Seizing Wire | TOPLICHT

To be able to use the full range of Shopware 6, we recommend activating Javascript in your browser.

Jobs

Catalogue

Art. No.	D (mm)	version	length (m)	weight (kg)	Unit price	Delivery time	Note list	Buy

Galvanized, soft iron wire cord for seizing shackles, etc.
Comes in large coils.
Small lengths diviations are possible.

Description

Galvanized, soft iron wire cord for seizing shackles, etc.
Comes in large coils.
Small lengths diviations are possible.

Questions about the product?

Last seen products

More articles from this category

Sailmakers repair kit

Sailmakers repair kit

The practical adhesive sailcloth kit is perfect for a quick sail repair.This saves time and effort and provides, by simply attaching at sea, temporary maintenance.Since the adhesive cloth is sticked onto both sides, the force can be transmitted evenly into the sail. Content: 2x adhesive cloth A4, 2x adhesive cloth A5, 2x adhesive cloth A6, 2x adhesive cloth D = 8 cm, 2x adhesive cloth D = 15 cm, instructions in German & English.

€29.95 *

cable cover

White, slit PVC tubing of 1,80m length. The protection for shrouds is easily mounted by pressing it over the wire, the tube immediately snaps shut. The cable cover is also suited for railing line.

From €7.90 *

Stainless steel wire rope 1x19

Stainless steel wire rope 1x19

Rust-free wire, made from stainless steel 1.4401 (AISI316).Very stiff and low stretch wire for shrouds and stays.Not able to be spliced.Not permanent in stock. Available per meter, also available in 125 m spools.

From €1.95 *

Stainless steel wire rope 7x7

Stainless steel wire rope 7x7

Rust-free wire, of stainless steel 1.4401 (AISI316). Low stretch shroud wire with a somewhat more flexible cable construction 7x7. This construction has the same outer structure as classic, galvanized shroud wire and is therefore well suited in specific cases for stays and shrouds on traditional ships.In an emergency this wire can also be spliced. It is also useable as steering wire for rudder fittings.

From €0.64 *

Covered guardrail wire in metre lengths

Covered guardrail wire in metre lengths

Stainless-steel wire covered with white PVC (construction 7x7) for lifelines, guys, bolt ropes, and other uses where impact resistance and abrasion protection are crucial. We have chosen for you from the lifeline alternatives in the market the one with the thickest and thus longest-lasting cover.Shipping in metre lengths. For the best price, please order in lengths divisible by 50 meters. You will find guardrail wire on 125 m spools under "Suitable Items" at the bottom of this page. Other diameters and qualities are available on request.

From €1.95 *

Stainless steel wire rope 7x7 125m-spool

Stainless steel wire rope 7x7 125m-spool

Rust-free wire, of stainless steel 1.4401 (AISI316). Low stretch shroud wire with a somewhat more flexible cable construction 7x7. This construction has the same outer structure as classic, galvanized shroud wire and is therefore well suited in specific cases for stays and shrouds on traditional ships. In an emergency this wire can also be spliced. It is also useable as steering wire for rudder fittings. Comes in 125 m spools, also available per meter.

From €35.00 *

Steel wire rope for shrouds 6x7

Steel wire rope for shrouds 6x7

Stiff, low-stretch wire for standing rigging.Lubricated and galvanized with a special strong, so-called "fishing galvanization," it is particularly corrosion-resistant.6x7 wire construction conforms to DIN 3055, with thick individual wires that are less susceptible to mechanical damage.1570 N/sq mm single wire strength.

From €3.86 *

Steel wire rope FC galvanized 25m

Steel wire rope FC galvanized 25m

Simple, inexpensive galvanized steel wire.Stiff, low-stretch wire construction, intended for a variety of strains and suspensions.

€29.80 *

Steel wire rope FC galvanized 300m

Steel wire rope FC galvanized 300m

Simple, inexpensive galvanized steel wire.Stiff, low-stretch wire construction, intended for a variety of strains and suspensions.

€195.01 *

Stainless steel wire rope 7x19

Stainless steel wire rope 7x19

Rust-free wire, made from stainless steel 1.4401 (AISI316). Thin and flexible wire with a 7x19 cable construction, exceptionally well suited for running rigging (halyards, etc.).Warning: The flex radius must be kept as large as possible! This wire should only run over sheaves whose diameter is not smaller than the 14- to 15-fold wire diameter.Available per meter, also available in 125 m spools.

