Manual windscreen wiper

Manual windscreen wiper made from chromed brass, the wiper arm is made from stainless steel.The wiper arm is adjustable from 190 to 290mm, length of the wiper blade is 280mm.Shipping as turnkey set.

From €14.90 *

Details

Parallel windsceen wiper arm for ROCA W38

You can use the ROCA configurator to plan your windscreen wiper system.Parallel wiping arm for ROCA windscreen wiper W38. Made from stainless steel, painted black.For shaft diameter 11,3mm.

€219.00 *

Details

ROCA windscreen wiper rocker switch

One-step or two-step plastic rocker switches for one stepped or two stepped windscreen wiper motors. With windscreen wiper symbol, For mounting into a control panel the switches can be inserted with an optional small mounting frame. The frame is not included and must be ordered separately (check "Similiar Products").Measurements: H x B x T 49 x 24 x 38mmColour: black.

From €42.99 *

Details

ROCA windscreen wiper switch mounting frame

For mounting into a control panel the windscreen wiper switch can be inserted with this small mounting frame.Mounting frame installation dimensions H x B x T: 48 x 24 x 28mm.Colour: black.

€10.90 *

Details

Windscreen Fittings chrome plated DAVEY 8750

Shapely wind screen fittings for small classic motor boats from the british specialist DAVEY.With this set of fittings you may install a raked windscreen.The three part fitting set (one centre bracket and a pair of side brackets) is made from heavy cast chrome plated gunmetal.The wind screen (not included) is to be screwed into the middle fitting and fixed to the side brackets with mastic..Comes without the glass pane.Form and dimensions of the glass (or perspex) windscreen must be designed and produced individually.

From €775.00 *

Details

Windscreen wiper blades for ROCA W12

You can use theROCA configurator to plan your windscreen wiper system.Various sizes of wiping blades for ROCA windscreen wiper W12 made from zinc plated steel, painted black are available.

From €17.50 *

Details

Windscreen wiper blades for ROCA W38

You can use the ROCA configurator to plan your windscreen wiper system.Varoius sizes of wiping blades for ROCA windscreen wiper W38 made from stainless steel painted black.

From €69.00 *

Details

Windscreen wiper motor ROCA W12

You can use the ROCA configurator to plan your windscreen wiper system.Powerful windscreen wiper motor with 12 Nm torque, splash water protected according to IP65. Two speed levels, wiping angles variably adjustable from 45° to 110°.For single wiper arms type W12.Motor sizes: 170 x 100 x 59mm, alternatively for material thickness of 16 or 42mm.Variuos wiping arms and blades made from stainless steel painted in black are available. ROCA windscreen wipersROCA windscreen wiper motors and machine heads are powerful and of high quality.The automatic retraction to the parking position can be freely positioned to either the right or to the left.Shipping in 12 or 24 Volts.

From €156.90 *

Details

Windscreen wiper motor ROCA W38

You can use the ROCA configurator to plan your windscreen wiper system.The most powerful windscreen wiper motor by ROCA with a torque of 38 Nm for parallel wiper arms W38 and wiper blades of up to 90cm in length.Continuously adjustable variable wiping angle of 45° to 110°, two speeds (slow: 40 wipes p.m. or fast: 60 wipes p.m.).The parking position can be freely positioned to either the right or to the left.Motor size: 210 x 110 x 125mm, alternatively for material thickness of 25 or 50mm.The complete system consists of motor, parallel wiper arm and wiper blade. Wiper arm and wiper blade are not included and must be ordered separately. (Check "Similiar Products" below).ROCA windscreen wipersROCA windscreen wiper motors and machine heads are powerful and of high quality.The automatic retraction to the parking position can be freely positioned to either the right or to the left.Shipping in 12 or 24 Volts.

From €449.00 *

Details

Windscreen wiper ROCA W05

You can use the ROCA configurator to plan your windscreen wiper system.Compact windscreen wiper for small boats, with a torque of 5 Nm.Shipping as turnkey set with a wiper arm from black varnished stainless steel, adjustable in length (280-355 mm) and a wiper blade black varnished zinc plated steel with a length of 280 mm.Shaft diameter 6 mm.The wiping angle is adjustable to 90° or 110°. Size of motor: 58 x 82 x 82 mm. Maximum wall thickness 20 mm.An optional spare wiper blade is available.ROCA windscreen wipersROCA windscreen wiper motors and machine heads are powerful and of high quality.The automatic retraction to the parking position can be freely positioned to either the right or to the left.Shipping in 12 or 24 Volts.

From €134.90 *

Details

Wiping arms for windscreen wiper ROCA W12

You can use the ROCA configurator to plan your windscreen wiper system.Various types and sizes of wiping arms for ROCA windscreen wiper W12. Made from stainless steel, painted black.Adjustable length.For shaft diameter 13,8mm.

From €42.90 *

Details

Mon - Fri:	09 am - 06 pm
Sat:	09 am - 01 pm