Skip to main content


Downloads

Solid, proven diesel stove for cooking, baking and heating.
Proven on long voyages, practically tested hundreds of times.

Required exhaust accessories: 5" / 127 mm (see accessories).

Completely equipped:

  • Fuel regulator,
  • Ceramic-lined combustion chamber,
  • Cast-iron cooking plates with rim and pot holders,
  • Baking grid and plate lifter,
  • Window into the combustion chamber,
  • Opening oven door with integrated thermometer,
  • 12 volt support ventilator - also available for 24 volt systems.

Optional built-in stainless steel spiral (d = 16 mm) to produce hot water (Boiler).

Output: min. 1,9 kW, max. 4,8 kW.
Consumption: min. 0,2 l/h, max. 0,6 l/h.

Please request the complete DICKINSON brochure (INFO No. 47).
Shipment without cookware.

DICKINSON ship's stoves of Canada, made since 1932. Originally conceptualized for fishermen and professional mariners, these stoves stand out for their simple, but well-thought-out, design and solid construction.
All stoves are, as far as is possible, made of stainless steel. The stove plates are made of ground cast iron.

Functionality: All stoves work on the simple shell-burner principle. They can be used with either diesel or heating oil.
The oil runs from a tank, which must be installed at least 30 cm higher than the stove, with natural filling serving as regulator. If no tank can be integrated, the use of an electric fuel pump is also possible.
The installable regulator - developed and made by DICKINSON - keeps the correct fuel feed to the burner shell and, using a float switch, ensures the feed, in case the flame goes out unnoticed.
Reliable functionality, because it runs without failure-prone electronics and electrical systems. The regulator has a safety shutdown integrated in the adjustment knob that breaks the fuel flow when the temperature remains over 75°C. The stoves work very quietly and give off a comfortable, dry warmth!
To support the burning - exceptionally when lighting the stove or in difficult circumstances - the adjustable ventilator under that burner shell can be set.
For optimal burning, all stoves come equipped with a removable superheater.

Accessories

DICKINSON flue tubes
Stove pipe for DICKINSON stoves and ovens.Stainless steel.As a Dickinson importer and wholesaler, we carry just about every original spare part and accessory.

From €83.50 *
DICKINSON flue tube cover
Exhaust hood for DICKINSON stove pipes.Rain-proof standard hood, made of stainless steel.As a Dickinson importer and wholesaler, we carry just about every original spare part and accessory.

From €227.00 *
DICKINSON exhaust hood
Exhaust hood for DICKINSON stove pipes.H - shaped, for difficult ventilation situations.Stainless steel.As a Dickinson importer and wholesaler, we carry just about every original spare part and accessory.

From €227.00 *
DICKINSON flue tube through hull
DICKINSON deck sleeve made from stainless steel, fits DICKINSON stove pipes. delivery with inner ring (the inner ring can also be orderd seperatly). Matching covers (for when the pipe or hood is put below) are available. As a Dickinson importer and wholesaler, we carry just about every original spare part and accessory.

From €45.90 *
DICKINSON contact protection
As a Dickinson importer and wholesaler, we carry just about every original spare part and accessory.

From €163.00 *
Draw regulator for DICKINSON flue pipe
Draw stabilization. This stove pipe connector regulates the vacuum in the chimney.By adjusting the counterweight of the regulator flap the air flow of the flue pipe may be modified according to the chimney installation - for best heating results.As a Dickinson importer and wholesaler, we carry just about every original spare part and accessory.

From €174.00 *
Flue pipe adapter
The flue accessory from the REFLEKS range may be used on DICKINSON stoves.To use the REFLEKS flue pipe, we offer an adapter that must be replaced on DICKINSON stoves.

From €61.90 *
DICKINSON flue tube bended
Pipe elbow for DICKINSON stove pipes.Stainless steel.As a Dickinson importer and wholesaler, we carry just about every original spare part and accessory.

From €102.00 *
Wall shade inox
Small reflector plate for heat protection behind flue pipes.Plate stainless steel.Measurements:50cm high, 15cm wide.Available as flat or recessed version.The flat plate must be mounted with spacers or insulation behind, the recessed plate can be mounted directly on the wall.

From €35.90 *
DICKINSON Oil-Controller
As a Dickinson importer and wholesaler, we carry just about every original spare part and accessory.

From €395.00 *
Superheater 6"-Airflow-burner DICKINSON
As a Dickinson importer and wholesaler, we carry just about every original spare part and accessory.

€76.00 *
DICKINSON heat exchange heater RADEX
Practical heater, which ensures the circulation of warm air throughout the cabin. The RADEX heat exchanger is attached to the motor's coolant system or a DICKINSON oven. One (type I) or two (type II) fan blowers then circulate the warm air into the cabin with minimal power use (0.74 A per fan). The heating takes place through an internal heat exchanger (copper tubing 19 mm with aluminum plates). In type II the fans can be turned on separately.Air flow per fan is approx. 170 cubic meters per hour.Outer housing of brushed stainless steel.

