Go to homepage
€0.00*
Jobs
Catalogue
Quick order

Description

NORSEMAN cones for 1x19 strand rope construction.

Questions about the product?
Questions about the product?
Talk to craftsmen, boat builders and sailors. We understand your questions and provide the right answers.
Contact experts

More Products from Category Terminals

Cone sets for HI-MOD terminals 1x19
Cone sets for HI-MOD terminals 1x19
Cone sets for 1 x 19 strand wire rope with HI-MOD terminals. PETERSEN STAINLESS RIGGING LTD, a manufacturer of high quality stainless steel rigging components, has developed the well known NORSEMAN terminals under the new brandname HI-MODE.These high precision terminals, manufactured in England from stainless steel 1.4404 (AISI 316L), are stronger dimensioned than the breaking load of the strongest wire fitting for them. The newly developed cone with crown ring enables the very simple and safe fitting to the wire with on-board means, that is without milling and pressing. There is no need anymore for sealants when fitting the wire and cones are reusable if undamaged. These cone sets (cone and crown ring) are exclusively for using wire ropes with the construction 1 x 19 (wire for shrouds).

From €19.90 *
Details
Cone sets HI-MOD for wire 7x7 and 7x19 (for terminals)
Cone sets HI-MOD for wire 7x7 and 7x19 (for terminals)
PETERSEN STAINLESS RIGGING LTD, a manufacturer of high quality stainless steel rigging components, has developed the well known NORSEMAN terminals under the new brandname HI-MODE.These high precision terminals, manufactured in England from stainless steel 1.4404 (AISI 316L), are stronger dimensioned than the breaking load of the strongest wire fitting for them. The newly developed cone with crown ring enables the very simple and safe fitting to the wire with on-board means, that is without milling and pressing. There is no need anymore for sealants when fitting the wire and cones are reusable if undamaged.These cone sets can only be used for flexible 7 x 7 and 7 x 19 strand wire rope constructions.

From €17.30 *
Details
Cones for NORSEMAN terminals 1x19
Cones for NORSEMAN terminals 1x19
NORSEMAN cones for 1x19 strand rope construction.

€17.20 *
Details
Cones for NORSEMAN terminals for wire 7x7 and 7x19
Cones for NORSEMAN terminals for wire 7x7 and 7x19
NORSEMAN cones for 7 x 7 and 7 x 19 strand rope construction.

€14.90 *
Details
Fork terminal NORSEMAN
Fork terminal NORSEMAN
NORSEMAN terminal, famed worldwide for decades! Made from 1.4401 stainless steel.The terminal dimensions are so large that it has a higher breaking load than the matching wire. These terminals can be attached to the wire onboard, without milling or pressing. Intended for 1 x 19 stainless steel wires and DYFORM. When the cone is replaced, the terminal can be reused. The standard design is usable for 1 x 19 wire. For 7 x 19 or 7 x 7 constructions, extra cones must be ordered!

From €37.90 *
Details
Swageless eye terminal HI-MOD
Swageless eye terminal HI-MOD
PETERSEN STAINLESS RIGGING LTD, a manufacturer of high quality stainless steel rigging components, has developed the well known NORSEMAN terminals under the new brandname HI-MODE.These high precision terminals, manufactured in England from stainless steel 1.4404 (AISI 316L), are stronger dimensioned than the breaking load of the strongest wire fitting for them. The newly developed cone with crown ring enables the very simple and safe fitting to the wire with on-board means, that is without milling and pressing. There is no need anymore for sealants when fitting the wire and cones are reusable if undamaged. It is necessary to order special cones for wire constructions 7 x 19 und 7 x 7. One Cone for wire 1 x 19 is included. Additional designs of swageless compression terminals for wires up to 26 mm are available (prizes on request). A detailed application instruction comes with the shipment.

From €39.90 *
Details
Swageless fork terminal HI-MOD
Swageless fork terminal HI-MOD
PETERSEN STAINLESS RIGGING LTD, a manufacturer of high quality stainless steel rigging components, has developed the well known NORSEMAN terminals under the new brandname HI-MODE.These high precision terminals, manufactured in England from stainless steel 1.4404 (AISI 316L), are stronger dimensioned than the breaking load of the strongest wire fitting for them. The newly developed cone with crown ring enables the very simple and safe fitting to the wire with on-board means, that is without milling and pressing. There is no need anymore for sealants when fitting the wire and cones are reusable if undamaged. It is necessary to order special cones for wire constructions 7 x 19 und 7 x 7. One Cone for wire 1 x 19 is included. Additional designs of swageless compression terminals for wires up to 26 mm are available (prizes on request). A detailed application instruction comes with the shipment.

From €49.90 *
Details

Last seen products