS flue pipe, we offer an adapter that must be replaced on DICKINSON stoves.

From €61.90 *
DICKINSON flue tube bended
Pipe elbow for DICKINSON stove pipes.Stainless steel.As a Dickinson importer and wholesaler, we carry just about every original spare part and accessory.

From €102.00 *
Wall shade inox
Small reflector plate for heat protection behind flue pipes.Plate stainless steel.Measurements:50cm high, 15cm wide.Available as flat or recessed version.The flat plate must be mounted with spacers or insulation behind, the recessed plate can be mounted directly on the wall.

From €35.90 *
DICKINSON HEATEX transfer heater
Heater with which radiant heat from the exhaust pipe system is diverted to other rooms.Instead of a 550 mm stove pipe, HEATEX is used in the pipe system. It consists of a 550mm tube jacketed by a heat exchanger. On the back there is a flange with which DICKINSON pipes or flexible exhaust hoses are connected to the fan. When the fan is switched on, the heat is sucked in through the connecting line and distributed in the room.The scope of delivery includes the heat exchanger, the fan (12 or 24 volts) and a pipe angle.All parts are made of stainless steel.

From €442.00 *
DICKINSON heat exchange heater RADEX
Practical heater, which ensures the circulation of warm air throughout the cabin. The RADEX heat exchanger is attached to the motor's coolant system or a DICKINSON oven. One (type I) or two (type II) fan blowers then circulate the warm air into the cabin with minimal power use (0.74 A per fan). The heating takes place through an internal heat exchanger (copper tubing 19 mm with aluminum plates). In type II the fans can be turned on separately.Air flow per fan is approx. 170 cubic meters per hour.Outer housing of brushed stainless steel.

From €437.00 *
DICKINSON Oil-Controller
As a Dickinson importer and wholesaler, we carry just about every original spare part and accessory.

From €395.00 *

Similar products

Solid fuel heater DICKINSON NEWPORT
The NEWPORT is a small solid fuel stove for wood, coal and charcoal.Its small installation dimensions and compact shape make it very suitable as a cabin stove.Stainless steel model with removable ash pan and adjustable stove flap.Suitable stove pipes in size 3" and other necessary accessories can be found here or further down on the page under "Accessories & spare parts".Make sure that the maximum wood load is not exceeded, otherwise the stove may be damaged.DICKINSON specifies the maximum amount of wood as 10 pieces 25 x 25 x 127 mm.

€779.00 *
DICKINSON NEWPORT oil stove wall-mounted
Small, compact cabin stove for use with diesel or heating oil.Fuel regulator easily accessible behind a stainless steel cover.Door with window, through which the flames can be observed.Equipped with 6" Airflow burner shell of rust-free steel.12 volt support ventilator, also available in 24 volt.Heat production and fuel consumption (min/max) 1.9/4.75 kW - 0.24/0.60 l/h.Required exhaust accessories: 3" / 75 mm (see accessories).The optional stainless steel water-heating coil (tube diameter 16 mm) is intended to heat water in an external boiler tank directly.The coil can run dry without problems.DICKINSON ship's stoves of Canada, made since 1932. Originally conceptualized for fishermen and professional mariners, these stoves stand out for their simple, but well-thought-out, design and solid construction. All stoves are, as far as is possible, made of stainless steel.Functionality: All stoves work on the simple shell-burner principle. They can be used with either diesel or heating oil. The oil runs from a tank, which must be installed at least 30 cm higher than the stove, with natural filling serving as regulator. If no tank can be integrated, the use of an electric fuel pump is also possible. The installable regulator - developed and made by DICKINSON - keeps the correct fuel feed to the burner shell and, using a float switch, ensures the feed, in case the flame goes out unnoticed.Reliable functionality, because it runs without failure-prone electronics and electrical systems. The regulator has a safety shutdown integrated in the adjustment knob that breaks the fuel flow when the temperature remains over 75°C. The stoves work very quietly and give off a comfortable, dry warmth!To support the burning - exceptionally when lighting the stove or in difficult circumstances - the adjustable ventilator under that burner shell can be set.For optimal burning, all stoves come equipped with a removable superheater.

