Go to homepage
€0.00*
Jobs
Catalogue
Quick order

Accessory to MURRAY Winches: Massive hand-polished cast-bronze fairlead.
The fairlead can be screwed directly to the mounting plate for the MURRAY winch and allows the line to run cleanly.
Questions about the product?

Similar products

Sheet winch MURRAY MINOR
Sheet winch MURRAY MINOR
Mid-sized MURRAY Minor, with top cleat.Intended as a sheet winch for boats up to 11 meters long.Type 4C stands out for it's low profile. Also a good halyard winchComes complete with winch handle.MURRAY Winches: Proven for decades, Murray halyard and sheet winches, made of high-tensile polished manganese-bronze, stand out through:- Simple and therefore exceptionally robust cast-bronze construction;- A crank lever that can be inserted underneath (with a locking mechanism);- A cleat on top of the winch;- Direction of rotation that can be changed through reversing the pawls;- Easy to fit.;- Always comes with a winch handle and hand crank!Well-known round-the-world sailors Eric Hiscock and Lin and Larry Pardey appreciate the exceptional characteristics of these winches: The crank lever in the bottom of the winch doesn't move when the winch is used, thus the handle is almost never lost. The cleat on the top works as a self-tailer or, if installed as a halyard winch on the mast, as a cleat for the halyard!

From €970.00 *
Details
Winch bracket for MURRAY no.4/5
Winch bracket for MURRAY no.4/5
Accessory to Murray Winches:Massive cast bronze bracket, with which a winch can be fastened directly to the outer side of the cockpit coaming.Winch and fairlead sold separately.

From €219.00 *
Details

Last seen products

More articles from this category

Bronze winch base SPARTAN
Bronze winch base SPARTAN
Universal winch base.This platform is be mounted on the cockpit coming and offers a stylish, functional and very robust base for a winch.Made of high-tensile seawater resistant cast bronze with tumbled matt finish.The winch-mounting surface is undrilled and can therefore be used with various winch models. The platform is also available in various angles.Screw joints on deck and on the coaming.Built by the American manufacturer SPARTAN.Winches sold separately.

From €175.00 *
Details
Sheet winch ANDERSEN STANDARD
Sheet winch ANDERSEN STANDARD
The stainless steel winches of the Danish manufacturer ANDERSEN are simply perfect: Light, robust, corrosion-proof and functional. The sheet is held excellently with little tension on the flat polished drum with Power Rib® finish. Single-gear winch for small boats, works with standard winch handles with 11/16" 8-point sockets. Made entirely of polished 316 stainless steel.Shipping without the handle. These winches are also available with bronze-colored surface protection on request. Technological perfection, low weight, excellent resistance to corrosion and an unadorned timeless design make these beautiful winches by the Danish manufacturer ANDERSEN stand out for now more than 60 years. The exclusively by ANDERSEN developed Power Rib® surface of the high-gloss polished stainless steel drums provide for excellent grip to the cordage at very low rope wear out. Also the inner parts made of stainless steel and high tensile aluminium bronze warrant reliability at a small maintenance effort for decades.

From €207.00 *
Details
Sheet winch ANDERSEN CLASSIC
Sheet winch ANDERSEN CLASSIC
A true classic winch used on many one-design classes (Dragons, H-Boats, Folkeboats, etc.).With all of the benefits of Andersen standard winches from danish production.Particularly notable on these winches for smaller boats is the flat, underlying, removable crank.Comes with crank.Made from polished 316 stainless steel. These winches are also available with bronze-colored surface protection on request. Technological perfection, low weight, excellent resistance to corrosion and an unadorned timeless design make these beautiful winches by the Danish manufacturer ANDERSEN stand out for now more than 60 years. The exclusively by ANDERSEN developed Power Rib® surface of the high-gloss polished stainless steel drums provide for excellent grip to the cordage at very low rope wear out. Also the inner parts made of stainless steel and high tensile aluminium bronze warrant reliability at a small maintenance effort for decades.

From €542.00 *
Details
Sheet winch underdeck ANDERSEN CLASSIC
Sheet winch underdeck ANDERSEN CLASSIC
Winch with underdeck handle. A true classic for many classes (daysailers, Dragons, H-Boats, Folkboats, etc.).With all of the benefits of the danish Andersen standard winches. The drum is identical to the drum of the ANDERSEN typ 101. Particularly notable in these winches for small boats is the long winch-handle axle with fixed handle (which keeps the deck clear because the handle is moved below deck). Available with axle in three lengths.These winches are also available with bronze-colored surface protection on request. Technological perfection, low weight, excellent resistance to corrosion and an unadorned timeless design make these beautiful winches by the Danish manufacturer ANDERSEN stand out for now more than 60 years. The exclusively by ANDERSEN developed Power Rib® surface of the high-gloss polished stainless steel drums provide for excellent grip to the cordage at very low rope wear out. Also the inner parts made of stainless steel and high tensile aluminium bronze warrant reliability at a small maintenance effort for decades.