From €437.00 *

Similar products

DICKINSON BEAUFORT oill stove
Solid, massive diesel stoves from Canadian manufacture for cooking, baking and heating.The body is made from brushed stainless steel, the massive cooking plates from cast iron. Required exhaust accessories: 5" / 127 mm (see accessories).Extensive equipment configuration:Fuel regulator,Ceramic-lined combustion chamber, Cooking plates with rim and pot holders, Baking sheet and plate lifter,Window into the combustion chamber, Opening oven door with integrated thermometer, Built-in utensil storage compartment.12 or 24 volt supported ventilator for optimal heat yield, Optional built-in stainless steel spiral to produce hot water (boiler). The DICKINSON water-heater spiral is made of stainless steel and intended to heat the water directly from the boiler as is needed. The spiral can run dry with no problems. The attachment of radiators is not recommended by DICKINSON because of the low heat output of the spiral. Output: min. 2,9 kW, max. 9,3 kW.Consumption: min. 0,4 l/h, max. 1,2 l/h.Please request the complete DICKINSON brochure (INFO Nr. 47).Shipping without cookware. DICKINSON ship stoves of Canada, made since 1932. Originally conceptualised for fishermen and professional mariners, these stoves stand out for their simple, but well-thought-out, design and solid construction. All stoves are, as far as is possible, made of stainless steel. The stove plates are made of ground cast iron.Functionality: All stoves work on the simple shell-burner principle. They can be used with either diesel or heating oil. The oil runs from a tank, which must be installed at least 30 cm higher than the stove, with natural filling serving as regulator. If no tank can be integrated, the use of an electric fuel pump is also possible. The installable regulator - developed and made by DICKINSON - keeps the correct fuel feed to the burner shell and, using a float switch, ensures the feed, in case the flame goes out unnoticed.Reliable functionality, because it runs without failure-prone electronics and electrical systems. The regulator has a safety shutdown integrated in the adjustment knob that cuts the fuel flow when the temperature remains over 75°C. The stoves work very quietly and give off a comfortable, dry warmth!To support the burning - exceptionally when lighting the stove or in difficult circumstances - the adjustable ventilator under that burner shell can be set.For optimal burning, all stoves come equipped with a removable superheater.

From €5,550.00 *
DICKINSON BRISTOL oill stove
Solid and proven diesel stove for cooking, baking and heating.Required exhaust accessories: 4" / 100 mm (see accessories).Complete equipment:Fuel regulator,Ceramic-lined combustion chamber,Cast-iron cooking plates with rim and pot holders,Baking grid and plate lifter,Window into the combustion chamber,Opening oven door with integrated thermometer,12 volt support ventilator - also available for 24 volt systems.Optional built-in stainless steel spiral (d = 16 mm) to produce hot water (Boiler).Output: min. 1,9 kW, max. 4,8 kW.Consumption: min. 0,2 l/h, max. 0,6 l/h.DICKINSON ship's stoves of Canada, made since 1932. Originally conceptualized for fishermen and professional mariners, these stoves stand out for their simple, but well-thought-out, design and solid construction. All stoves are, as far as is possible, made of stainless steel. The stove plates are made of ground cast iron.Functionality: All stoves work on the simple shell-burner principle. They can be used with either diesel or heating oil. The oil runs from a tank, which must be installed at least 30 cm higher than the stove, with natural filling serving as regulator. If no tank can be integrated, the use of an electric fuel pump is also possible. The installable regulator - developed and made by DICKINSON - keeps the correct fuel feed to the burner shell and, using a float switch, ensures the feed, in case the flame goes out unnoticed.Reliable functionality, because it runs without failure-prone electronics and electrical systems. The regulator has a safety shutdown integrated in the adjustment knob that breaks the fuel flow if the temperature remains over 75°C. The stoves work very quietly and give off a comfortable, dry warmth!To support the burning - exceptionally when lighting the stove or in difficult circumstances - the adjustable ventilator under that burner shell can be set.For optimal burning, all stoves come equipped with a removable superheater.