From €1.09 *

Stainless steel wire strop

Stainless steel wire strop

Stainless-steel wire (7 x 19 construction), with stainless steel thimbles at both ends held on by copper sleeves. Length specification: pressure point to pressure point.

From €12.90 *

Stainless steel wire rope 7x19 125m-spool

Stainless steel wire rope 7x19 125m-spool

Rust-free wire, made from stainless steel 1.4401 (AISI316). Thin and flexible wire with a 7x19 cable construction, exceptionally well suited for running rigging (halyards, etc.).Warning: The flex radius must be kept as large as possible! This wire should only run over sheaves whose diameter is not smaller than the 14- to 15-fold wire diameter.Delivery in 125 m spools, also available per meter.

Price on request

Splicing needle set

Splicing needle set

Simple splicing set for braided rope: the essential tool.The set is made up of 4 splicing fittings of plastic for rope diameters 6-8, 10, 12, 14 mm and a corresponding pusher.A simple splicing manual is included.

€24.50 *

D-SPLICER set / 4 splicing needles

D-SPLICER set / 4 splicing needles

D-SPLICER set with 4 interchangable needles in 2 size with one exchangeable handle. For cordage up to 4 mm.U-shaped tackle needle with handle to splice braided rope as well as for the drawing of the yarn when whipping the rope.Made for rope thinner than 4 mm.Set with 4 needles in 2 sizes.The D-SPLICER is perfectly suited for modern high tech rope, but is also very well usable as through pull in traditional rigging work.D1 identifies the rope diameter that can be pinched in the needle.Wire-diameter denotes the diameter of the needle wire.

€52.00 *

D-SPLICER FIXED

D-SPLICER FIXED

D-SPLICER one-on-one needles with one fixed handle.U-shaped tackle needle with handle to splice braided rope as well as for the drawing of the yarn when whipping the rope.Made for rope thinner than 8 mm.The D-SPLICER is perfectly suited for modern high tech rope, but is also very well usable as through pull in traditional rigging work.D1 identifies the rope diameter that can be pinched in the needle.Wire-diam. denotes the diameter of the needle wire.

From €26.50 *

D-SPLICER FIXED size XL

D-SPLICER FIXED size XL

D-SPLICER one-on-one needles with one fixed handle and XL length. U-shaped tackle needle with handle to splice braided rope as well as for the drawing of the yarn when whipping the rope.Made for rope thinner than 8 mm.The D-SPLICER is perfectly suited for modern high tech rope, but is also very well usable as through pull in traditional rigging work.D1 identifies the rope diameter that can be pinched in the needle.Wire-diam. denotes the diameter of the needle wire.

From €36.50 *

D-SPLICER SOFT FID

D-SPLICER SOFT FID

The D-SPLICER SOFT FID is meant for larger diameters of cordage. A rope hose with a thin recuperator line made from DYNEEMA with which the rope ends can be pulled through the meshwork. A perfect good solution for tight-fitting netting, where all other splicing needles fail to work.The D-SPLICER is perfectly suited for modern high tech rope, but is also very well usable as through pull in traditional rigging work.D1 identifies the rope diameter.

From €27.50 *

D-SPLICER splicing tape

D-SPLICER splicing tape

A special tape by D-SPLICER made for splicing modern high tech rope. This tape is particularly thin and smooth.

€6.50 *

Set of hollow fids SELMA

Set of hollow fids SELMA

Patented stainless steel tool for every type of rope-splicing by the manufacturer SELMA.Intended primarily for splicing braided line. When splicing double-braid rope (Samson splice), the 4-piece set for rope diameters 6-16 mm (hollow braid 4-12 mm), or the 5-piece set for rope diameters 6-20 mm (hollow braid 4-14 mm) is used. For splicing laid rope, use the 4-piece set for rope diameters up to 20 mm and the 5-piece set for rope diameters up to 28 mm.A splicing manual is included.

From €45.90 *

GLEISTEIN Alu splice needles and pusher

GLEISTEIN Alu splice needles and pusher

Needles and pushers made of aluminium for splicing double-braid ropes (SAMSON splice). There is a needle for each rope diameter which can also be used as a measure of length for the SAMSON splicing method. The SAMSON splice is discribed in the GLEISTEIN splicing book.

From €19.69 *

Request sent successfully

Request wasn't send - a error occured. Please try again.