From €575.00 *
Details
Winch handle ANDERSEN
Winch handle ANDERSEN
Stainless-steel winch handle from the renowned Danish winch manufacturer ANDERSEN. Flat stainless steel body with strong black plastic handle. Standard 8-point locking 11/16" socket.

From €106.01 *
Details
Service kit & spare parts ANDERSEN
Service kit & spare parts ANDERSEN
Winches should be serviced regularly. To do this, remove the drum and remove the old grease. The moving parts such as gear wheels, axles and pawls should be greased again with winch grease. The springs, brackets and clamps or snap rings should be replaced regularly to prevent wear. This gives the winches an almost unlimited service life.Spare parts kits containing the most important wear and spare parts are available for all ANDERSEN winches. To find out which spare parts kit is the right one for your winch, you will find instructions (e.g. for determining the age of the winch) further down on this page under "Downloads & Information".The black plastic covers (disc springs) and suitable winch grease for maintenance can be found under "Matching items" further down on this page.Contents of the kits:Servicekit #1:(for 12ST bis 28ST, 40ST, 40ST FS untill 2006)1 Screw M6x121 Screw M6x104 Spring 5335002 Pallen 7132001 Palle 5334004 Armspring 7133002 Ball, Stainless steel 7249002 Ball POM 7249021 Retaining ring 7266001 Locking pin DIN 1481 3x101 Circlip 7278001 Circlip 590300UServicekit #4:(for 10, 16, 28, 40, 46)1 Circlip 7160011 Circlip 7128004 Pawl 7132008 Armspring 713300Basiskit #6:(for 6, 10, 16, 28, 40, 46, 48)5 Circlip 71280010 Armspring 713300Servicekit #8:(for 52ST)2 Screw M6x161 Screw1 Screw M6x81 Screw 5831008 Spring 5335004 Pawl 5334002 Ball, Stainless steel 5263012 Ball POM 5663021 Retaining ring 5266004 Bushing composite 5256001 Circlip 590600U1 Circlip 591000U1 Circlip 590200Servicekit #10:(for all)10 Spring 53350010 Spring 713300Servicekit #12:(for 58ST, 62ST)4 Screw M8x168 Spring 5335004 Pawl 5334002 Ball, Stainless steel 5263012 Ball POM 5663021 Retaining ring 2545002 Bushing composite 5256012 Bushing composite 5256001 Circlip 590400U1 Circlip 5934002 Bushing 786600Servicekit #14:(for 90, 91, 92)1 Screw M6x101 Seergering 101 Seergering 8x0,81 Spring 5905001 Nylon washer 9612001 Delrin washer 9616001 Pawl 9620001 Upper cover washer 964600Servicekit #15:(for 100, 101, 102)1 Screw M6x101 Screw M8x161 Seergering 101 Seergering 8x0,81 Spring 5905001 Nylon washer 9652001 Bronze washer 9647001 Pawl 9663001 Upper cover washer 964600Servicekit #16:(for 6)1 Screw M8x161 Space-washer1 Pawl1 ArmspringServicekit #17: (for ST46 1997 until july 2006) 8 Spring 713300 4 Pawl 713200 5 Bushing 981400 2 Ball Stainless 724900 2 Ball POM 724902 1 Circlip 523500 1 Circlip 590300U 1 Screw M6x16 ISO7380-A4-M6X16 1 Screw M6x16 583600Servicekit #18:(for 12ST FS, 18ST FS, 28ST FS from 2006)1 Screw M5x121 Screw M6x121 Screw M4x124 Pawl 7132001 Pawl 5334008 Armspring 7133004 Spring 5335001 Bushing 729501Servicekit #19:(for 46ST from 2006)1 Screw M6x124 Bushing 9814004 Pawl 7132008 Armspring 7133001 Circlip 590300U1 Screw M6x12disc ring:for 40ST (until 12/2005): R-RA 535500for 40ST (from V.3.0): R-RA 535510

From €36.50 *
Details
Grease for winches ANDERSEN
Grease for winches ANDERSEN
Grease for sheet and halyard winches. Special product of the manufacturer ANDERSEN, recommended in particular for ANDERSEN winches.Tube of 75 g.