From €2,389.00 *
DICKINSON BERING oil stove
Solid, proven diesel stove for cooking, baking and heating. Required exhaust accessories: 5" / 127 mm (see accessories).Completely equipped:Fuel regulator,Ceramic-lined combustion chamber,Cast-iron cooking plates with rim and pot holders,Baking grid and plate lifter,Window into the combustion chamber,Opening oven door with integrated thermometer, 12 volt support ventilator - also available for 24 volt systems. Optional built-in stainless steel spiral (d = 16 mm) to produce hot water (Boiler). Output: min. 1,9 kW, max. 4,8 kW.Consumption: min. 0,2 l/h, max. 0,6 l/h. Please request the complete DICKINSON brochure (INFO Nr. 47). DICKINSON ship's stoves of Canada, made since 1932. Originally conceptualized for fishermen and professional mariners, these stoves stand out for their simple, but well-thought-out, design and solid construction. All stoves are, as far as is possible, made of stainless steel. The stove plates are made of ground cast iron.Functionality: All stoves work on the simple shell-burner principle. They can be used with either diesel or heating oil. The oil runs from a tank, which must be installed at least 30 cm higher than the stove, with natural filling serving as regulator. If no tank can be integrated, the use of an electric fuel pump is also possible. The installable regulator - developed and made by DICKINSON - keeps the correct fuel feed to the burner shell and, using a float switch, ensures the feed, in case the flame goes out unnoticed.Reliable functionality, because it runs without failure-prone electronics and electrical systems. The regulator has a safety shutdown integrated in the adjustment knob that breaks the fuel flow when the temperature remains over 75°C. The stoves work very quietly and give off a comfortable, dry warmth!To support the burning - exceptionally when lighting the stove or in difficult circumstances - the adjustable ventilator under that burner shell can be set.For optimal burning, all stoves come equipped with a removable superheater.

From €2,215.00 *
DICHINSON PACIFIC oill stove
Solid, proven diesel stove for cooking, baking and heating.Required exhaust accessories: 5" / 127 mm (see accessories).Completely equipped:Fuel regulator,Ceramic-lined combustion chamber,Cast-iron cooking plates with rim and pot holders,Baking grid and plate lifter,Window into the combustion chamber,Opening oven door with integrated thermometer,Support ventilator (variable speed) - available for 12 volt or 24 volt systems.Optional built-in stainless steel coil (D = 16 mm) to produce hot water (in a separate boiler which is not included). Output: min. 1,9 kW, max. 4,8 kW.Consumption: min. 0,2 l/h, max. 0,6 l/h.Please request the complete DICKINSON brochure (INFO Nr. 47).Shipment without cookware.DICKINSON ship's stoves of Canada, made since 1932. Originally conceptualized for fishermen and professional mariners, these stoves stand out for their simple, but well-thought-out, design and solid construction. All stoves are, as far as is possible, made of stainless steel. The stove plates are made of ground cast iron.Functionality: All stoves work on the simple shell-burner principle. They can be used with either diesel or heating oil. The oil runs from a tank, which must be installed at least 30 cm higher than the stove, with natural filling serving as regulator. If no tank can be integrated, the use of an electric fuel pump is also possible. The installable regulator - developed and made by DICKINSON - keeps the correct fuel feed to the burner shell and, using a float switch, ensures the feed, in case the flame goes out unnoticed.Reliable functionality, because it runs without failure-prone electronics and electrical systems. The regulator has a safety shutdown integrated in the adjustment knob that breaks the fuel flow when the temperature remains over 75°C. The stoves work very quietly and give off a comfortable, dry warmth!To support the burning - exceptionally when lighting the stove or in difficult circumstances - the adjustable ventilator under that burner shell can be set.For optimal burning, all stoves come equipped with a removable superheater.

From €2,650.00 *
DICKINSON ATLANTIC oil stove
Solid, proven diesel stove for cooking, baking and heating.Required exhaust accessories: 5" / 127 mm (see accessories).Completely equipped:Fuel regulator,Ceramic-lined combustion chamber, Cast-iron cooking plates with rim and pot holders, Baking grid and plate lifter,Window into the combustion chamber, Opening oven door with integrated thermometer, 12 volt support ventilator - also available for 24 volt systems. Optional built-in stainless steel spiral (d = 16 mm) to produce hot water (Boiler). Output: min. 2,4 kW, max. 7,2 kW.Consumption: min. 0,3 l/h, max. 0,9 l/h. Please request the complete DICKINSON brochure (INFO Nr. 47).Shipment without cookware.DICKINSON ship's stoves of Canada, made since 1932. Originally conceptualized for fishermen and professional mariners, these stoves stand out for their simple, but well-thought-out, design and solid construction. All stoves are, as far as is possible, made of stainless steel. The stove plates are made of ground cast iron.Functionality: All stoves work on the simple shell-burner principle. They can be used with either diesel or heating oil. The oil runs from a tank, which must be installed at least 30 cm higher than the stove, with natural filling serving as regulator. If no tank can be integrated, the use of an electric fuel pump is also possible. The installable regulator - developed and made by DICKINSON - keeps the correct fuel feed to the burner shell and, using a float switch, ensures the feed, in case the flame goes out unnoticed.Reliable functionality, because it runs without failure-prone electronics and electrical systems. The regulator has a safety shutdown integrated in the adjustment knob that breaks the fuel flow when the temperature remains over 75°C. The stoves work very quietly and give off a comfortable, dry warmth!To support the burning - exceptionally when lighting the stove or in difficult circumstances - the adjustable ventilator under that burner shell can be set.For optimal burning, all stoves come equipped with a removable superheater.

From €3,739.00 *

Last seen products