From €1,439.00 *
DICKINSON ALASKA oil stove
Small, compact freestanding cabin stove. Fuel: diesel or heating oil. Fuel regulator easily accessible behind a stainless steel cover. Door with window, through which the flames can be observed. Equipped with 6" Airflow burner shell of rust-free steel.12 volt support ventilator, also available in 24 volt.Heat production and fuel consumption (min/max) 1.9/4.75 kW - 0.24/0.60 l/h.Required exhaust accessories: 3" / 75 mm (see accessories).DICKINSON ship's stoves of Canada, made since 1932. Originally conceptualized for fishermen and professional mariners, these stoves stand out for their simple, but well-thought-out, design and solid construction. All stoves are, as far as is possible, made of stainless steel. The stove plates are made of ground cast iron.Functionality: All stoves work on the simple shell-burner principle. They can be used with either diesel or heating oil. The oil runs from a tank, which must be installed at least 30 cm higher than the stove, with natural filling serving as regulator. If no tank can be integrated, the use of an electric fuel pump is also possible. The installable regulator - developed and made by DICKINSON - keeps the correct fuel feed to the burner shell and, using a float switch, ensures the feed, in case the flame goes out unnoticed. Reliable functionality, because it runs without failure-prone electronics and electrical systems. The regulator has a safety shutdown integrated in the adjustment knob that breaks the fuel flow when the temperature remains over 75°C. The stoves work very quietly and give off a comfortable, dry warmth! To support the burning - exceptionally when lighting the stove or in difficult circumstances - the adjustable ventilator under that burner shell can be set. For optimal burning, all stoves come equipped with a removable superheater.

From €1,379.00 *
DICKINSON LOFOTEN oil stove
Combination model that serves for heating and cooking.The square cabin stove is only 455 mm tall, and with its compact dimensions of 275 x 435 mm (width x depth) can be fit in a small niche.The stove is, as is required in DICKINSON products, made entirely of stainless steel. A burnished black perforated metal plate is mounted around the stove to keep things on top stable.Required exhaust accessories: 4" / 100 mm (see accessories).The diesel regulator can easily be reached on the front of the stove.An observation window allows the flame to be controlled from the front.The built-in fan brings the stove quickly to working temperature, the switch and potentiometer for which are in a detached box for mounting.The stove comes with a 6" Airflow burner, heat output and fuel consumption (min/max): 1.9/4.75 kW - 0.24/0.6 l/h.Stove weight: 11 kg.The oval exhaust pipe leaves enough space for a kettle or pot on the removable cast-iron hotplate - required exhaust accessory: 4", see accessories below. DICKINSON ship's stoves and oil heaters are made in Canada since 1932. Initially conceived for the fishing and professional maritime industries, these stoves stand out for their simple, yet thoughtful design and solid construction.All stoves are, as far as possible, made of stainless steel. The hotplates are made of ground cast iron.Functionality: All stoves follow the simple principle of shell burners. They can run on diesel or heating oil.The oil flows from the tank, which must be installed at least 30cm above the stove, using gravity into the stove regulator. If you cannot install a tank, an electric pump can also be used.The adjustable regulator - developed and made by DICKINSON regulates the correct fuel supply to the burner, and a floater ensures a safety shutdown, if the flame goes out unnoticed.Reliable functionality, because they are without failure-prone electricity or electronics. The regulator has an safety switch integrated in its control knob, so that the fuel supply is interrupted when the temperature exceeds 75°C for any length of time. The stoves work very quietly and give off a comfortable, dry warmth!To support burning - particularly when lighting the stove or when the stove is having difficulty establishing a draught - the adjustable ventilator under the burner can be closed.For optimal burning, all stoves come equipped with a removable flame catalyst ("Superheater").

From €1,559.00 *
DICKINSON ANTARCTIC oil stove
Compact floor mounted cabin stove. Fuel: diesel or heating oil. The fuel regulator is easily accessible from the front.The size of this heater produces a greater heat output than the smaller heaters although fuel consumption is the same.This model is round in design and has a large door with a window, through which the flames can easily be observed.Required exhaust accessories: 3" / 75 mm (see accessories).Equipped with 6" Airflow burner shell of rust-free steel.12 volt support ventilator, can be converted to 24 volt.Heat production and fuel consumption (min/max) 1.9/4.75 kW - 0.24/0.60 l/h.Dimensions (W x D x H): 330 x 355 x 635 mm, Weight 12,25 kg. DICKINSON ship's stoves of Canada, made since 1932. Originally conceptualized for fishermen and professional mariners, these stoves stand out for their simple, but well-thought-out, design and solid construction. All stoves are, as far as is possible, made of stainless steel. The stove plates are made of ground cast iron.Functionality: All stoves work on the simple shell-burner principle. They can be used with either diesel or heating oil. The oil runs from a tank, which must be installed at least 30 cm higher than the stove, with natural filling serving as regulator. If no tank can be integrated, the use of an electric fuel pump is also possible. The installable regulator - developed and made by DICKINSON - keeps the correct fuel feed to the burner shell and, using a float switch, ensures the feed, in case the flame goes out unnoticed.Reliable functionality, because it runs without failure-prone electronics and electrical systems. The regulator has a safety shutdown integrated in the adjustment knob that breaks the fuel flow when the temperature remains over 75°C. The stoves work very quietly and give off a comfortable, dry warmth!To support the burning - exceptionally when lighting the stove or in difficult circumstances - the adjustable ventilator under that burner shell can be set.For optimal burning, all stoves come equipped with a removable superheater.

From €1,599.00 *

Last seen products