€27.91 *
Details
ANDERSEN Plastic disc ring
ANDERSEN Plastic disc ring
Replacement plastic ring (Disc Spring) for Andersen winches.The size of the rings varies depending on the model and year of manufacture.In the table below you will find the right ring for your Andersen winch.

From €36.00 *
Details
Sheet winch WILMEX
Sheet winch WILMEX
Small bronze winch with winch handle socket on top.Replica of the classic Merriman winches.Massive cast-bronze drum, stainless steel pawls and springs.Comes in polished or chromed bronze.Winch handle sold separately.

From €1,018.00 *
Details
Winch handle for halyard winch No.1 WILMEX
Winch handle for halyard winch No.1 WILMEX
Flat bronze winch handle, polished or chromed finish.With spring-loaded lock.Sold without winch!

From €164.01 *
Details
Winch handle for sheet winch WILMEX
Winch handle for sheet winch WILMEX
Flat bronze winch handle, polished or chromed finish.With spring-loaded lock.Sold without winch!

From €299.00 *
Details
Teak winch handle holder
Teak winch handle holder
Cockpit winch-handle pocket, screws-in.Made from strong laminated teak, sanded, unvarnished.

€58.91 *
Details
Winch handle holder BARTON
Winch handle holder BARTON
Smart fitting for holding winch handles with 8-point 11/16" sockets when they're not in use.Screws-in. Made from black plastic.

€8.29 *
Details
Winch handle holder PVC
Winch handle holder PVC
Cockpit winch-handle pocket, screws-in.Made from soft white PVC.

€19.90 *
Details
iWINCH bit for cordless drills
iWINCH bit for cordless drills
With the iWINCH bit on a powerful cordless screwdriver (>60 Nm), anchor, halyard and sheet winches can be operated electrically on board.The 11/16" hexagon fits all common winches, the screwdriver must have a 13 mm drill chuck.The adapter is made in Sweden from hard anodised aluminium.

€49.90 *
Details
Bronze sheet winch HUTTON - ARCO (GIBB)
Bronze sheet winch HUTTON - ARCO (GIBB)
This classic bronze standard winch can be used as a snubbing winch, a halyard winch or a trim-line winch, as well as a sheet winch.Produced by the manufacturers of the old BARLOW / BARIENT winches, which are out of business since decades.One- and two-gear winches available, both with standard 11/16" eight-point winch handle socket.The winches are made entirely from high-tensile, seawater-resistant bronze, only the handle socket and the finely engraved cover plate are made of stainless steel.HUTTON - ARCO (GIBB - ARCO) - quality winches, finished in Australia on CNC-directed machines, with decades of experience in winch building. Rust-free roller bearings in nylon frames. ARCO-HUTTON winches are notable for their thin form, light weight and easy, quiet movement. The textured drum allows for higher grip, even with slippery lines. These classic winches are not only technically perfect, but are also a piece of art on the deck of any classic yacht.We supply the winches also in pairs for better pricing.

€261.00 *
Details
Winch handle floatable
Winch handle floatable
Very light, floating plastic winch handle.A practical handle for small loads.Colour: gray with red grip.Molded aluminum 11/16" eight-point locking socket.Weighs only 310 g.

€34.50 *
Details
Teak winch bases straight
Teak winch bases straight
With this shaped, straight teak winch pad, sheet winches can be matched exactly to the direction of pull.Undrilled and unfinished. Height 30 mm.

From €29.90 *
Details
Teak winch bases slanted
Teak winch bases slanted
With these angled teak pedestals, sheet winches can be matched to the pulling direction of the sheet. Undrilled and unfinished. Sanded to a 15° angle. Max height 30 mm.

From €37.50 *
Details
Sheet winch MURRAY MINI
Sheet winch MURRAY MINI
Compact single speed winch, suitable as sheet or halyard winch for boats up to about 7m, alternatively as reef or jigger winch of up to 12m length. shipping with or without cleat on top. - Robust construction from marine bronze- the handle is plugged in at the bottom (with safety catch)- direction of turns are switched by pawls, - simple maintenance. As Type 1H or 1CH with flexible base for mounting on a rounded spa (mast or boom). With the flexible mounting brackets the winches can be attached directly to the spar, without the need for a intermediate plate. Comes complete with bolt-on handle.

From €458.99 *
Details